Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Efco Olympyk Oleo-Mac => Topic started by: Old Iron Logging on September 15, 2013, 07:41:40 am

Title: Oleo-Mac run at fundraiser
Post by: Old Iron Logging on September 15, 2013, 07:41:40 am

The old saw that came from the Yukon.

https://www.youtube.com/watch?v=78PKXY7nCFo

Title: Re: Oleo-Mac run at fundraiser
Post by: Cut4fun on September 15, 2013, 12:34:59 pm

Amazes me how  tight some guys can keep their change overs. I never could.

Title: Re: Oleo-Mac run at fundraiser
Post by: Old Iron Logging on September 15, 2013, 02:42:13 pm

Quote from: Cut4fun on September 15, 2013, 12:34:59 pm

Amazes me how  tight some guys can keep their change overs. I never could.

You have to remember I had a chainsaw in my hands everyday for over 20 years, bil for over 30( check his run with the 562 in the Husky section). I am loosing my feel for a saw and felling problem trees after just 2 years behind a counter.

Title: Re: Oleo-Mac run at fundraiser
Post by: Cut4fun . on September 15, 2013, 03:04:30 pm

Trust me I noticed it on the 562 run.  I just didnt say anything then.

Title: Re: Oleo-Mac run at fundraiser
Post by: Old Iron Logging on September 15, 2013, 03:19:32 pm

Thats why I need quicker saws than bil. I'm behind big time on handling one.

Title: Re: Oleo-Mac run at fundraiser
Post by: EHP on September 15, 2013, 10:33:33 pm

I'm thinking that saw came from Jerod to John in their big saw deal they did , I built 4 or 5 of those 980's

Title: Re: Oleo-Mac run at fundraiser
Post by: Old Iron Logging on September 16, 2013, 05:24:18 pm

Do they have as much potential as a 181 Husky?

Title: Re: Oleo-Mac run at fundraiser
Post by: EHP on September 16, 2013, 08:06:08 pm

NO, not even close

Title: Re: Oleo-Mac run at fundraiser
Post by: Al Smith on September 21, 2013, 03:39:57 pm

 ;D When I first saw "Yukon " I thought Gyp's old 999 had resurfaced .

Title: Re: Oleo-Mac run at fundraiser
Post by: Old Iron Logging on September 21, 2013, 08:36:26 pm

This was one of John's saws but not the 999. Here is todays run. Saw has gasket pulled, muffler mod and 9 tooth gear.
https://www.youtube.com/watch?v=DeaW6ZIT-BY