Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Poulan => Topic started by: Cut4fun . on December 10, 2012, 04:57:55 pm

Title: Poulan Bars OEM
Post by: Cut4fun . on December 10, 2012, 04:57:55 pm
I'm getting ready to put a order together to purchase new poulan oem bars.

For the 330 16" 60DL  3/8  50 gauge same as Oregon powermatch. These  $25.00. I have one of these I got years ago.  ;)

No 18".

20" 70DL 3/8 50 gauge, Oregon Intenz bar for $20.00 each.

OEM bar in a non-intenz with "Poulan", Poulan Pro", or "BadBoy" for $25.00 each.

22" OEM bars with "Poulan Pro", "BadBoy", or solid black for $22.00.

All of these bars are new. These prices do not include shipping to me or you.

I am not selling I am just passing on info what they will cost you to order.   We could save on shipping maybe if ordered all at once, then again maybe not.




Title: Re: Poulan Bars OEM
Post by: fastleo151 on December 11, 2012, 12:19:28 am
These are all non laminated correct? Any pictures?  I will be in for multiples of each, let me know the details of who to pay and by when?

Thanks, Andy
Title: Re: Poulan Bars OEM
Post by: 660magnum on December 11, 2012, 12:29:34 am
The Power Match is not laminated. It has a replaceable tip.

The Intenze is a laminated externally adjustable bar with the adjustment in the bar itself.
Title: Re: Poulan Bars OEM
Post by: 3000 FPS on December 11, 2012, 12:58:13 am
I would be interested in one of the 16" 60DL  3/8  50 gauge same as Oregon powermatch.
Roger
Title: Re: Poulan Bars OEM
Post by: 3000 FPS on December 11, 2012, 01:14:30 am
Hey Fastleo151 nice to see you here.
Title: Re: Poulan Bars OEM
Post by: fastleo151 on December 11, 2012, 05:28:18 am
Good to be here! I been lurking for a while, just have not pulled the trigger until yesterday.

Andy
Title: Re: Poulan Bars OEM
Post by: Cut4fun . on December 11, 2012, 06:42:51 am
I have one of the 16" on a saw right now. Let me check and see if it is laminated or not.  I know it has the replaceable tip and reminds me of the powermatch.

 But I also know powermatch is a solid bar and I have never seen a newer K041 mount that wasnt laminated.

I'm going to say the 20" and 22" are the oem laminated bars without the replaceable tips just like when bought new.

There is a member here that sales the bars. He hasnt posted his store in the online section yet, but he sent me the price list on bars yesterday. I've bought from him before many times in years past.
Title: Re: Poulan Bars OEM
Post by: Cut4fun . on December 11, 2012, 06:48:19 am
These are all non laminated correct? Any pictures?  I will be in for multiples of each, let me know the details of who to pay and by when?

Thanks, Andy

Pics, not by me I am buying them from the seller a dealer and member here that will be listing them.  I'm just giving you all a heads up.

Your poulan oem bars are laminated right, I bet all of these are too. I need to check on the 16" being I still have one.

Guys keep saying there is no 16" bars and I have been telling them yes there is. I bought them in the past and the same guy still has the poulan oem 16 3/8 050 60dl bars I bought years ago. 
Title: Re: Poulan Bars OEM
Post by: 3000 FPS on December 11, 2012, 10:58:38 am
It does not matter to me if the 16" bars are laminated or not. 
Title: Re: Poulan Bars OEM
Post by: Cut4fun . on December 11, 2012, 01:24:15 pm
It does not matter to me if the 16" bars are laminated or not. 

I posted the sellers info so you can take care of your order. 

He is going to put stuff in the online area I hope so the rest of you can order their poulan stuff and take care of it themselves.
Title: Re: Poulan Bars OEM
Post by: Cut4fun . on December 11, 2012, 01:27:43 pm
oldpart just listed the price list and bars in the online buying area. Please do all your ordering questions etc  with him and his thread down in the online store area.

Thanks guys and glad to give you the heads up on the bars.
Title: Re: Poulan Bars OEM
Post by: Cut4fun . on December 11, 2012, 04:57:19 pm
I just got a big surprise. The 16" K041 mount bars appear solid just like the Oregon powermatch bars. Say made in Canada probably at the Oregon plant I would bet.

This bar was modded on one side only to run on husky K095 mounts too.  I do the same with my husky bars to run on the poulan K041 mount.

(http://i59.photobucket.com/albums/g289/doemaster789/66Impala/16poulanbark041001.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/66Impala/16poulanbark041002.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/66Impala/16poulanbark041003.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/66Impala/16poulanbark041004.jpg)
Title: Re: Poulan Bars OEM
Post by: Cut4fun . on December 11, 2012, 05:12:57 pm
Here it is in the online board. All up to you now.  http://chainsawrepair.createaforum.com/used-chainsaw-parts-online/poulanpoulan-pro-bars-oem-oregon/msg13713/#new

Some of the prices look a little lower on certain bars.   8)
Title: Re: Poulan Bars OEM
Post by: Cut4fun . on January 14, 2018, 12:41:36 pm
Trying to figure out the drive link count on a 18" K041 3/8 050 bar I bought.  Only bought it because even the nashville guy never even had them for sale in the link above.  So must be harder to find.

It is solid like the 16" and 20"  with replaceable tip too.

952 044 565  952044565
Title: Re: Poulan Bars OEM
Post by: Cut4fun . on January 14, 2018, 12:42:39 pm
shows 66dl   on the poulan pro 380

Poulan 952044565

Bar Length- 18", Nose- SNR, Pitch- 3/8", Gauge- .050"


Shows there was a 28" 90dl bar too.  New one to me.




pic with info

Title: Re: Poulan Bars OEM
Post by: Cut4fun . on January 15, 2018, 12:52:38 pm
Saving better pic with numbers etc.

Title: Re: Poulan Bars OEM
Post by: Cut4fun . on January 18, 2018, 06:36:48 pm
shows 66dl   on the poulan pro 380

Poulan 952044565

Bar Length- 18", Nose- SNR, Pitch- 3/8", Gauge- .050"


Arrived.  Good shape ready to use.
Title: Re: Poulan Bars OEM
Post by: Cut4fun . on January 30, 2018, 05:45:00 pm
Stumbled across some 20" poulan bars in K041 and D009 with replaceable sprocket tips.

Only buying top 2



Title: Re: Poulan Bars OEM
Post by: chainsawlady on February 01, 2018, 05:17:03 pm
Trying to figure out the drive link count on a 18" K041 3/8 050 bar I bought.  Only bought it because even the nashville guy never even had them for sale in the link above.  So must be harder to find.

It is solid like the 16" and 20"  with replaceable tip too.

952 044 565  952044565

I have 15 new Windsor, Oregon, Sandvik bars for Poulan saws. Will send list with prices.
chainsaw lady
Title: Re: Poulan Bars OEM
Post by: Cut4fun . on February 11, 2018, 01:13:52 pm
YELLOW poulan pro label in 22" 530044698
GREEN poulan label is 22" 530044672
same bars



Title: Re: Poulan Bars OEM
Post by: Cut4fun . on September 25, 2020, 06:38:11 pm
Thinking of pulling some of my poulan K041 3/8 bar tips to convert over to more .325 tips.  Was just comparing.
One with oregon on it is a D009

2.5 wide mount area to 2 back. Just those older poulan 3/8 325 bars used narrow 9t and 10t. My later one used the 11t in 3/8 just like new Oregon.  Just found the narrow 3/8 9t nose on a old new Oregon I got just like those 3/8 older poulan bars

Info at start before finding above = Poulan bar that is 325 050 with replaceable tip 38019 .  It is  a solid Oregon powermatch bar relabeled but has a narrow tip.   Can that tip be replaced with the wider tip oregon 34775 .325 12T .
oregon s 35323 is a 325 10T too.   

Title: Re: Poulan Bars OEM
Post by: Cut4fun . on December 28, 2020, 09:45:27 am
Bought a couple 3/8 16" K095 bars from a local to convert over to 325 K041 for the poulans in 16"

Title: Re: Poulan Bars OEM
Post by: Cut4fun on February 08, 2022, 09:13:53 am
Trying to figure out these 20" bars.  952-044314 952044314

Cant figure out if 325 etc. Guessing 050 buy bar numbers

3/8 tip so probably 70DL 050



Title: Re: Poulan Bars OEM
Post by: ray benson on February 08, 2022, 10:18:57 am
 3/8" - 20" bar 952-044314  listed  in a PP385/395 ipl
Title: Re: Poulan Bars OEM
Post by: Cut4fun on February 08, 2022, 02:56:23 pm
3/8" - 20" bar 952-044314  listed  in a PP385/395 ipl


I was hoping it was a different mount.  Thanks for info and link 
Title: Re: Poulan Bars OEM
Post by: Cut4fun . on March 12, 2022, 09:27:17 am
Poulan 28" K041 bar  chart info with pic of NOS 28"





Title: Re: Poulan Bars OEM
Post by: ray benson on March 12, 2022, 10:14:30 am
 Those   24" and 28" are pretty rare. You have a stash of them?
Title: Re: Poulan Bars OEM
Post by: Cut4fun . on March 13, 2022, 07:38:56 am
Those   24" and 28" are pretty rare. You have a stash of them?

No the 28" is a guy on the CRG FB.  I sold all of my 24" as I have no use for either in that mount.

I dont use the OEM 18" ones either so they can go too. 
Title: Re: Poulan Bars OEM
Post by: 3000 FPS on April 05, 2022, 09:30:02 pm
I have converted some of those bars to 3/8 from .325 but never the other way around.
Title: Re: Poulan Bars OEM
Post by: Cut4fun . on December 12, 2022, 02:22:58 pm
Only picked these up for the poulan bar with replaceable tip.  16” 3/8 050 and guessing D176 bar mount for saws like 3400 etc.
looks like guy tried to drill to use on a newer poulan.

Title: Re: Poulan Bars OEM
Post by: 3000 FPS on December 12, 2022, 09:36:01 pm
That extra hole will not hurt a thing.