Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Husqvarna => Topic started by: Dancan on April 24, 2011, 10:17:30 am
-
I know , it's a clearing saw not a chainsaw .
I've got an issue with mine that it keeps loosening the nut that holds the blade (replaced last year for the same issue) .
Any insight would be helpful .
-
I know nothing on this but someone should. Shows part 28 being a LOCKING nut. Are you using locking?
Husqvarna 265RX owners manual with parts list (http://www.gardening-tools-direct.co.uk/content/husqom153hoen2004_1140252-26bcuten.pdf)
-
Thanks for posting the link .
I have replaced the nut , flange and blade and thought the problem was solved , after a couple of gallons of fuel the issue is back .
I open to suggestions .
-
What blade are you running? Had one blade that never would stay tight on my 250. Tossed it and never had trouble since.
-
The original was from Husky , this one is from Stihl , I'll swap it with the one from my FS550 and try that (better stud/nut setup on the Stihl) .