Author Topic: Video OE 346 - 365 SP  (Read 739 times)

0 Members and 0 Guests are viewing this topic.

Offline David Young

  • 5 cube
  • ***
  • Posts: 133
  • Karma: 16
Re: Video OE 346 - 365 SP
« Reply #10 on: April 20, 2013, 10:53:09 pm »
Why no chain brake handle on the 346 in the video?

Later
Dan
Glad to see the little 346 OE is still OK.
The 346 NE that I sent you is my personal fire wood saw with bone stock factory carb with the primer bulb still working. My son wont use that 346 for cutting firewood, he says its to darn slow. He was fine with it until I built the Partner 5000.

Later
Dan

Wow then I would like to see that 5000!

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2757
  • Karma: 172
Re: Video OE 346 - 365 SP
« Reply #11 on: April 21, 2013, 06:58:55 am »


Back when COLD start racing sometimes you could grab the brake handle instead of top handle or hit brake handle and engage the freaking brake in the cut.



 ;D Well as a matter of fact I too know someone who did that also .As a matter of fact the same guy is typing on my keyboard at this very second .

Offline dozerdan

  • 4 cube
  • **
  • Posts: 25
  • Karma: 3
Re: Video OE 346 - 365 SP
« Reply #12 on: April 25, 2013, 09:22:02 am »
Why no chain brake handle on the 346 in the video?

Later
Dan
Glad to see the little 346 OE is still OK.
The 346 NE that I sent you is my personal fire wood saw with bone stock factory carb with the primer bulb still working. My son wont use that 346 for cutting firewood, he says its to darn slow. He was fine with it until I built the Partner 5000.

Later
Dan

Wow then I would like to see that 5000!

If you ever get to central Pa, stop in and run it, you can play with it it as much as you like.

Later
Dan
Danny Henry
dozerdan@sunlink.net
570 658 6232

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22121
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Video OE 346 - 365 SP
« Reply #13 on: April 26, 2013, 01:48:13 pm »
That woods ported work saw, partner 5000 plus I had with tiny oem carb has  the most torque in the cut so far for me in 0-50cc.

  It was fun to run in the wood pile helping others with firewood. Guys called it a NASCAR saw.
REDNECK Saw Repair Getter Done

Offline dozerdan

  • 4 cube
  • **
  • Posts: 25
  • Karma: 3
Re: Video OE 346 - 365 SP
« Reply #14 on: May 07, 2013, 06:03:08 am »
That woods ported work saw, partner 5000 plus I had with tiny oem carb has  the most torque in the cut so far for me in 0-50cc.

  It was fun to run in the wood pile helping others with firewood. Guys called it a NASCAR saw.

I am running a Walbro hda from a Stihl 039 on the 5000. I did manage to get all of the covers and the air filter back in place but i was testing my patience.

Later
Dan
Danny Henry
dozerdan@sunlink.net
570 658 6232

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 149
  • Location: Hayesville, NC
Re: Video OE 346 - 365 SP
« Reply #15 on: May 07, 2013, 07:32:13 am »
Quote
I am running a Walbro hda from a Stihl 039 on the 5000. I did manage to get all of the covers and the air filter back in place but i was testing my patience.

Later
Dan
What HDA carb did you use?  My IPL's only show HD carbs for 039.
Shep

Offline David Young

  • 5 cube
  • ***
  • Posts: 133
  • Karma: 16
Re: Video OE 346 - 365 SP
« Reply #16 on: May 07, 2013, 03:16:42 pm »
Why no chain brake handle on the 346 in the video?

Later
Dan
Glad to see the little 346 OE is still OK.
The 346 NE that I sent you is my personal fire wood saw with bone stock factory carb with the primer bulb still working. My son wont use that 346 for cutting firewood, he says its to darn slow. He was fine with it until I built the Partner 5000.

Later
Dan

Wow then I would like to see that 5000!

If you ever get to central Pa, stop in and run it, you can play with it it as much as you like.

Later
Dan

I pmd you on AS to ask where you were from, my girls parents live in linden/ williamsport. we are headed there in june.  I have a 346 that you built but then was worked on by  big Dave,  runs good but could possibly run better, its got some super high numbers.

Regards

David

Offline dozerdan

  • 4 cube
  • **
  • Posts: 25
  • Karma: 3
Re: Video OE 346 - 365 SP
« Reply #17 on: May 08, 2013, 10:36:17 am »
Quote
I am running a Walbro hda from a Stihl 039 on the 5000. I did manage to get all of the covers and the air filter back in place but i was testing my patience.

Later
Dan
What HDA carb did you use?  My IPL's only show HD carbs for 039.
Shep

That was my mistake. I must have  HDA on my mind. I used a Walbro HD 5 on the 5000.

Later
Dan
Danny Henry
dozerdan@sunlink.net
570 658 6232

Offline dozerdan

  • 4 cube
  • **
  • Posts: 25
  • Karma: 3
Re: Video OE 346 - 365 SP
« Reply #18 on: May 08, 2013, 10:55:27 am »
Why no chain brake handle on the 346 in the video?

Later
Dan
Glad to see the little 346 OE is still OK.
The 346 NE that I sent you is my personal fire wood saw with bone stock factory carb with the primer bulb still working. My son wont use that 346 for cutting firewood, he says its to darn slow. He was fine with it until I built the Partner 5000.

Later
Dan

Wow then I would like to see that 5000!

If you ever get to central Pa, stop in and run it, you can play with it it as much as you like.

Later
Dan

I pmd you on AS to ask where you were from, my girls parents live in linden/ williamsport. we are headed there in june.  I have a 346 that you built but then was worked on by  big Dave,  runs good but could possibly run better, its got some super high numbers.

Regards

David

I looked in my PMs and I found nothing, send me another one.

Later
Dan
Danny Henry
dozerdan@sunlink.net
570 658 6232

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22121
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Video OE 346 - 365 SP
« Reply #19 on: May 20, 2013, 04:13:07 pm »
Had to grab some pics today of some saws. So just sharing here too.






REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
8 Replies
234 Views
Last post March 09, 2013, 10:10:30 pm
by stihlbro
1 Replies
226 Views
Last post May 15, 2013, 10:05:45 am
by 660magnum
1 Replies
182 Views
Last post February 23, 2014, 02:25:04 pm
by jmester
0 Replies
111 Views
Last post July 19, 2015, 07:48:55 pm
by 660magnum
5 Replies
491 Views
Last post November 16, 2015, 08:30:21 am
by weimedog
36 Replies
290 Views
Last post October 02, 2015, 06:46:52 am
by Moparmyway
4 Replies
233 Views
Last post November 13, 2015, 08:28:53 am
by SDB777
2 Replies
134 Views
Last post September 07, 2016, 05:27:00 pm
by Revpop
0 Replies
158 Views
Last post October 23, 2016, 03:14:17 pm
by Cut4fun .
3 Replies
141 Views
Last post September 25, 2017, 08:10:47 am
by pete