Author Topic: Husqvarna 555 to 560xp (Read 1486 times)

Cut4fun · « **Reply #10 on:** December 31, 2012, 02:03:58 pm »

Mitch did the rev-boost work on this 555 with the software you installed? Being 555 dont have the rev-boost stock. I had always thought the rev-boost was a timing thing in the coil.

What is your take on this?

brokenbudget · « **Reply #11 on:** December 31, 2012, 02:53:06 pm »

Quote from: Cut4fun on December 31, 2012, 01:54:27 pm

I would bet on Mitch getting it to work over anything a rep says. Lets just wait and see how it turns out.

Of course it's got to get past these weak case issues first and plastic caged bearings. Holy Crap

husky engineering at it's best. they need to revise a few times before getting it right.

like i said, this is only the info i recieved. from mutiple dealers and one rep. (i have 5 dealers/service centers in driving distance). never said it would/wouldn't work, just that husqvarna is telling them around here to watch out when working on them. basicly covering their asses if a problem arises.

mweba · « **Reply #12 on:** December 31, 2012, 04:44:42 pm »

Quote from: Cut4fun on December 31, 2012, 02:03:58 pm

Mitch did the rev-boost work on this 555 with the software you installed? Being 555 dont have the rev-boost stock. I had always thought the rev-boost was a timing thing in the coil.

What is your take on this?

I couldn't tell you if the 62 had it or not lol. Seat of the pants feel, they are identical. No proof either way.

Cut4fun . · « **Reply #13 on:** January 14, 2013, 01:07:27 pm »

How's it running now after back together? Must be nice to have them special tools on hand now.

mweba · « **Reply #14 on:** January 14, 2013, 01:17:26 pm »

So far so good. The owner is happy and so was I. It runs just like a 562 with a MM. Quick and strong in the cut.

Untitled by mweba1, on Flickr

Making room for the stuffers, the reason the first bearing went south.

Untitled by mweba1, on Flickr

mweba · « **Reply #15 on:** January 14, 2013, 01:19:01 pm »

Moonlighting

http://www.youtube.com/watch?v=ekENijpOx6E

Chainsaw Repair

News:

Author Topic: Husqvarna 555 to 560xp (Read 1486 times)

Cut4fun

Re: Husqvarna 555 to 560xp

brokenbudget

Re: Husqvarna 555 to 560xp

mweba

Re: Husqvarna 555 to 560xp

Cut4fun .

Re: Husqvarna 555 to 560xp

mweba

Re: Husqvarna 555 to 560xp

mweba

Re: Husqvarna 555 to 560xp

Related Topics