Author Topic: meteor 46mm closed port 55 husqvarna p+c  (Read 394 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21948
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
meteor 46mm closed port 55 husqvarna p+c
« on: December 25, 2014, 10:22:50 am »
These meteor kits look like a good replacement. closed port and all 46mm. Dont forget to use the code here for 10% off too.

Meteor brand Nikasil plated cylinder and piston assembly
Made in Italy. Highest quality aftermarket kit.
This is the closest to OEM you will find.
For Husqvarna 55 & 55 Rancher chainsaws
Will work as an oversize kit for the 51 chainsaw
Includes: cylinder, piston, rings, wrist pin, cir clips, pin bearing
Replaces OEM part: 503 16 91-71
46mm bore

http://www.hlsproparts.com/Meteor-Husqvarna-55-cylinder-and-piston-assembly-p/mcc1660.htm



Trying to cheat on pics using a members pics.  Can you see them below?

UPDATE these pics below are actual pics of kits sold here http://chainsawrepair.createaforum.com/used-chainsaw-parts-online/sawsalvage-com-used-and-nos-parts-meteor-piston-and-cylinder-dealer/







REDNECK Saw Repair Getter Done

Share on Facebook Share on Twitter


Offline bloodontheice

  • 6 cube
  • ****
  • Posts: 206
  • Karma: 29
Re: meteor 46mm closed port 55 husqvarna p+c
« Reply #1 on: December 25, 2014, 10:38:29 am »
That'll work, had one given to me yesterday that was set up and cylinder is not salvageable.
These are the only aftermarket cylinders I've had any luck with holding up to my customers
level of abuse and neglect.
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21948
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: meteor 46mm closed port 55 husqvarna p+c
« Reply #2 on: December 25, 2014, 10:50:12 am »
There is cheaper choices out there. But then who knows what you may have to adjust.

http://www.hlsproparts.com/husqvarna-55-51-parts-s/70.htm
REDNECK Saw Repair Getter Done

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: meteor 46mm closed port 55 husqvarna p+c
« Reply #3 on: December 26, 2014, 08:58:18 am »
The transfers looks a bit odd - looks like sort of "halv way" quads, With beefy and short "deviders"? ???

Offline Spike60

  • Piped Saw
  • *****
  • Posts: 329
  • Karma: 104
  • Location: Ulster County, NY
Re: meteor 46mm closed port 55 husqvarna p+c
« Reply #4 on: January 12, 2015, 11:57:42 am »
The meteor link doesn't look at all like a closed port cylinder to me, and shouldn't the closed port kit have a windowed piston? The OEM reference number they show is not even in the Husky system.

And for another $35 I sell the OEM kit, so I don't see a great deal there. (the open port kit, which is the only OEM kit available)
Husqvarna-Jonsered

Ashokan Turf and Timber

845-657-6395
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21948
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: meteor 46mm closed port 55 husqvarna p+c
« Reply #5 on: January 12, 2015, 02:27:38 pm »
Those pictures are actual meteor kit pics taken by @Duke Thieroff   he has in hand.  Dont know what his piston looked like.    http://chainsawrepair.createaforum.com/used-chainsaw-parts-online/sawsalvage-com-used-and-nos-parts-meteor-piston-and-cylinder-dealer/

HL link was just added to post and maybe generic pic as far as I know in their link.   UPDATE  nope found Dukes piston in pic below.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21948
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: meteor 46mm closed port 55 husqvarna p+c
« Reply #6 on: January 12, 2015, 03:52:26 pm »
Found piston. Not windowed piston but IMO cylinder is still a closed port and Randy's Masterminds opinion too.

Duke  Is this considered a closed port Husky 55?

Randy Damn right.......and it appears to be quad ported?



REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21948
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: meteor 46mm closed port 55 husqvarna p+c
« Reply #7 on: January 12, 2015, 03:55:51 pm »
That meteor cylinder and a poulan 325 windowed piston. ;)  Hmmmmm



REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21948
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: meteor 46mm closed port 55 husqvarna p+c
« Reply #8 on: January 12, 2015, 05:55:18 pm »
Here is what I found using online husky dealer ordering.

Description
Cylinder Assembly
Fits Model
   
HUSQVARNA    55 (46 mm) Chainsaw


Replaces OEM
   
Husqvarna    503169171
Husqvarna    503 16 91-71
REDNECK Saw Repair Getter Done

Offline Duke Thieroff

  • 3 cube
  • *
  • Posts: 9
  • Karma: 5
  • Fill your hands, you SOB
  • Location: Beaver County, PA
    • www.SawSalvage.co
Re: meteor 46mm closed port 55 husqvarna p+c
« Reply #9 on: January 12, 2015, 05:57:39 pm »
Found piston. Not windowed piston but IMO cylinder is still a closed port and Randy's Masterminds opinion too.

Duke  Is this considered a closed port Husky 55?

Randy Damn right.......and it appears to be quad ported?





It's the general consensus that it is considered a CP.  I have some very interesting tests coming up shortly involving this specific kit.  Will indeed keep you guys in the loop over here.
Agree Agree x 1 View List

 

Related Topics

  Subject / Started by Replies Last post
3 Replies
249 Views
Last post November 01, 2011, 10:39:04 pm
by Roanoker494
14 Replies
289 Views
Last post March 25, 2013, 07:00:19 pm
by Al Smith
4 Replies
285 Views
Last post July 02, 2013, 09:47:32 pm
by farmboy
10 Replies
320 Views
Last post November 05, 2013, 10:02:57 am
by mdavlee .
3 Replies
70 Views
Last post February 05, 2014, 06:36:36 pm
by 660magnum
15 Replies
721 Views
Last post July 11, 2014, 11:12:16 pm
by DexterDay
24 Replies
343 Views
Last post January 26, 2015, 08:30:50 pm
by Cut4fun .
0 Replies
463 Views
Last post April 07, 2016, 01:41:04 pm
by Cut4fun .
1 Replies
119 Views
Last post June 17, 2016, 04:52:19 pm
by 1manband
4 Replies
264 Views
Last post April 18, 2018, 01:10:06 am
by 660magnum