Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Stihl => Topic started by: wenron on December 25, 2012, 05:16:36 pm
-
I have a stihl 031 that was given to me ran 3 tanks threw it , ran good now I try to start it it floods out, put new plug in no differance, does anybody know what the voltage should be at the plug I get about 4.5 volts with a volt meter.
-
I have only worked on 2 031. So I dont know the answer to your question.
Stihl 031 032 service manual all 94 pages is going to be sent in PM. Happy reading.
-
Most of the Stihl 031 problems have been with the condenser in the ignition.
See if you have spark?
-
Rebuilding a 031 Stihl from parts
-
Here a video off the first test
I lowered the cylinder the port timing is now much better it pulled 180 Psi :o
http://youtu.be/SlhykFZ_vEM
-
The crankcase is from a 032 and the cylinder is mount cold on the case