Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Stihl => Topic started by: dolmarfan on November 15, 2012, 10:39:34 am
-
My father stihl 023 starts idle but when you rev it dies.Help!
-
Open up the low speed jet a tad bit .If that doesn't get it rebuild the carb .More than likely the later .
-
Thanks!
-
So today I took off the muffler look at the piston -ok.
I made 3 or 4 cuts and whe you rev it dies.
Took off the cap at the gas made a lot off mess but the chainsaw works just fine!Could be the vent at the tank?
One more qusstion could someone tale me the codes of the parts for rebuilding the carb?
-
One more qusstion could someone tale me the codes of the parts for rebuilding the carb?
Carb numbers or carb kits?
-
For rebuiliding the carb carb kits ! :)
-
Looking at IPL several different carbs offered on 021 023 025 saws. Which carb do you have?
Do you have the 021 023 025 IPL ?
-
This is why we need your carb numbers... RB-50 the kit is used on Stihl 021, 023, and 025 saws with a C1Q-S11G carburetor.
-
Thanks!Now i am not at home but tomorow i wiil check .Thanks again :)
-
Sent you the IPL with different carbs listed on it.
-
Thanks again! :D