Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Poulan => Topic started by: mattinky on May 01, 2013, 09:25:16 pm

Title: What model Poulan do I have?
Post by: mattinky on May 01, 2013, 09:25:16 pm

I've got a saw that is in the 2700 family, bore is 45mm, is it a 2700? I can't remember the bore sizes

Title: Re: What model Poulan do I have?
Post by: 3000 FPS on May 02, 2013, 11:27:11 am

I tried to find some information on the 2700 and could only find that it is a 44cc saw.   I could not find the bore size and I do not own or have worked on one.    Maybe someone else has or will know.

Title: Re: What model Poulan do I have?
Post by: Cut4fun . on May 02, 2013, 01:22:49 pm

45mm bore x 32mm stroke would be 50.9cc  3.1ci   

You have a plastic clamshell crankcase or metal crankcase?

Title: Re: What model Poulan do I have?
Post by: Cut4fun . on May 02, 2013, 01:25:51 pm

poulan 3050 shows 50cc   http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/d999f94e46b5903788256d620017155e?OpenDocument

poulan 3100 shows 49cc  http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/fe04103afdf553fd88256d62001c402b?OpenDocument

I'm wondering if the 50cc is a mistake on 3050 and 3050 3100 3000 305 are all the same 49cc.  ???

Title: Re: What model Poulan do I have?
Post by: 3000 FPS on May 02, 2013, 01:39:12 pm

I know that the 2700 is a mag crankcase and not a clamshell.

Title: Re: What model Poulan do I have?
Post by: Cut4fun . on May 02, 2013, 01:42:17 pm

Never seen a 2700 here. 

I'm wondering about the bore if correct measurement.

Is it a bare bore or chrome?

Title: Re: What model Poulan do I have?
Post by: brokenbudget on May 02, 2013, 05:27:49 pm

2 variations of the 2700. the first model 2700 is exactly like a 2800, 305 etc. then they went and started putting the '2700' designation on the 295/4620 style chassis.

Title: Re: What model Poulan do I have?
Post by: mattinky on May 02, 2013, 05:50:53 pm

It looks like the 3100 that cut4fun posted (thank you), I've got a 2700 that looks just like the 3100 but I've never measured the bore because I'm lazy haha..  I thought someone might know what the bore sizes were on that family of saws. I was going to part this saw out but I'm not sure exactly what model it is.

Title: Re: What model Poulan do I have?
Post by: Cut4fun . on May 02, 2013, 07:14:16 pm

49mm bore x 32mm stroke 60cc 3750 380 365 3500.

46.5mm bore x 32mm stroke 54cc 330 3300 3450.

44mm bore x 32mm 49cc 3000 305.


Just a WAG here   
 42.5mm bore x 32mm stroke  45.4cc
 43mm bore 46.4cc   ( Any saws fitting these 2 bores) ?