Chainsaw Repair
For Sale - Wanted - Trades - Swaps - Stolen - Recalls - Lost => Locked Sale and Wanted threads => Topic started by: Eccentric on October 19, 2013, 01:58:25 pm
-
I need a good usable 32" (105DL) 3/8 pitch sprocket nose bar for my Husky 288XP. Large Husqvarna or 12.1mm Stihl mount (I have one of Homelite410's Husky/Stihl adapters to use if needed). .050G or .063G is fine. No .058G please.
If your bar is a Windsor/Sandvik/Carlton/etc that takes the Windsor 'three rivet tips' and is .404-.063G, then I can use that............as I have 3/8 pitch tips for those bars.
Alternatively, I could use a .404-.063G Oregon/Husqvarna/Cannon bar that takes the Oregon 'one rivet' tips as I have one of those 3/8 tips that I could swap on.
Stuff I have to trade:
-Various old Homelite, McCulloch, Poulan parts and bars.
-Some Husqvarna parts.
-A bunch (dozens) of new 'three rivet' Windsor 3/8 pitch sprocket tips.
-A few new .404 pitch Oregon 'one rivet' tips.
-A nice Husqvarna branded Oregon 20" small Husky mount 3/8-.050G RSN bar that takes the Oregon 'single rivet' tips.
-A new German made Carlton small Husky mount .325-.058G RSN bar that takes the Oregon 'single rivet' tips.
Also have some folded presidential pictures (and electronic versions) to trade.
-
Picked up a bar from a friend at our GTG last weekend. 8)