Author Topic: 338 oiler  (Read 684 times)

0 Members and 0 Guests are viewing this topic.

Offline gunrac

  • 4 cube
  • **
  • Posts: 55
  • Karma: 5
  • Location: Marion Ohio
338 oiler
« on: March 07, 2014, 09:43:21 pm »
Kevin is probably in bed......so will c who is up.....

Share on Facebook Share on Twitter


Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: oiler
« Reply #1 on: March 07, 2014, 09:48:34 pm »
Which Husqvarna saw are we talking about?
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline gunrac

  • 4 cube
  • **
  • Posts: 55
  • Karma: 5
  • Location: Marion Ohio
Re: oiler
« Reply #2 on: March 07, 2014, 09:50:43 pm »
will look more into it tomorrow.........

Offline gunrac

  • 4 cube
  • **
  • Posts: 55
  • Karma: 5
  • Location: Marion Ohio
Re: oiler
« Reply #3 on: March 07, 2014, 10:01:27 pm »
had a couple extra beers after my day.........338...first i run this saw.....oiler adjustment screw was just setting on top w/ adjuster still attached .......looked like a piece was broken off at the bottom of the threads......like i say......will check out in am.......clearer head......lol

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22129
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: oiler
« Reply #4 on: March 07, 2014, 11:22:51 pm »
Is this the back up 338 you was getting ready?   The one I had wasnt broken.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22129
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: oiler
« Reply #5 on: March 07, 2014, 11:24:01 pm »
Kevin is probably in bed......so will c who is up.....

Naw I stay up late and sleep in weekends.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22129
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 338 oiler
« Reply #6 on: March 08, 2014, 07:58:52 am »
husqvarna 338 west coast edition IPL. Just so you can see the oiler parts.  http://www.husqvarna.com/ddoc/HUSI/HUSI2005_AAaa/HUSI2005_AAaa__1150068-01.pdf
REDNECK Saw Repair Getter Done

Offline gunrac

  • 4 cube
  • **
  • Posts: 55
  • Karma: 5
  • Location: Marion Ohio
Re: 338 oiler
« Reply #7 on: March 08, 2014, 09:32:18 am »
Is this the back up 338 you was getting ready?   The one I had wasnt broken.

Yes.......this is the back-up.....Will these pieces need to be separated before assembling? Seems like I can grab a couple threads.....but didn't want to force it....also, need to know the reasoning for the chips......thinking someone may have forced it some way.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22129
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 338 oiler
« Reply #8 on: March 08, 2014, 09:38:01 am »
That should be just the dentents for oiler adjustment. Looks like it just come unscrewed to far.  Like when you back out you feel 3 notches so to speak.

I dont know if you can get it started and tightened down without removing the motor or not. See the area for a socket or wrench, just guessing. Never had to go deep in a 338 yet.  I'd sure try just doing it with a screwdriver first though.

Manual says just screw in tighten down.



husqvarna 338 service manual  http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CCgQFjAA&url=http%3A%2F%2Fwww.mymowerparts.com%2Fpdf%2FHusqvarna-Service-Repair-Manuals%2FW0301005.pdf&ei=kCwbU42JDe3iyAGMpIDwAg&usg=AFQjCNGTg-xWDSiPW-Rzuj9ZvKsnyNwQYQ&sig2=TB5-QoZOm4FNXplXWvt0hg&bvm=bv.62578216,d.aWc
REDNECK Saw Repair Getter Done

Offline gunrac

  • 4 cube
  • **
  • Posts: 55
  • Karma: 5
  • Location: Marion Ohio
Re: 338 oiler
« Reply #9 on: March 08, 2014, 10:37:00 am »
That should be just the dentents for oiler adjustment. Looks like it just come unscrewed to far.  Like when you back out you feel 3 notches so to speak.

I dont know if you can get it started and tightened down without removing the motor or not. See the area for a socket or wrench, just guessing. Never had to go deep in a 338 yet.  I'd sure try just doing it with a screwdriver first though.

Manual says just screw in tighten down.



husqvarna 338 service manual  http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CCgQFjAA&url=http%3A%2F%2Fwww.mymowerparts.com%2Fpdf%2FHusqvarna-Service-Repair-Manuals%2FW0301005.pdf&ei=kCwbU42JDe3iyAGMpIDwAg&usg=AFQjCNGTg-xWDSiPW-Rzuj9ZvKsnyNwQYQ&sig2=TB5-QoZOm4FNXplXWvt0hg&bvm=bv.62578216,d.aWc
......

Yes I felt the notch's......not so sure if I can just get away w/screwdriver only tho.

 

Related Topics

  Subject / Started by Replies Last post
PP 655 Oiler

Started by blsnelling « 1 2 » Poulan

10 Replies
347 Views
Last post October 18, 2013, 11:20:35 pm
by blsnelling
166 oiler

Started by chadstone « 1 2 3 » Dolmar Makita

21 Replies
742 Views
Last post August 05, 2014, 07:38:22 pm
by Cut4fun
5 Replies
173 Views
Last post December 08, 2013, 05:47:14 pm
by Fish
2 Replies
167 Views
Last post January 10, 2014, 09:45:18 am
by Fish
5 Replies
534 Views
Last post January 19, 2017, 09:55:19 pm
by farmboy
70E oiler

Started by ub54 Jonsered

8 Replies
689 Views
Last post March 01, 2017, 06:54:56 pm
by ub54
0 Replies
202 Views
Last post October 24, 2017, 10:47:26 pm
by rlamppa1
3 Replies
333 Views
Last post February 03, 2018, 09:31:43 pm
by Cut4fun .
5 Replies
266 Views
Last post July 05, 2018, 10:42:25 am
by Cut4fun .
5 Replies
144 Views
Last post July 13, 2020, 07:26:21 pm
by mowertech