Author Topic: X torq carb screws  (Read 214 times)

0 Members and 0 Guests are viewing this topic.

Online jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2066
  • Karma: 158
  • Location: MD
X torq carb screws
« on: February 28, 2016, 04:04:55 pm »
I know this is covered here some where what are you guys using the get passed the sleeves to adjust the screws. Is there a way to eliminate them all together?
FEAR NO TREE. FEAR GOD.

Share on Facebook Share on Twitter


Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: X torq carb screws
« Reply #1 on: February 28, 2016, 04:14:51 pm »
The sleeve is spring loaded and you just push it back out of the way.

You can take the screw out and remove the sleeve

There is a special screw driver with a sleeve on the screw driver that pushes the carb sleeve out of the way.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Online jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2066
  • Karma: 158
  • Location: MD
Re: X torq carb screws
« Reply #2 on: February 28, 2016, 04:52:08 pm »
Would you happen to know what the part number is for the special screwdriver? Thanks
FEAR NO TREE. FEAR GOD.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: X torq carb screws
« Reply #3 on: February 28, 2016, 05:18:45 pm »
It is the splined one
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: X torq carb screws
« Reply #4 on: February 28, 2016, 05:21:52 pm »
On the end of the sleeve is a little tab you can grind off and then there is no limiter.

This is easier said than done for the sleeve is small and you put it in a vice and the sleeve will flatten. May be you could hold it with a pair of small needle nose?
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Online jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2066
  • Karma: 158
  • Location: MD
Re: X torq carb screws
« Reply #5 on: February 28, 2016, 07:24:12 pm »
I have a couple of different splined screwdrivers I will give them a try.
FEAR NO TREE. FEAR GOD.

Online jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2066
  • Karma: 158
  • Location: MD
Re: X torq carb screws
« Reply #6 on: February 28, 2016, 07:27:51 pm »
Had the screwdriver in stock. Didn't even think about it being splined on the outside of the screw till you said it was splined. Thank you
FEAR NO TREE. FEAR GOD.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: X torq carb screws
« Reply #7 on: February 28, 2016, 07:32:00 pm »
+1
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

 

Related Topics

  Subject / Started by Replies Last post
9 Replies
928 Views
Last post December 09, 2011, 06:36:47 pm
by Al Smith
0 Replies
624 Views
Last post July 22, 2012, 07:34:54 pm
by 660magnum
2 Replies
580 Views
Last post July 23, 2012, 07:49:15 am
by 660magnum
6 Replies
273 Views
Last post October 14, 2013, 06:29:37 pm
by Cut4fun .
2 Replies
106 Views
Last post August 17, 2013, 01:19:00 pm
by Cut4fun .
1 Replies
130 Views
Last post February 06, 2014, 08:52:17 pm
by KilliansRedLeo
6 Replies
216 Views
Last post August 27, 2014, 10:07:06 am
by weimedog
stihl carb screws

Started by pigpen60 « 1 2 » Stihl

14 Replies
266 Views
Last post October 13, 2014, 10:14:51 pm
by 660magnum
9 Replies
418 Views
Last post August 11, 2015, 12:34:48 pm
by dannyupsolate
3 Replies
354 Views
Last post May 20, 2016, 04:45:49 pm
by Revpop