« previous next »
Pages: 1 2 [3] 4   Go Down

Author Topic: Inside the Husqvarna T540  (Read 1372 times)

0 Members and 0 Guests are viewing this topic.

Offline mweba

  • Piped Saw
  • *****
  • Posts: 392
  • Karma: 55
Re: Inside the Husqvarna T540
« Reply #20 on: February 08, 2014, 10:35:28 am »
Sealed oil pump cavity.


100_5150 by mweba1, on Flickr

Metal pump.


100_5151 by mweba1, on Flickr


100_5152 by mweba1, on Flickr

Intake manifold.


100_5153 by mweba1, on Flickr

Where plastic does exist, metal inserts are provided for fasteners.


100_5154 by mweba1, on Flickr

Intake.


100_5155 by mweba1, on Flickr

Muffler


100_5156 by mweba1, on Flickr


100_5157 by mweba1, on Flickr


100_5159 by mweba1, on Flickr

Exhaust.


100_5162 by mweba1, on Flickr

Huge pressure drop....


100_5163 by mweba1, on Flickr

Conventional oil seal.


100_5166 by mweba1, on Flickr

Trans


100_5169 by mweba1, on Flickr

Stuffed


100_5170 by mweba1, on Flickr


100_5173 by mweba1, on Flickr

Bidness


100_5167 by mweba1, on Flickr


100_5177 by mweba1, on Flickr

Exhaust


100_5176 by mweba1, on Flickr

Intake


100_5175 by mweba1, on Flickr

Comb chamber


100_5174 by mweba1, on Flickr


Base gasket .020   Squish .029
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23509
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Inside the Husqvarna T540
« Reply #21 on: February 08, 2014, 10:39:59 am »
Quote from: gunrac on February 07, 2014, 10:48:35 pm
I won't be surprised if you show up tomorrow nite w/that 338......lol  ;)

I have the will power of a stubborn old mule now days. Wont drive 45mins for no saw anymore no matter how cheap.
Years ago I would have been on it like flies on chit.
Logged

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4616
  • Karma: 216
  • OHIO REDNECK
Re: Inside the Husqvarna T540
« Reply #22 on: February 08, 2014, 12:10:19 pm »
Just in case you wanted that video in this thread to. I seen it in the 540T demo thread.

http://www.youtube.com/watch?feature=player_embedded&v=UfEO2XUDFoo
Logged

Offline mweba

  • Piped Saw
  • *****
  • Posts: 392
  • Karma: 55
Re: Inside the Husqvarna T540
« Reply #23 on: February 08, 2014, 12:42:56 pm »
Whoops.  Thanks.    ::)
Logged

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4616
  • Karma: 216
  • OHIO REDNECK
Re: Inside the Husqvarna T540
« Reply #24 on: February 08, 2014, 12:44:21 pm »
Hey Mitch what chain was used in those video test cuts?
Logged

Offline mweba

  • Piped Saw
  • *****
  • Posts: 392
  • Karma: 55
Re: Inside the Husqvarna T540
« Reply #25 on: February 08, 2014, 01:18:37 pm »
Quote from: Cut4fun on February 08, 2014, 12:44:21 pm
Hey Mitch what chain was used in those video test cuts?

Husky 37   3/8 low chip.   Chain it came with.
Logged

Offline mweba

  • Piped Saw
  • *****
  • Posts: 392
  • Karma: 55
Re: Inside the Husqvarna T540
« Reply #26 on: February 09, 2014, 12:02:13 pm »
5-6 tanks


100_5187 by mweba1, on Flickr


100_5188 by mweba1, on Flickr
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23509
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Inside the Husqvarna T540
« Reply #27 on: February 09, 2014, 12:25:58 pm »
Did you try it with just the muffler mod first then went onto porting?  To see how it cut stock, muffler modded, then ported.
Logged

Offline mweba

  • Piped Saw
  • *****
  • Posts: 392
  • Karma: 55
Re: Inside the Husqvarna T540
« Reply #28 on: February 09, 2014, 12:38:53 pm »
Quote from: Cut4fun_ on February 09, 2014, 12:25:58 pm
Did you try it with just the muffler mod first then went onto porting?  To see how it cut stock, muffler modded, then ported.

Yes.  Speed increase was minute.  Made it loader for the most part.  Doesn't like to much ignition advance like other AT saws.
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23509
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Inside the Husqvarna T540
« Reply #29 on: February 09, 2014, 02:35:20 pm »
Quote from: mweba on February 09, 2014, 12:38:53 pm
Quote from: Cut4fun_ on February 09, 2014, 12:25:58 pm
Did you try it with just the muffler mod first then went onto porting?  To see how it cut stock, muffler modded, then ported.

Yes.  Speed increase was minute.  Made it loader for the most part.  Doesn't like to much ignition advance like other AT saws.

Found the video. Looks sweeeeeeet.

http://youtu.be/iQG-R-mp5u0
Logged
Pages: 1 2 [3] 4   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
2 Replies
507 Views 		Last post March 04, 2012, 02:35:58 pm
by Cut4fun .
25 Replies
5013 Views 		Last post February 03, 2013, 01:45:30 pm
by Cut4fun .
2 Replies
379 Views 		Last post November 10, 2012, 12:45:34 pm
by HolmenTree
9 Replies
825 Views 		Last post January 05, 2013, 06:56:11 pm
by JohnG28
3 Replies
829 Views 		Last post September 15, 2013, 10:56:36 pm
by sharkey
5 Replies
318 Views 		Last post November 05, 2013, 04:59:39 pm
by HolmenTree
41 Replies
3947 Views 		Last post December 30, 2014, 09:44:24 pm
by SawTroll
5 Replies
618 Views 		Last post August 24, 2014, 10:40:36 am
by Cut4fun
6 Replies
865 Views 		Last post May 29, 2015, 09:44:42 pm
by dannyupsolate
1 Replies
338 Views 		Last post September 23, 2016, 05:27:42 pm
by Cut4fun .