Author Topic: Husqvarna 572 565 590  (Read 9997 times)

0 Members and 0 Guests are viewing this topic.

Offline Chris J.

  • 4 cube
  • **
  • Posts: 45
  • Karma: 3
  • Chainsaw Hoarder & Tinkerer
  • Location: Inescapeable abyss, Texas
Re: New 70cc Husqvarna 572
« Reply #10 on: December 13, 2012, 10:43:38 am »
If they take the fresh air engine out of 372 and put in the active ignition they will have a good strong saw.
I hope they quit that X-torq/strato thing, it isn't doing anyone any good except cost a lot of money.
But it would still be a 372, just as it is now. Perhaps 373 would be a better more correct name then.

Mangus,  I haven't heard or read anything bad about the Husqvarna X-Torq/Stratos other than it takes them quite a few tanks to break in.
I'm a chainsaw hoarder & tinkerer.  The brand isn't usually important,  if the price is right I'll probably buy it.

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: New 70cc Husqvarna 572
« Reply #11 on: December 13, 2012, 04:04:23 pm »
If they take the fresh air engine out of 372 and put in the active ignition they will have a good strong saw.
I hope they quit that X-torq/strato thing, it isn't doing anyone any good except cost a lot of money.
But it would still be a 372, just as it is now. Perhaps 373 would be a better more correct name then.

Mangus,  I haven't heard or read anything bad about the Husqvarna X-Torq/Stratos other than it takes them quite a few tanks to break in.

It is more that it isn't a very effective way of saving the environment, as the emission and fuel consumption improvements aren't really substantial. At the moment it is good enough to satify the EPA though....

Personally I don't complain as long as it results in lighter and better performing saws - but that is far from always the case... ;)

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21870
  • Karma: 521
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: New 70cc Husqvarna 572
« Reply #12 on: January 06, 2013, 11:08:12 am »
You just got to luv this guy.   ;) :D ;D

Quote from: chinlee

inboard clutch ,,,check
auto tune,,,,,,,,,,check
silky smooth operation ,,,,,,check
power better than anything before it,,,,,,,,check

of coarse i can not confirm or deny any of these facts about the next generation of 70cc saw but,  i know something you dont know ,,doo dahhh ,,,dooo dahhh
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21870
  • Karma: 521
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: New 70cc Husqvarna 572
« Reply #13 on: January 06, 2013, 12:59:07 pm »

I know another guy with one in hand, buttttt you are not getting a peep out of him.  8)
REDNECK Saw Repair Getter Done

Offline Hedgerow

  • 5 cube
  • ***
  • Posts: 142
  • Karma: 27
Re: New 70cc Husqvarna 572
« Reply #14 on: November 12, 2013, 04:40:52 pm »

I know another guy with one in hand, buttttt you are not getting a peep out of him.  8)

I got a peep out of someone who tested one... It's on my "Just Buy it" list...
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21870
  • Karma: 521
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: New 70cc Husqvarna 572
« Reply #15 on: November 12, 2013, 04:48:31 pm »
I know of a couple other dealers that had them for testing.  3 that I knew of alone. Sounds like a winner....................... 
REDNECK Saw Repair Getter Done

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: New 70cc Husqvarna 572
« Reply #16 on: November 13, 2013, 01:05:57 am »
With 570 575 576 already used what are they going to call the 372 replacement with the 562 550 autotune class saw? I'm going to guess they are going with husqvarna 572xp.

They are out there in several different people hands being ran right now. So far all I have read  is good feedback just like the 550 and 562.  Stronger then a XPW one said.

Be interesting to see a 572xp if it feels as good in the hands as the 550 does and see if the weight is kept down too.

Nothing new there, but as far as I know the new 70cc saw will have an inboard clutch, unlike the 560/562, which likely takes something away regarding handling. I have no idea about the cc or power rating.

Offline komatsuvarna

  • 3 cube
  • *
  • Posts: 14
  • Karma: 1
Re: New 70cc Husqvarna 572
« Reply #17 on: November 13, 2013, 08:11:12 am »
I think I maybe sorta kinda might remember trying a saw with no stickers or nameplate out awhile back......maybe  ;D.  Cant remember for sure.

Offline Adirondackstihl

  • 6 cube
  • ****
  • Posts: 176
  • Karma: 8
  • Location: Champlain, NY
Re: New 70cc Husqvarna 572
« Reply #18 on: November 13, 2013, 09:26:03 am »
I got a peek at one earlier this year  ;)

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 68
  • Information collector
  • Location: Troms, North Norway
Re: New 70cc Husqvarna 572
« Reply #19 on: November 13, 2013, 08:07:01 pm »
I think I maybe sorta kinda might remember trying a saw with no stickers or nameplate out awhile back......maybe  ;D.  Cant remember for sure.
Odd stuff, those memory losses!  ;D

 

Related Topics

  Subject / Started by Replies Last post
0 Replies
357 Views
Last post November 26, 2016, 02:35:22 pm
by weimedog
3 Replies
527 Views
Last post February 24, 2019, 01:52:26 pm
by Cut4fun .
0 Replies
123 Views
Last post October 29, 2017, 09:09:27 pm
by weimedog
0 Replies
110 Views
Last post February 26, 2019, 08:33:02 am
by Cut4fun .
0 Replies
107 Views
Last post February 27, 2019, 07:37:48 am
by Cut4fun
1 Replies
101 Views
Last post April 30, 2019, 12:57:07 pm
by Cut4fun .
3 Replies
125 Views
Last post August 13, 2019, 06:45:16 pm
by trail twister
0 Replies
31 Views
Last post May 20, 2020, 08:37:52 am
by Cut4fun .
2 Replies
35 Views
Last post June 04, 2020, 09:42:24 am
by Cut4fun .
0 Replies
14 Views
Last post June 09, 2020, 08:21:59 am
by Cut4fun