Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Husqvarna => Topic started by: KilliansRedLeo on October 01, 2013, 12:34:40 pm

Title: Flushcut here is your 242XP
Post by: KilliansRedLeo on October 01, 2013, 12:34:40 pm
Here is your saw
Title: Re: Flushcut here is your 242XP
Post by: Cut4fun on October 01, 2013, 08:03:35 pm
I know folks that might be interested in a husqvarna 238 242 so PM any info.
Title: Re: Flushcut here is your 242XP
Post by: KilliansRedLeo on October 01, 2013, 08:26:05 pm
I know folks that might be interested in a husqvarna 238 242 so PM any info.

Sorry, I built this saw specifically for Rajan. I do have one nice case/crank left as well as a clutch cover/brake complete that needs a new brake handle if someone is interested, $85 plus ship or $100 for both.
Title: Re: Flushcut here is your 242XP
Post by: Cut4fun on October 01, 2013, 08:29:17 pm
Show pics so I can pass info on.
Title: Re: Flushcut here is your 242XP
Post by: KilliansRedLeo on October 01, 2013, 08:59:36 pm
Show pics so I can pass info on.

No problem, I will post a few pics in the AM. I also have a few (3) 261s that have been converted to 262XP. Completely rebuilt from the big end bearings up.
Title: Re: Flushcut here is your 242XP
Post by: flushcut on October 01, 2013, 10:13:55 pm
Very nice TJ I'll get a check in the mail tomorrow. I can't wait! The 372's are both strong runners, tho ugly, but I don't need no stinking trailer queens.