Author Topic: Tested 3 372 today  (Read 1417 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4044
  • Karma: 159
  • OHIO REDNECK
Re: Tested 3 372 today
« Reply #20 on: September 04, 2011, 11:46:11 am »
I like .020 on 70cc up. I have had no trouble running .015 on 50cc.

I was checking the 50mm one over as bolted up and run without gasket and just liquid gasket material used it was coming out to .030. Thought it was a little tighter when bolted up without anything metal to metal.
Have you ever measured after bolting up to see if the 1194 or red or black rtv added anything to your squish? Dont seem like I should have lost a smidgen of squish.

I was thinking .020 this time and you confirmed that. Thanks.

Now I have to make up my mind if I want to drop it even more to run a oem gasket like the 026 was I just put back together. Then raise everything back.
REDNECK Saw Repair

Offline Old Iron Logging

  • Nitro Hotsaw
  • *******
  • Posts: 1132
  • Karma: 81
Re: Tested 3 372 today
« Reply #21 on: September 04, 2011, 02:52:52 pm »
Never checked the squish with 1194. When they get to that point, they are not coming apart again.

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Re: Tested 3 372 today
« Reply #22 on: September 04, 2011, 09:15:40 pm »
I like .020 on 70cc up. I have had no trouble running .015 on 50cc.

I was checking the 50mm one over as bolted up and run without gasket and just liquid gasket material used it was coming out to .030. Thought it was a little tighter when bolted up without anything metal to metal.
Have you ever measured after bolting up to see if the 1194 or red or black rtv added anything to your squish? Dont seem like I should have lost a smidgen of squish.

I was thinking .020 this time and you confirmed that. Thanks.

Now I have to make up my mind if I want to drop it even more to run a oem gasket like the 026 was I just put back together. Then raise everything back.
Are you going to machine the base down with a lathe or do it the red neck way? The 365 cylinder i got off you I'm saving for Dan, but the cylinder thats on it now I'm gonna play with. With the base gasket out now i have about .040 squish :o
Ron

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Tested 3 372 today
« Reply #23 on: September 05, 2011, 06:39:26 am »
There is a machinist that does the base and pop ups for $40. Least the last one in that woods ported 5000 was  ;)
I'm going redneck and just stock pistons. I never want to be in a position to have to depend on someone else for machine work again.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Tested 3 372 today
« Reply #24 on: September 05, 2011, 01:16:35 pm »
JFYI, Mark aka woodheater (north of me in Sandusky) showed me how to use my drill press to make pop up pistons and cut cylinders with it when he was here once.
Thats how he had done the 346 he had in the 3ci build.  I had thought his saw was the most impressive doing all the work himself with the tools he had on hand.
REDNECK Saw Repair Getter Done

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Re: Tested 3 372 today
« Reply #25 on: September 05, 2011, 01:33:14 pm »
Interesting. Any pics?
Ron

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4044
  • Karma: 159
  • OHIO REDNECK
Re: Tested 3 372 today
« Reply #26 on: September 05, 2011, 02:06:51 pm »
Yeah I got all the pics saved on a HD in a puter that the MO board fried on. So I have the pics, just cant get to them and I have went to laptops instead of full size PC's. So I dont see me putting MO boards in the 2 dead PC's.
He did a great job and the guy really thinks out of the box with the stuff he has shown me.
REDNECK Saw Repair

Offline John Mc

  • 5 cube
  • ***
  • Posts: 125
  • Karma: 12
  • Vermont
  • Location: Vermont
Re: Tested 3 372 today
« Reply #27 on: September 05, 2011, 09:15:26 pm »
You can buy an adapter cable that will plug into an old internal HD and let you run it as an external. If it's just a temporarly thing, you can get by without a case.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Tested 3 372 today
« Reply #28 on: September 06, 2011, 12:54:27 pm »
You can buy an adapter cable that will plug into an old internal HD and let you run it as an external. If it's just a temporarly thing, you can get by without a case.

PM me more info on this with a link please and pretend you are explaining this to a 5 year old OK. I'm not so smart with puters or it's language terms. 
REDNECK Saw Repair Getter Done

Offline John Mc

  • 5 cube
  • ***
  • Posts: 125
  • Karma: 12
  • Vermont
  • Location: Vermont
Re: Tested 3 372 today
« Reply #29 on: September 06, 2011, 10:40:59 pm »
I sent you some info on the cable. Let me know if you need more info, or if something isn't clear.

 

Related Topics

  Subject / Started by Replies Last post
23 Replies
2525 Views
Last post June 29, 2020, 01:13:18 pm
by dpjones
2 Replies
264 Views
Last post January 12, 2014, 01:55:06 pm
by Old Iron Logging
12 Replies
650 Views
Last post December 15, 2013, 04:37:33 pm
by doreadeal
28 Replies
1316 Views
Last post August 23, 2014, 07:49:58 pm
by mdavlee .
8 Replies
185 Views
Last post April 13, 2015, 05:01:55 pm
by Fishnuts2
4 Replies
203 Views
Last post May 25, 2015, 03:12:51 pm
by 660magnum
Ran some 044's today

Started by aclarke « 1 2 » Stihl

17 Replies
272 Views
Last post October 07, 2015, 09:26:44 pm
by aclarke
7 Replies
531 Views
Last post May 16, 2016, 05:19:54 am
by Eccentric
10 Replies
279 Views
Last post October 10, 2016, 06:47:42 pm
by 660magnum
12 Replies
276 Views
Last post August 30, 2017, 02:17:24 pm
by 3000 FPS