Chainsaw Repair
For Sale - Wanted - Trades - Swaps - Stolen - Recalls - Lost => Wanted => Topic started by: Eccentric on September 17, 2013, 05:33:38 am
-
Stuff I need for the 288XP I'm building to replace the saw I'm giving to RandyMac:
-An undamaged Husky 281/288XP flywheel.
-A complete Husky 281/288XP clutch cover I have the chainbrake band, knee link setup, spring, and CB guts cover. Would need the flag/handle and the rest of the CB parts ('flat' spring, pivot screw/bushings, etc).
-The four starter cover screws for a 281/288XP.
-One of the two long carburetor/intake manifold/AF adaptor screws for a 281/288 with the HD air filter. I have one of those screws already.
-A good usable 32-34" 3/8" pitch sprocket nose bar for a large frame Husky (D009 type mount). My 'ideal' would be a Windsor/Sandvik/Carlton Speed Tip in this mount as I have a buncha replacement tips for those bars. I could instead use a .404-.063G Windsor/etc Speed Tip bar in this mount, as I have 3/8 pitch tips on hand and could swap it on that bar for my saw (and keep the .404 tip as a spare for some other bars I have). I'd consider other brands/types of bars so long as they're in good condition, the right length and mount,3/8" pitch, and not .058G (.063G is prefered, but .050G would be considered).
I need deez for my 2100CD:
-Crankcase gasket for a 2100CD/2101XP.
-Air filter cover for a Husky 1100CD/2100CD/298XP/2101XP. Doesn't have to be pretty. Just intact. Uncracked would be nice.
Stuff to trade for the stuff above:
-I have various older Homelite/McCulloch/Poulan (and some older Husky) parts and bars to trade.
-I have a bunch (as in dozens) of new 'three rivet' Windsor 3/8 pitch sprocket tips.
-I have a few new .404 'one rivet' Oregon sprocket tips to trade.
-I have a good used 30" (98DL) .058G older Oregon '3 rivet' sprocket nose large Husqvarna (H009) mount bar that I'd trade too. It's in good shape, but could use a rail dressing. Tip still has a LOT of life left in it.
-Got a good running Husqvarna 350 (2003 production 45mm/52cc version with the removable transfer covers and no purge bulb) with a 16" .325 pitch bar and narrow kerf chain that I might consider trading.
I can provide pics of all the trade bait. Got some folded presidential pictures (or electronic substitutes for 'em) to trade too.
-
Stuff I need for the 288XP I'm building to replace the saw I'm giving to RandyMac:
-An undamaged Husky 281/288XP flywheel.
-A complete Husky 281/288XP clutch cover I have the chainbrake band, knee link setup, spring, and CB guts cover. Would need the flag/handle and the rest of the CB parts ('flat' spring, pivot screw/bushings, etc).
-The four starter cover screws for a 281/288XP.
-One of the two long carburetor/intake manifold/AF adaptor screws for a 281/288 with the HD air filter. I have one of those screws already.
-A good usable 32-34" 3/8" pitch sprocket nose bar for a large frame Husky (D009 type mount). My 'ideal' would be a Windsor/Sandvik/Carlton Speed Tip in this mount as I have a buncha replacement tips for those bars. I could instead use a .404-.063G Windsor/etc Speed Tip bar in this mount, as I have 3/8 pitch tips on hand and could swap it on that bar for my saw (and keep the .404 tip as a spare for some other bars I have). I'd consider other brands/types of bars so long as they're in good condition, the right length and mount,3/8" pitch, and not .058G (.063G is prefered, but .050G would be considered).
I need deez for my 2100CD:
-Crankcase gasket for a 2100CD/2101XP.
-Air filter cover for a Husky 1100CD/2100CD/298XP/2101XP. Doesn't have to be pretty. Just intact. Uncracked would be nice.
Stuff to trade for the stuff above:
-I have various older Homelite/McCulloch/Poulan (and some older Husky) parts and bars to trade.
-I have a bunch (as in dozens) of new 'three rivet' Windsor 3/8 pitch sprocket tips.
-I have a few new .404 'one rivet' Oregon sprocket tips to trade.
-I have a good used 30" (98DL) .058G older Oregon '3 rivet' sprocket nose large Husqvarna (H009) mount bar that I'd trade too. It's in good shape, but could use a rail dressing. Tip still has a LOT of life left in it.
-Got a good running Husqvarna 350 (2003 production 45mm/52cc version with the removable transfer covers and no purge bulb) with a 16" .325 pitch bar and narrow kerf chain that I might consider trading.
I can provide pics of all the trade bait. Got some folded presidential pictures (or electronic substitutes for 'em) to trade too.
Update:
Obtained the 32" bar that I was needing. The Husky 350 has been sold. The 30" D009 mount bar went to RandyMac with his 288XP. Most of the 288XP parts have come my way.
-Still in need of a Husqvarna 1100CD/2100CD/298XP/2101XP Air Filter Cover. Don't mind if it's scratched and ugly. Minor cracks are liveable. Would like to get one without any missing sections or major cracks.
-Also need a 281/288XP 'plastic chainbrake' type clutch cover. Cover can be bare, as I have all the needed CB parts and such for it already. Just need one that's uncracked/unbroken. Ugly/scratched is fine.
-Jacob please let me know what you need from me for the used 36" .063G bar that I'd like to use on my 2100CD.
-
Update:
Obtained the 32" bar that I was needing. The Husky 350 has been sold. The 30" D009 mount bar went to RandyMac with his 288XP. Most of the 288XP parts have come my way.
-Still in need of a Husqvarna 1100CD/2100CD/298XP/2101XP Air Filter Cover. Don't mind if it's scratched and ugly. Minor cracks are liveable. Would like to get one without any missing sections or major cracks.
-Also need a 281/288XP 'plastic chainbrake' type clutch cover. Cover can be bare, as I have all the needed CB parts and such for it already. Just need one that's uncracked/unbroken. Ugly/scratched is fine.
-Jacob please let me know what you need from me for the used 36" .063G bar that I'd like to use on my 2100CD.
I've never seen a plastic 288 chain brake cover unless you are talking about the plastic flag style. If so I have one.
I also have a 2100 AF cover for you and a bunch of other 288 parts.
-
Update:
Obtained the 32" bar that I was needing. The Husky 350 has been sold. The 30" D009 mount bar went to RandyMac with his 288XP. Most of the 288XP parts have come my way.
-Still in need of a Husqvarna 1100CD/2100CD/298XP/2101XP Air Filter Cover. Don't mind if it's scratched and ugly. Minor cracks are liveable. Would like to get one without any missing sections or major cracks.
-Also need a 281/288XP 'plastic chainbrake' type clutch cover. Cover can be bare, as I have all the needed CB parts and such for it already. Just need one that's uncracked/unbroken. Ugly/scratched is fine.
-Jacob please let me know what you need from me for the used 36" .063G bar that I'd like to use on my 2100CD.
I've never seen a plastic 288 chain brake cover unless you are talking about the plastic flag style. If so I have one.
I also have a 2100 AF cover for you and a bunch of other 288 parts.
Yep. Not a plastic clutch cover. A clutch cover with the plastic chainbrake lever/flag (as opposed to the 'wire' CB lever type). Sorry I didn't call you last week. Was very busy with family. Will call this weekend.