Author Topic: Husqvarna k760 speed problen (Read 177 times)

Vikmata · « **on:** October 30, 2017, 10:56:39 am »

I have replaces the piston and sparplug but stays the same until time goes by then it warms up and cuts fine but if i run out of gas by the time i start it again is the same thing.

Can it be a clutch problem?

Cut4fun . · « **Reply #1 on:** October 30, 2017, 04:24:31 pm »

@3000 FPS has messed with these.

3000 FPS · « **Reply #2 on:** October 30, 2017, 06:53:53 pm »

I would check the belt on it to make sure it is in good shape and has the correct tension. Then I would check the clutch to make sure it is in good shape.

If the engine is running ok but the blade has stopped spinning when cutting into concrete or pavers then it is not the carb.

Chainsaw Repair

News:

Author Topic: Husqvarna k760 speed problen (Read 177 times)

Vikmata

Husqvarna k760 speed problen

Cut4fun .

Re: Husqvarna k760 speed problen

3000 FPS

Re: Husqvarna k760 speed problen

Related Topics