« previous next »
Pages: [1] 2   Go Down

Author Topic: New 562XP  (Read 325 times)

0 Members and 0 Guests are viewing this topic.

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
New 562XP
« on: March 11, 2014, 08:48:07 pm »
Finally had time to get the 562 I got from Spike60 out of the box today! Very nice saw by the looks of it. however I cannot get used to the silver/gray side clutch cover, would rather have orange! So, had a look at the IPLs and found that the 560 and 562 have what appears to be the same cover but two different PNs. Does anyone know if the 560 cover is orange and will fit the 562?
Logged
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Share on Facebook Share on Twitter

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: New 562XP
« Reply #1 on: March 11, 2014, 11:03:31 pm »
The 560 is small husky mount
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: New 562XP
« Reply #2 on: March 12, 2014, 12:04:04 pm »
The 560 have a "silver" cover, but the 555 has an orange one - and if the 556 ever hits the market, it will have the large bar mount and an orange clutch cover.

I don't really know if the 555 clutch cover matches up with the large bar mount of the 562 - but suspect there are issues with it....
Logged

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: New 562XP
« Reply #3 on: March 12, 2014, 12:41:46 pm »
Thanks Nikko, I suspect you are right on the 555 and 562 covers, they actually have two different part numbers.
Logged
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: New 562XP
« Reply #4 on: March 12, 2014, 03:35:05 pm »
The triple nickel is a small mount just like the 560. The 562XP is large mount husky.
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 149
  • Location: Hayesville, NC
Re: New 562XP
« Reply #5 on: March 12, 2014, 10:10:45 pm »
Doing a little grinding on mine.  Can't wait to actually run it.  Piston was lightly scored when I got it.  Cyl. will clean easliy (1 carbon track)as will piston. 
Shep
Logged

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: New 562XP
« Reply #6 on: March 12, 2014, 10:21:04 pm »
Wilson, good to hear from you! How is your wife doing? Mine is new, bought it to figure out how the AT saws work.
Logged
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: New 562XP
« Reply #7 on: March 13, 2014, 08:15:29 am »
I see that the 556 IPL is gone from the Husky web-site....
Logged

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: New 562XP
« Reply #8 on: March 13, 2014, 10:09:49 am »
Quote from: SawTroll on March 13, 2014, 08:15:29 am
I see that the 556 IPL is gone from the Husky web-site....

I wonder if that is bad news or good? According to an old post from SawTroll the IPLs usually lag behind the market release of the saw! So perhaps the saw could have been canceled or has been changed significantly since original design requiring the IPL to be revised?

Just wondering ;D
Logged
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: New 562XP
« Reply #9 on: March 14, 2014, 04:07:36 am »
Quote from: KilliansRedLeo on March 13, 2014, 10:09:49 am
Quote from: SawTroll on March 13, 2014, 08:15:29 am
I see that the 556 IPL is gone from the Husky web-site....

I wonder if that is bad news or good? According to an old post from SawTroll the IPLs usually lag behind the market release of the saw! So perhaps the saw could have been canceled or has been changed significantly since original design requiring the IPL to be revised?

Just wondering ;D

I am too, but that model didn't really make sense in the first place, a large mount version of the 555 would just weight more, for no real gain (except an Orange clutch cover for 562xp owners).
Logged
Pages: [1] 2   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
48 Replies
5386 Views 		Last post January 26, 2013, 05:48:22 pm
by brokenbudget
10 Replies
662 Views 		Last post January 12, 2013, 06:22:17 pm
by don5477
7 Replies
392 Views 		Last post February 10, 2013, 03:40:09 am
by don5477
22 Replies
832 Views 		Last post March 09, 2013, 06:31:32 pm
by don5477
6 Replies
416 Views 		Last post July 28, 2013, 07:16:43 am
by riverrocket
228 Replies
7030 Views 		Last post January 03, 2019, 07:54:50 pm
by HolmenTree
6 Replies
317 Views 		Last post August 28, 2014, 10:49:11 pm
by Skippysphins
18 Replies
445 Views 		Last post November 24, 2015, 10:24:58 am
by SawTroll
1 Replies
183 Views 		Last post September 23, 2016, 05:27:42 pm
by Cut4fun .
8 Replies
301 Views 		Last post November 13, 2018, 11:41:46 am
by Cut4fun .