Author Topic: Husqvarna 372 XP X-TORQ  (Read 775 times)

0 Members and 0 Guests are viewing this topic.

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: Husqvarna 372 XP X-TORQ
« Reply #10 on: October 02, 2013, 10:06:41 am »
do you have to use an xtorq piston of will a standard 372 piston work? I have a 2011 model 365 xtorq with screwed up head and piston. ive only ever honed out 1 cylinder before not sure if this one is saveable. now that I cleaned it up it looks like a possibility to save it but I can only find a 51mm hone on baileys and not a 50mm. any advice?
:-)
The 375BB kit is THE way to go! If you really want to make it go use a stihl 064 52mm piston in place of the BB piston. You will have to mess with base gaskets to get correct squish and remove some metal from inner PP bosses to fit the piston to the rod but the results are well worth it. Also you can use the XT carb and intake to get more fuel delivery.

Makes a very strong runner!
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline stihls066

  • 6 cube
  • ****
  • Posts: 155
  • Karma: 7
  • Location: northern ca.
Re: Husqvarna 372 XP X-TORQ
« Reply #11 on: October 10, 2013, 01:51:35 pm »
thanks for the advice guys. didn't mean to take over someone elses post though so sorry. its still sitting in the shop I have not decided what ima do with it. im think for my area doing it back to stock would sell the best just not sure I even wanna mess with it.
chainsaws are chainsaws but stihl runs through my veins
Stihl 044,440,046,460,064,066,660,084,088,880
Ht 101,131
Mac sp125,125c,5-49

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: Husqvarna 372 XP X-TORQ
« Reply #12 on: November 06, 2013, 04:23:03 pm »
thanks for the advice guys. didn't mean to take over someone elses post though so sorry. its still sitting in the shop I have not decided what ima do with it. im think for my area doing it back to stock would sell the best just not sure I even wanna mess with it.

What did you decide to do with the 372XT?
Want to sell it as is? PM me
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline labdad

  • 3 cube
  • *
  • Posts: 20
  • Karma: 1
  • Location: southwest Illinois
Re: Husqvarna 372 XP X-TORQ
« Reply #13 on: November 07, 2013, 06:55:09 pm »
Ok so what is the difference between the X-torq  model and the regular 372.  I got lost there. Thanks
Husky 50 Rancher
Husky 359
Brave 26 ton splitter
Ordinary men have excuses Extraordinary men have solutions

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Husqvarna 372 XP X-TORQ
« Reply #14 on: November 07, 2013, 08:43:17 pm »
The X-Torq is a Strato Charged engine with a carb of which the top half is air only and the bottom half is air+fuel (it looks like a single big carb but there is a divider between the throttle shaft and the choke shaft)
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline labdad

  • 3 cube
  • *
  • Posts: 20
  • Karma: 1
  • Location: southwest Illinois
Re: Husqvarna 372 XP X-TORQ
« Reply #15 on: November 07, 2013, 09:13:35 pm »
Excuse me for being a dummy but the air only side exhausts the fired mix and then the gas/oil mixture goes in to be combusted? I'm curious because my local Husky dealer has a used one for  sale and I am kinda  interested in it. So which is the best model to look for? Thanks
Husky 50 Rancher
Husky 359
Brave 26 ton splitter
Ordinary men have excuses Extraordinary men have solutions

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Husqvarna 372 XP X-TORQ
« Reply #16 on: November 07, 2013, 11:04:11 pm »
You are correct on how they work.

You are probably better off with the newer design.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline EHP

  • Gas Hotsaw
  • ******
  • Posts: 589
  • Karma: 72
Re: Husqvarna 372 XP X-TORQ
« Reply #17 on: November 10, 2013, 07:23:08 pm »
And yes on the new XT motors you use the XT piston

Offline EHP

  • Gas Hotsaw
  • ******
  • Posts: 589
  • Karma: 72
Re: Husqvarna 372 XP X-TORQ
« Reply #18 on: November 10, 2013, 07:23:40 pm »
and use lots of oil on your gas

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: Husqvarna 372 XP X-TORQ
« Reply #19 on: November 10, 2013, 08:11:53 pm »
and use lots of oil on your gas

+1, EHP, do not use 50:1 run 32:1!
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

 

Related Topics

  Subject / Started by Replies Last post
10 Replies
2449 Views
Last post May 03, 2011, 09:49:54 pm
by blsnelling
127 Replies
12994 Views
Last post December 26, 2012, 10:16:57 am
by Cut4fun
2 Replies
558 Views
Last post July 23, 2012, 07:49:15 am
by 660magnum
9 Replies
878 Views
Last post November 17, 2012, 09:05:18 pm
by Mw1995
6 Replies
304 Views
Last post June 09, 2014, 08:05:24 pm
by Cut4fun .
8 Replies
164 Views
Last post September 25, 2014, 08:38:08 pm
by aclarke
7 Replies
208 Views
Last post February 28, 2016, 07:32:00 pm
by 660magnum
2 Replies
185 Views
Last post August 22, 2016, 01:46:46 pm
by dannyupsolate
2 Replies
90 Views
Last post May 07, 2018, 02:36:08 pm
by Cut4fun .
4 Replies
128 Views
Last post July 12, 2018, 09:03:40 am
by ray benson