Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Dolmar Makita => Topic started by: Ducksnuff870 on April 14, 2013, 02:28:36 pm
-
I somehow broke a spocket on my 7300. Best place to get a new 1? Its a 7 tooth. I generally run a 24" bar but I have a 36" i've never used yet. Should i think about a different sprocket. 8 tooth? Im not a saw expert lol
-
If you are talking about a 8 tooth rim that goes on the clutch, you can get one from the Stihl dealer over in Ashland. (M&M) They will have a 7 tooth too.
They are on the north edge of town close to where Cleveland Ave (old downtown highway 42 runs into the newer 42 outer belt. It is just beyond where 250 crosses Cleveland ave. In a remodeled bank barn just off the road. It is out by the water plant.
They are good about stocking stuff like that or any part for a Stihl.
The large rim on the Dolmar is the same as a rim sprocket on a Stihl 660 or 460.
The small hub Stihl rims are odd ball and not like other brands.
-
Anything more than a 28" bar over does the oiler on the 6400, 7300, 7900, or 84cc BB Dolmars. You can run a 30 fine if you are in green wood but there's just not enough oil for anything else. If you are cutting blow downs or old tree tops, you best stay with 28" max.
-
I've been to M&M. Its 25 mins from home. Should i stay with 7 tooth rim? If i did happen to use 36" bar i would cut my bar oil with synthetic motor oil and maybe have some1 on the other side of my cut with oil can. I watched a guy run a 36" on a 7900 last spring and we had no troubles.
-
I have a couple 7900's that I normally run 24" on. I run 7 tooth rims on them.
I have some husky and Stihl cookie cutters that I use a 8 tooth on.
I have a .325 Dolmar saw that runs a 8 tooth rim.
-
Call M&M 1st to make sure they have what you want in stock.
-
thanks for the info. .325 is that 3/8" micro or picco or whatever. Mine is 3/8 50 gauge. Will the rim on my 036 fit my dolmar? Or is it too small?
-
I'm 20mins south of shelby and in the barn tearing a 505 apart.
If you need a standard 7 3/8 today. Run down here and I'll hook you up with one.
-
If you want to order your own and save the gas and time running around. http://northwoodsaw.com/store/index.php?l=product_list&c=48
The one you are wanting http://northwoodsaw.com/store/index.php?l=product_detail&p=310
-
Well shoot. I didnt see your reply till jus now. I live in shelby.
-
I dont have to have it today but thanks for offering. If you do repair work I may bring ya a saw next time I break 1.
-
There's a Dolmar Dealer on the East side of Bucyrus
Corner of King and Kess Rds near the county jail
DETTERMAN'S SALES & SERVICE
3812 KING RD.
BUCYRUS
OH 44820
Phone (419) 562-5888
Fax (419) 562-8838
Central Power the Dolmar distributor is located in Columbus. If you need a part and call him in the morning, it usually comes the next day to his shop. You will probably have to pay shipping? Echo is the same way.
If you enter these coordinates in Google or Google maps it will show you where it is at. 40.82705, -82.92988
-
Dolmar dealer in Shiloh also. 2 mins from where i cut on dads farm. The dealer belongs to a member of a landraping/unresponsible farming church group. I dont give my money to them unless I absolutely have to.
-
I went there and the only guy around was barefooted in his early 20's. He didn't know??? the answer about the part I needed.
-
Barefoot lol.I talked to him on the phone he had a BB demo saw. he said he would sell it to me for $650. Their is another dolmar dealer on the outskirts of willard/celeryville. I wont go to him either. I'm not fond of his pleasant attitude (sarcasm). A guy from Shiloh had a dealership not farm from willard in a lil burg called centerton.He closed up shop.I'll check out the one in Bucyrsus.