Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => McCulloch => Topic started by: robbor on July 04, 2012, 12:52:35 am
-
Just did a carb kit on a 10-10 i got that ran but bogged terrible when i try to cut or rev up. After the carb kit it ran the same. Figured its probably H mixture, was 1.5 turns out so adjusted it to 1 turn out and it runs alot better but not quite right and now its idling real fast and i did not touch anything but H. Whats the proper way to adjust?
-
Click on whatever model of carb it is .http://wem.walbro.com/distributors/servicemanuals/