Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Stihl => Topic started by: treeslayer2003 on December 27, 2013, 12:43:12 am

Title: 660 3/4 wrap screw
Post by: treeslayer2003 on December 27, 2013, 12:43:12 am
any body know the part number for the longer screw that goes in the lower right side of the handle bar on a 660 3/4 wrap?
Title: Re: 660 3/4 wrap screw
Post by: 660magnum on December 27, 2013, 05:27:16 am
9074 478 4675       Pan head self-tapping screw IS-P6x32.5
Title: Re: 660 3/4 wrap screw
Post by: treeslayer2003 on December 27, 2013, 08:36:51 am
thanks. do you know if that is longer than the standard half wrap screw?
Title: Re: 660 3/4 wrap screw
Post by: 660magnum on December 27, 2013, 08:46:28 am
The regular screw is Pan head self-tapping screw IS-P6x21.5

So there is a 11 mm difference
Title: Re: 660 3/4 wrap screw
Post by: treeslayer2003 on December 27, 2013, 08:58:55 am
that makes sense as the short screw won,t tighten up. my dealer didn't even know what a 3/4 wrap was lol. maybe he can order it with the number. thanks again.
Title: Re: 660 3/4 wrap screw
Post by: Cut4fun . on December 27, 2013, 09:27:53 am
http://www.ebay.com/itm/11T-STIHL-9074-478-4675-SCREW-Lot-of-2-/251401606083

http://northwoodsaw.com/store/index.php?l=product_detail&p=2049

Title: Re: 660 3/4 wrap screw
Post by: treeslayer2003 on December 28, 2013, 08:58:55 am
thanks Kevin, that's better than begging the local dealer to get it.