Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Dolmar Makita => Topic started by: bungalow on November 01, 2013, 12:44:20 pm
-
Hi all,
When I put my Dolmar PS6000i on the clutch side it idles more, wich could indicate an air leak at the seals. but would that be the clutch side- or flywheel side seal?
thx
-
the high side
-
OK, so the flywheel side I presume... I'm trying to figure the cause of that; is there less pressure on the seal in that position?
-
Doesn't really matter why. Figuring it out just for curiosity's sake is fine however.
Seals do weird things sometimes. If it's leaking on one side, I do both seals if at all possible. Both are the same age. Rubber parts have a finite life...
-
Doesn't really matter why. Figuring it out just for curiosity's sake is fine however.
Seals do weird things sometimes. If it's leaking on one side, I do both seals if at all possible. Both are the same age. Rubber parts have a finite life...
Absolutely! Do both seals cheap insurance.
Shep