Author Topic: Leaking 44  (Read 314 times)

0 Members and 0 Guests are viewing this topic.

Offline Hill Billy

  • 4 cube
  • **
  • Posts: 50
  • Karma: 5
Leaking 44
« on: February 11, 2013, 11:15:29 pm »
I have a 44 that leaks bar oil.  I removed the clutch but I can't seem to figure out how to get the next part off.  I have looked at the diagram, but still need help.  Thanks Jason ???  ???

Share on Facebook Share on Twitter


Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 172
Re: Leaking 44
« Reply #1 on: February 11, 2013, 11:38:47 pm »
I believe the drive gear is pressed onto the crank. Husky makes a special tool that threads onto the worm gear to save the gear from puller damage.  Might be cheaper to use a standard puller and buy a new drive gear though.....

Offline Hill Billy

  • 4 cube
  • **
  • Posts: 50
  • Karma: 5
Re: Leaking 44
« Reply #2 on: February 13, 2013, 03:33:44 pm »
Hope I attached three pics .  Last pic shows the clutch and drive gear off, the plate with the three bolts wiggles, but the center "washer??" "spacer??" seems to be holding it on.  I'm not sure how to procede.  Again the lubracating system seems to be leaking and I thought I would clean it up to see if I could get it to stop.  Any help would be great,  thanks again

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22027
  • Karma: 544
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
REDNECK Saw Repair Getter Done

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 172
Re: Leaking 44
« Reply #4 on: February 13, 2013, 06:38:24 pm »
Pull the three screws and you should be able to wiggle the pump off. Might be a little tight as it meshes with the spur gear on the crank

Offline Hill Billy

  • 4 cube
  • **
  • Posts: 50
  • Karma: 5
Re: Leaking 44
« Reply #5 on: February 14, 2013, 03:55:27 pm »
Done, thanks this should make Dad happy!

Offline Hill Billy

  • 4 cube
  • **
  • Posts: 50
  • Karma: 5
Re: Leaking 44
« Reply #6 on: February 14, 2013, 08:19:11 pm »
So can you ever get the lubricating system to not leak on these saws, or what??????

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Leaking 44
« Reply #7 on: February 14, 2013, 08:32:00 pm »
Some chainsaws just insist in leaving their "Mark"
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

 

Related Topics

  Subject / Started by Replies Last post
16 Replies
990 Views
Last post May 21, 2012, 05:10:04 pm
by man of stihl
6 Replies
201 Views
Last post May 02, 2013, 06:43:24 pm
by Al Smith
2 Replies
1424 Views
Last post June 25, 2013, 12:51:42 pm
by Cut4fun .
345 leaking oil

Started by Randy « 1 2 » Husqvarna

10 Replies
405 Views
Last post February 21, 2014, 11:56:08 am
by 660magnum
2 Replies
157 Views
Last post February 25, 2014, 08:19:35 pm
by Eccentric
6 Replies
158 Views
Last post March 18, 2014, 02:14:13 pm
by eriksat1
1 Replies
169 Views
Last post July 08, 2014, 10:51:40 pm
by 660magnum
4 Replies
257 Views
Last post November 30, 2015, 08:11:00 pm
by 3000 FPS
5 Replies
486 Views
Last post November 07, 2016, 05:29:40 pm
by oldpro
11 Replies
578 Views
Last post June 08, 2018, 05:08:23 am
by rupe