Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Husqvarna => Topic started by: Marty on October 23, 2013, 09:21:41 pm

Title: husky 3120xp trigger disassemble
Post by: Marty on October 23, 2013, 09:21:41 pm

I need to reconnect the throttle cable to the trigger but can't get the handle apart. it looks like the whole saw needs to be split in half. Any guidance on this would be greatly appreciated.

Title: Re: husky 3120xp trigger disassemble
Post by: Cut4fun . on October 23, 2013, 09:28:11 pm

I never had a 3120 trigger section apart. 

Husqvarna 3120 IPL  http://www.interforstromania.ro/uploads/pdf/Desfasurator_de_piese_motoferastrau_Husqvarna_3120_XP-50392.pdf

Title: Re: husky 3120xp trigger disassemble
Post by: 660magnum on October 23, 2013, 09:34:31 pm

I did a 372 trigger/operator presence lever and it wasn't easy until I eventually figured it out. But it is also something you will forget a few months later.

The key on the 372 was the trigger pivot pin.

If you are just wanting to thread the trigger cable, it can be done on the 372 without taking any thing apart

Title: Re: husky 3120xp trigger disassemble
Post by: Cut4fun . on October 23, 2013, 09:52:39 pm

Husqvarna service manual   http://www.getsaws.com/PDFs/w9600001.pdf

124 pages with 3120xp listed. Maybe something in there to help with pics.

Title: Re: husky 3120xp trigger disassemble
Post by: Cut4fun . on October 23, 2013, 09:56:19 pm

IPL pic of tank and trigger

(http://chainsawrepair.createaforum.com/index.php?action=dlattach;topic=2429.0;attach=4139;image)

Title: Re: husky 3120xp trigger disassemble
Post by: Marty on October 24, 2013, 12:19:41 am

 Thanks for the service manual . looks like it has the info I need  Cheers