Author Topic: Some carb kits for some saws  (Read 279 times)

0 Members and 0 Guests are viewing this topic.

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2056
  • Karma: 157
  • Location: MD
Some carb kits for some saws
« on: March 09, 2014, 06:25:26 pm »
RB-45 zama kit for your 55
K20-WAT walbro kit for your 55
K22-HDA walbro kit for your 254,257,262
RK-23HS tillotson kit for your 272/288/2100
K10-HD walbro kit for your 365/371/372
RB-60 zama kit for your 365 with zama C3M-EL2/8
K10-RWJ walbro kit for your 372XT
RB-163 zama kit for your 357/359 with C3-EL42
K24-HDA walbro kit for your 357/359 with HDA-199 carb
RK-32HS tillotson kit for your 385/390/395
K15-WJ walbro kit for your 385/390/395
K10-WJ walbro kit for your 394
K12-WG walbro kit for your 3120
RB-122 zama kit for your 340/345/346/350/353


FEAR NO TREE. FEAR GOD.

Share on Facebook Share on Twitter


Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4109
  • Karma: 166
  • OHIO REDNECK
Re: Some carb kits for some saws
« Reply #1 on: March 09, 2014, 08:39:59 pm »
Nice.

Years ago I had a site marked that had every maker with carbs used and carb kits.  Havent found it since losing it 4 or so years ago.
REDNECK Saw Repair

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2056
  • Karma: 157
  • Location: MD
Re: Some carb kits for some saws
« Reply #2 on: March 09, 2014, 09:01:47 pm »
Thanks I am trying to find the most popular saws for j red and poulan as well. If you have any the come to mind and can list the carbs they have I will do the leg work on what kits are to be used.
P.S. Got those dvd- r disc for copying
FEAR NO TREE. FEAR GOD.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Some carb kits for some saws
« Reply #3 on: March 10, 2014, 03:39:37 am »
What kit is used on the 335/338/339XPT saws?  I don't have one of those saws here to check the carb on now...

K20-WAT is also used on the 36/41/136/141 Poulan built Husqvarnas.
RK-23HS is used on the 1100CD/2100CD/298XP/2101XP, 181SE/281XP/288XP, and 162SE/61/266/268/268XP/272XP saws.

On the Poulan front....

RK-88HL and DG-5HL are used on the old upright cylinder Poulans with Tillotson HL carbs.
RK-23HS is used on the 360/361/400/401/450/451, 200/300 series (306/245/etc), and 4200-8500 CounterVibe saws.
K10-HDB is used on the Walbro HDB's in 3400-4000 saws.  Some PP375/385/395 have a Zama instead.  Can't remember the # right now.  IIRC it's a C3 variant..
K10-WAT is used on the XXV and Micro series tophandles with Walbro carbs.
RK-14HU is used on the Tillotson HU carbs on the XX/20 saws and the XXV series saws with Tillotson HU carbs.
K20-WAT is used on the Walbro carbs in the non-stratto WildThing type saws and 2500-3050/PP255-305 series saws.
K22-HDA is used on the 3450/3750 and PP330/380 saws.  These saws have HDA164 and HDA137 carbs.
The 2800-3300, 3500, 3600, and PP365 saws (and maybe a model or two I'm forgetting) used the HDA49 carb.  Not sure if they use the same kits as the HDA164 and HDA137.


That's all I can remember for now...
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2056
  • Karma: 157
  • Location: MD
Re: Some carb kits for some saws
« Reply #4 on: March 11, 2014, 05:37:46 am »
I will try and find out what carbs are on those saws and get the kits listed. Glad you remembered about the top handle saws. And thanks for the poulan stuff.
FEAR NO TREE. FEAR GOD.

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2056
  • Karma: 157
  • Location: MD
Re: Some carb kits for some saws
« Reply #5 on: March 13, 2014, 06:10:20 pm »
RB-108 Zama kit fits your 334/335/338 with a C1Q-EL19 with remote primer
RB-109 Zama kit fits your 335/339 with a C1Q-EL20 with primer on the carb
RB-137 Zama kit fits your 338 with C1Q-EL33
K20-WAT Walbro kit fits your 335/338
FEAR NO TREE. FEAR GOD.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Some carb kits for some saws
« Reply #6 on: March 13, 2014, 06:54:12 pm »
Thanks for the the info.8)
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2056
  • Karma: 157
  • Location: MD
Re: Some carb kits for some saws
« Reply #7 on: March 13, 2014, 08:25:51 pm »
I took your  post on poulan carbs and posted in the poulan thread and put your name at the bottom hope you don't mind. Thought more would see it there.
FEAR NO TREE. FEAR GOD.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Some carb kits for some saws
« Reply #8 on: March 15, 2014, 05:32:13 pm »
Fine by me.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

 

Related Topics

  Subject / Started by Replies Last post
10 Replies
1018 Views
Last post October 09, 2011, 04:08:05 pm
by Al H
2 Replies
302 Views
Last post May 03, 2013, 06:59:36 am
by Spike60
31 Replies
796 Views
Last post November 17, 2013, 05:05:45 pm
by oldtimber
11 Replies
459 Views
Last post December 30, 2018, 08:12:28 pm
by Cut4fun .
35 Replies
1130 Views
Last post November 11, 2016, 11:28:35 pm
by pete
1 Replies
125 Views
Last post March 13, 2014, 08:30:38 pm
by 3000 FPS
10 Replies
192 Views
Last post April 30, 2014, 06:24:16 pm
by sharkey
7 Replies
339 Views
Last post August 21, 2015, 12:39:29 pm
by leec
6 Replies
258 Views
Last post December 01, 2015, 07:05:32 pm
by Fish
4 Replies
316 Views
Last post February 11, 2020, 09:15:53 am
by Cut4fun .