Author Topic: Small 40cc saw with metal dawg husqvarna 435 ?  (Read 313 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Small 40cc saw with metal dawg husqvarna 435 ?
« on: January 08, 2014, 02:32:46 pm »
Talking with a ole friend of mine last night about chainsaws. Turns out he to has a echo 3900 he uses for trimming duties and a husky 455 for his bigger firewood duties.

He was telling me he has been happy with the 3900 except for one thing. ( I never noticed this on the 2 I had).  The little 3 PLASTIC  dawg on them. He said I want a small light saw around same 39cc with a metal dawg in a husky.

I recommended a 435.   Only thing I cant remember if the 435 I think 660mag brought over for me to tune and test had a metal dawg.  Any help on this and do you think I gave a wise replacement info to the friend?
REDNECK Saw Repair Getter Done

Share on Facebook Share on Twitter


Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: Small 40cc saw with metal dawg husqvarna 435 ?
« Reply #1 on: January 08, 2014, 04:57:35 pm »
If it is truly a 435 or a 435E the metal inner dog is  part number 544 28 65-01 $5.13 and the outer
does not appear to be available. If there ever was one!
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Small 40cc saw with metal dawg husqvarna 435 ?
« Reply #2 on: January 08, 2014, 05:29:35 pm »
Don't forget the screws to hold the dawg on?

That 435 had NK chain/bar.

Had to tune it a couple more times for his fuel mix was different and then had to tune it again when the weather got cold but no problem, I have the magic screw (splined) driver I got from HL Supply..

It is a strato. Runs good in the wood. Can not imagine what EPA was thinking with the splined screws? I suppose he could take it to the Husqvarna dealer and get it back two months later after they adjust the high needle? Certainly cannot get it adjusted at the big box store where his son bought it.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: Small 40cc saw with metal dawg husqvarna 435 ?
« Reply #3 on: January 08, 2014, 05:34:32 pm »
+1 on the screws, did you notice that Husky used to tell you the screw size and length in the IPL? Not any more, I suppose that is to try to keep us from buying them from McMaster Carr LOL, not working in my case.
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Small 40cc saw with metal dawg husqvarna 435 ?
« Reply #4 on: January 08, 2014, 06:25:56 pm »
I was just asking about dawg, because I cant remember. Did the 435 come with metal inner dawg new?  That was 1 of the 3 things that was a must have on the new saw.
Just has to have the inner one.
REDNECK Saw Repair Getter Done

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: Small 40cc saw with metal dawg husqvarna 435 ?
« Reply #5 on: January 08, 2014, 06:33:06 pm »
According to HVA it did.
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Small 40cc saw with metal dawg husqvarna 435 ?
« Reply #6 on: January 08, 2014, 06:34:43 pm »
They have a steel spike

We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Small 40cc saw with metal dawg husqvarna 435 ?
« Reply #7 on: January 08, 2014, 07:07:59 pm »
Good deal.

 He is suppose to bring in the old chain for the 3900, so I can make him one up.
  I got a good laugh from the storys of trying to buy a chain for it at the HD, Lowes, etc and then him using the same size file on the full 3/8 and 325 chains to sharpen with.
I been trying to straighten him out before he retires in 6 months.
REDNECK Saw Repair Getter Done

Offline David Young

  • 5 cube
  • ***
  • Posts: 133
  • Karma: 16
Re: Small 40cc saw with metal dawg husqvarna 435 ?
« Reply #8 on: January 10, 2014, 08:53:40 am »
kev what are you making for him?

do you have the ps3 you are spinning up? they dont even carry ps3 locally

David

Offline RoyM

  • Gas Hotsaw
  • ******
  • Posts: 502
  • Karma: 45
  • Location: Surrey British Columbia
Re: Small 40cc saw with metal dawg husqvarna 435 ?
« Reply #9 on: January 10, 2014, 10:01:02 am »
What does he want the spike for? Is it to make him look like a real logger or to use as a fulcrum when the chain dulls?
Old age and treachery always overcome youth and enthusiasm

 

Related Topics

  Subject / Started by Replies Last post
0 Replies
418 Views
Last post January 05, 2012, 07:24:56 pm
by Cut4fun .
10 Replies
1091 Views
Last post August 22, 2012, 06:55:02 pm
by Al Smith
9 Replies
281 Views
Last post May 12, 2014, 01:11:19 pm
by brokenbudget
0 Replies
203 Views
Last post October 11, 2014, 11:06:11 pm
by jvd850
18 Replies
503 Views
Last post December 17, 2014, 10:47:07 am
by srcarr52
3 Replies
344 Views
Last post August 21, 2015, 12:53:25 pm
by Cut4fun .
14 Replies
262 Views
Last post March 29, 2015, 01:51:20 pm
by Cut4fun .
19 Replies
642 Views
Last post December 29, 2015, 01:03:50 pm
by 3000 FPS
1 Replies
142 Views
Last post September 18, 2017, 08:38:44 pm
by 3000 FPS
1 Replies
113 Views
Last post February 03, 2018, 07:42:16 am
by Cut4fun .