Author Topic: Husqvarna 543xp  (Read 2321 times)

0 Members and 0 Guests are viewing this topic.

Offline Bluegill

  • 5 cube
  • ***
  • Posts: 141
  • Karma: 22
Re: Husqvarna 543xp
« Reply #10 on: August 29, 2013, 07:31:31 pm »
I bet it's not the same saw as the Zenoah, but we'll see.

I'll be getting one!  ;D

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22584
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 543xp
« Reply #11 on: August 29, 2013, 07:45:10 pm »
Scratch it off my list then.

Ah come on Art

The Redmax 5000 and 3800 were good saws. This one might be too.     But it better be $100 less then a 545 IMO, not more like I am hearing.
The 545 is only 9/10ths of a lb heavier. Seems they may have missed on this one.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22584
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 543xp
« Reply #12 on: August 29, 2013, 08:14:56 pm »
I bet it's not the same saw as the Zenoah, but we'll see.

I'll be getting one!  ;D

Bet  ;)



http://blogs.yahoo.co.jp/asisuto11/folder/734239.html

REDNECK Saw Repair Getter Done

Offline Old Iron Logging

  • Nitro Hotsaw
  • *******
  • Posts: 1134
  • Karma: 82
Re: Husqvarna 543xp
« Reply #13 on: August 29, 2013, 08:32:26 pm »
Pre Husky Redmax I have no trouble with. The 5000 and 3800 were/are great saws.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22584
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 543xp
« Reply #14 on: August 29, 2013, 08:34:22 pm »
LOL they removed the photos showing they were the same saw.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22584
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 543xp
« Reply #15 on: August 29, 2013, 08:50:56 pm »
way smaller, guess I should have saved the first batch  :D :D 




REDNECK Saw Repair Getter Done

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Husqvarna 543xp
« Reply #16 on: August 29, 2013, 09:09:40 pm »
Translation of some comments from that thread . . .


It is a motor mount Husqvarna 543XP chain saws and chain saw Zenoah GZ4300EZ. Husk 543XP is the same as the Zenoah GZ4300EZ chain saw. There is also the part that is changed slightly to other husk orange color of course, color. One of the motor mount

Is. I was interested if I also whether they made prior to the release here. Motor mount and shape Husk 346 is different GZ4300EZ. Guide bar universal mount type of the (combined type) type can be attached to both Genoa and husk, but the husk genuine bar

You can not be installed if you do not spread the processing if the chain tension nut insertion hole for attaching to Zenoah. If motor mount is the difference? 543XP and GZ4300EZ are the same.
If guide bar is different? Husk 543XP is installed genuine Husqvarna guide bar

You can. But it does not come in attached to the GZ300EZ. There is a change in the clutch cover of Husk 543XP to say if why I can be attached. It is not a shape change and parts change.
This is the nut of the chain tension screw. In Husk 543XP and Zenoah chainsaw GZ4300EZ

Mounting of the tension nut is different. It is attached to fit the hole-insert chain tension nut of the guide bar of GZ4300EZ. Husk 543XP is to be attached to chain tension nut plug holes in the husk guide bar is mounted upside down this tension nut

Has become! It can also be used, such as husk genuine guide bar 13 inches pixels Zenoah chainsaw GZ4300EZ to be attached to reverse the nut and this happens! You can also use the Zenoah 543XP even in reverse! Replacement to reverse the nut and remove the plate if one tool
I can easily change the mount. I do not need the guide bar processing!

Image 2

Autumn is good




I was entrusted with the repair Zenoah chainsaw GZ3500T from H farm machinery's the other day.


The symptoms I'm told that the best starting of the engine, but the engine is unlikely to stop the engine speed down and gradually make blown by turning on the accelerator.
It does not increase the fuel, ... and press the primary pump and try to start the engine for the time being?

Fuel does not come up only half the pump light. Engine blows to start smoothly when you start to choke, but you stop when you return the accelerator. It does not stop when you adjust fuel but the engine stop and stone when I put the accelerator in a row.

It seems to have been broken down once ..... Exploding a carburetor fuel does not come up first.
It seems to wash the carburetor several times I asked to H's agricultural machinery. Check valve is wrong and you have cleaned the carburetor ......

Not stop even blowing smoked by applying the pipe (ToT)
It is like a bad carburetor. I tried half a day immersed in fuel, but does not change.
Do you broke when you wash the carburetor?

Remove the spark arrester and remove the muffler to order the carburetor. I did not think the cause and whether this arrester when I heard first, but it is a problem so that carbon is only with a little, but you removed just in case. And primary Replace carburetor today because I received

Swill fuel comes up when you pump the pump! The ~ but it is after all this
And start as soon as you start the engine! And you stop ..... and back the accelerator to let blown!
Pattern! ? Does not change when you adjust (ToT)

Coil was attached with two dangling comes off it ..... screw Looking at the coil by removing the starter? Coil is corrupt in contact with the rotor.
I rubbed the engine is started in this well!

Coil is turned reject product anymore. There is no one spacer. I've fallen and Porori starter from one another (-_-;)
I do notice the sound and pull starter, but usually I was not aware at all this time ... ...

And coil had been excluded from the beginning at all engine since the start.
Was condemned carburetor is bad is failure. It has become a repair of duplication of effort, ...



I did the adjustment of GZ4300EZ demonstration machine today!


I tried to start the engine of GZ4300EZ demonstration machine in one months in that you say when you're wondering M's or try to buy the GZ4300EZ yesterday, and want to start the demonstration machine.
I did come back last month lent to N agricultural machinery's about a month, but such as fuel input as it is Reppa

Could you start the engine immediately! But blows? ? Blow something bad in comparison with when commissioning GZ3900EZ towards GZ3900EZ was so sold recently? Not bad but not good enough feeling was pick-up.

Spark arrestor has been removed to the manufacturer at the time of shipment and GZ4300EZ GZ3900EZ recent. It is a chain saw factory first GZ4300EZ My condition therefore you are still attached.

Blown GZ3900'm pretty good! So I was feeling not good enough.
So I decided to commissioning Remove evening today.
Because it has been removed on the maker's more, can be safely removed If anyone you are with the

I do not think there. Screw is equipped with one on when I remove the muffler.
Please pull out next to the network by removing the screw. I think that it can be removed easily. After Install the screw to (it seems may not be installed)

I Install the muffler. Commissioning start back to the initial adjustment! !
It is the end by adjusting the carburetor ♪ It is good people of this place at all! !
It seems to be a good person of the GZ4300EZ after all!

At the same difference of GZ4300 and GZ3900 is not the only engine.
Crank shaft is different. Is not compatible to the crank shaft of G3711EZ and GZ3900 but shaft diameter of the clutch drum side G3900EZ and G3711EZ is

You can be used, such as the clutch drum is common because it is the same. The clutch should now also common. I was able to be used in common parts and G3711EZ the same G4211EZ it, but the crank shaft diameter is different GZ4300 and GZ3900 this time.

GZ4300EZ will be able to be used in common clutch drum and G4501 diameter thick.
And you are now able to be from the shaft tip portion also grease up the familiar, such as husk 346XP. This looks a good thing!

I think that it would be GZ4300 is the specifications of the higher-grade because there is a different part at any engine other than GZ4300 and GZ3900.
Worm gear is the same type as the G4501 and the GZ3900, GZ4300 After

Has become. It is may damage the gear also is low in this.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22584
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Husqvarna 543xp
« Reply #17 on: August 29, 2013, 09:13:56 pm »
seal the deal, plus I got more saved this time.  ;)

REDNECK Saw Repair Getter Done

Offline Bluegill

  • 5 cube
  • ***
  • Posts: 141
  • Karma: 22
Re: Husqvarna 543xp
« Reply #18 on: August 30, 2013, 09:43:57 am »
I spoke before I saw the photos on the other site. Looks mighty close, but there will be differences, maybe very small ones. ;)

I have no problem with made in Japan and have heard good stuff about Redmax. So we'll see how it pans out. Thanks for all the info!

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4338
  • Karma: 189
  • OHIO REDNECK
Re: Husqvarna 543xp
« Reply #19 on: August 30, 2013, 11:46:32 am »
2 more I saved yesterday

REDNECK Saw Repair

 

Related Topics

  Subject / Started by Replies Last post
22 Replies
8112 Views
Last post April 25, 2012, 05:04:00 pm
by SawTroll
2 Replies
231 Views
Last post March 04, 2012, 02:35:58 pm
by Cut4fun .
Husqvarna 455

Started by Cut4fun « 1 2 3 4 » Husqvarna

33 Replies
2952 Views
Last post April 02, 2021, 07:54:35 am
by Cut4fun
1 Replies
354 Views
Last post October 09, 2012, 08:11:26 pm
by Cut4fun .
Husqvarna 345

Started by Cut4fun « 1 2 » Husqvarna

10 Replies
744 Views
Last post December 22, 2012, 10:18:38 pm
by mweba
Husqvarna 372 XP

Started by Hill Billy « 1 2 ... 8 9 » Husqvarna

85 Replies
3014 Views
Last post February 26, 2013, 09:24:02 pm
by Hill Billy
Husqvarna 338XPT

Started by Cut4fun . « 1 2 ... 7 8 » Husqvarna

76 Replies
3807 Views
Last post May 02, 2021, 01:00:10 pm
by HolmenTree
Husqvarna 353

Started by Cut4fun « 1 2 ... 10 11 » Husqvarna

106 Replies
5917 Views
Last post April 26, 2018, 02:14:09 pm
by Cut4fun .
28 Replies
867 Views
Last post April 19, 2014, 08:52:39 pm
by Cut4fun .
41 Replies
2811 Views
Last post December 30, 2014, 09:44:24 pm
by SawTroll