Chainsaw Repair

How To Basics - Carb Fixes + Mods - IPL and Service Manuals => IPL and Service Manuals => Topic started by: farmboy on June 10, 2013, 09:57:52 pm

Title: Need Workshop Manual for Husky 42
Post by: farmboy on June 10, 2013, 09:57:52 pm

My link to gardening-tools-direct.co.uk doesn't work anymore.  Need WS manual for Husky 42.  Got the case split bearings in case.  Probably should have heated the case flywheel side so the bearing would have come out on crank.  Don't know how to get the flywheel side out.
Shep

Title: Re: Need Workshop Manual for Husky 42
Post by: 660magnum on June 10, 2013, 10:12:53 pm

Look in your Email . . .  I sent you one there???

Title: Re: Need Workshop Manual for Husky 42
Post by: 660magnum on June 10, 2013, 10:15:16 pm

If the bearing is in a blind pocket, you can heat the case up to about 300F in the oven and bang the parting line of the case half against a board and it will shake out.

Title: Re: Need Workshop Manual for Husky 42
Post by: farmboy on June 11, 2013, 09:17:33 am

Quote from: 660magnum on June 10, 2013, 10:12:53 pm

Look in your Email . . .  I sent you one there???

Thanks

Quote from: 660magnum on June 10, 2013, 10:15:16 pm

If the bearing is in a blind pocket, you can heat the case up to about 300F in the oven and bang the parting line of the case half against a board and it will shake out.
It is in a blind pocket.  This is exactly what I needed to know.  Thank you very much.
Shep

Title: Re: Need Workshop Manual for Husky 42
Post by: SawTroll on July 04, 2013, 04:52:45 pm

The manual is a too large file, so I can't attach it - sorry.  :(