Chainsaw Repair

How To Basics - Carb Fixes + Mods - IPL and Service Manuals => How To Basics and Fixes => Topic started by: SDB777 on January 18, 2014, 08:20:11 pm

Title: What else do I "HAVE" to have?
Post by: SDB777 on January 18, 2014, 08:20:11 pm
http://www.baileysonline.com/Chainsaws/Repair-Tools/Wrenches/Complete-Set-of-Wiha-Chain-Saw-Tools.axd

Like the topic title...what else do I absolutely need?(other then parts)  Already have a compression gauge, air compression, and miscellaneous tools(sockets/screwdrivers/etc....).



Saws I have:
Stihl MS250
Stihl 064
J'red 2186
J'red 2094

I am trying to find a saw to 'practice on' before opening something I actually 'care about'.......





Scott (don't need fancy) B
Title: Re: What else do I "HAVE" to have?
Post by: 660magnum on January 18, 2014, 09:25:42 pm
WIHA stuff is the best
Title: Re: What else do I "HAVE" to have?
Post by: Cut4fun . on January 18, 2014, 10:59:54 pm
4 pages of tools. http://northwoodsaw.com/store/index.php?pg=1&l=product_list&c=59

 I have misc stuff from each page. Clamp set is one that is handy. 


More  http://northwoodsaw.com/store/index.php?l=product_list&c=169
Title: Re: What else do I "HAVE" to have?
Post by: jmester on January 19, 2014, 02:04:13 am
www.husqvarna.com/ddoc/HUSI/.../HUSI2000_AAaa_I0000081_.pdf
The link above should be a special tools manual for husqvarna  from year 2000-2008
Title: Re: What else do I "HAVE" to have?
Post by: jmester on January 19, 2014, 02:06:26 am
Sorry the above link does not work. I just google husqvarna service tool and the link for the PDF manual comes up.
Title: Re: What else do I "HAVE" to have?
Post by: SDB777 on January 19, 2014, 11:13:39 am
4 pages of tools. http://northwoodsaw.com/store/index.php?pg=1&l=product_list&c=59

 I have misc stuff from each page. Clamp set is one that is handy. 


More  http://northwoodsaw.com/store/index.php?l=product_list&c=169


Was there something special within those four pages of stuff that I would need, or are ya just trying to get me in trouble with the 'one-that-must-be-obeyed' ;D


WIHA stuff is the best


Good information, buy once and not have to worry.....thank you!




What is the 'sealer' everyone is using(gasket making)?
Also, is there a 'brand' of preference as far as gaskets are concerned??








Scott (can never get by with one question) B
Title: Re: What else do I "HAVE" to have?
Post by: Cut4fun on January 19, 2014, 11:51:26 am
ya just trying to get me in trouble with the 'one-that-must-be-obeyed' ;D

HUH?  ???

Title: Re: What else do I "HAVE" to have?
Post by: Cut4fun on January 19, 2014, 12:00:53 pm
I wont list compression gauge and tach figuring you know how to tune and check psi.   Some stuff can be bought at Harbor freight too, like long l Hemostats.

From those 4 pages I have most of this stuff.

http://northwoodsaw.com/store/index.php?l=product_detail&p=398

http://northwoodsaw.com/store/index.php?l=product_detail&p=1925

http://northwoodsaw.com/store/index.php?l=product_detail&p=1926

http://northwoodsaw.com/store/index.php?l=product_detail&p=1801

http://northwoodsaw.com/store/index.php?l=product_detail&p=1487    If needed. I have always found my leaks without this.

http://northwoodsaw.com/store/index.php?l=product_detail&p=1481    I still get by with drywall screw pulling most seals.

http://northwoodsaw.com/store/index.php?l=product_detail&p=717

http://northwoodsaw.com/store/index.php?l=product_detail&p=715

http://northwoodsaw.com/store/index.php?l=product_detail&p=716   stihl saws

http://northwoodsaw.com/store/index.php?l=product_detail&p=465  Threebond sealant. This is the updated 1184, I still use the older tube of 1194 when needed.

http://northwoodsaw.com/store/index.php?l=product_detail&p=1149

http://northwoodsaw.com/store/index.php?l=product_detail&p=1150



Title: Re: What else do I "HAVE" to have?
Post by: 3000 FPS on January 19, 2014, 01:11:54 pm
ya just trying to get me in trouble with the 'one-that-must-be-obeyed' ;D

HUH?  ???


spending to much money and getting in trouble with the wife.


Good torx set if you do not have one.   Good set of ball allens if you do not have.    I like the T-handles.     A Good set of 1/4" drive ratchet and sockets.   I use those all the time, it keeps me from breaking things by torqueing to hard.
Title: Re: What else do I "HAVE" to have?
Post by: SDB777 on January 19, 2014, 01:30:45 pm
ya just trying to get me in trouble with the 'one-that-must-be-obeyed' ;D

HUH?  ???


spending to much money and getting in trouble with the wife.


Good torx set if you do not have one.   Good set of ball allens if you do not have.    I like the T-handles.     A Good set of 1/4" drive ratchet and sockets.   I use those all the time, it keeps me from breaking things by torqueing to hard.




"The one-that-must-be-obeyed" knows all....she has this weird ability to know when a project that will cost more in tools is about to happen.  And no matter what happens, I will never hear the end of it.....if momma ain't happy, no one's happy!  Guess I'll need to find her a boyfriend or something..... ;)


Thanks for all those links, it'll give me something to do this afternoon. 
Not milling today, mother-in-law is here...got to be nice and 'stay inside'(what the crap kind of rule is that??). 

Just did the purchase on the link at the top of this post, had some milling funds from the other day(cut 9 Shortleaf Pine logs) into 3/4" thickness for a barn going up down the road!  I suspect the fella will be bringing the rest of the logs soon(he liked the milling I did).




Scott (I'm always in trouble for something) B
Title: Re: What else do I "HAVE" to have?
Post by: Cut4fun on January 19, 2014, 02:18:33 pm
LOL I get it now.  Never had that problem myself, thank goodness. 

SDB777 = Scott?   

Also you mill and sale slabs?  You can list your website (Links) etc in your sig here for free.
It's all about sharing info here,  where to buy parts, help others with knowledge etc.

Title: Re: What else do I "HAVE" to have?
Post by: SDB777 on January 19, 2014, 03:32:21 pm
LOL I get it now.  Never had that problem myself, thank goodness. 

SDB777 = Scott?   

Also you mill and sale slabs?  You can list your website (Links) etc in your sig here for free.
It's all about sharing info here,  where to buy parts, help others with knowledge etc.




Actually, she's quite 'forgiving' considering what she has got herself in to with me.


Yes, the SDB777 is what I have used all over the 'net for years....I'll pretty much answer to anything, but Scott works well too!


I have a small hobby sized LT-10 Wood-Mizer with the 10hp engine upgrade bandsaw mill in the backyard.  I use to do most of the milling with the Stihl 064 wearing the 36" ripping set-up, but I found the need to reduce the amount of time and 'waste' I was dealing with by using the chainsaw milling.  What use to take me 15 minutes with the chainsaw mill, I can do in about 2 minutes on the bandsaw(and the cut is so much better).

Most of the stuff I mill gets processed way down, and then sold as pen, bottle stopper, and small bowl blanks.  I typically do not sell many 'slabs or flitches' due to the size/shipping costs.  But I have been known to slab, mill timber for locals here on the cheap!  In fact, I sometime trade out milling labor costs for some of the timber(if it's something I can use/resell).  I really like the timber that most would walk past thinking it is too rotted or whatnot to bother with!  Spalting is my cha-ching!!!(although there is not that much profit, it pays for some 'toys')

I'll toss the link into the signature...thanks!  Always like to know it's okay to do it, before doing it!



Scott (I'll have a LOT of questions really soon) B
Title: Re: What else do I "HAVE" to have?
Post by: SDB777 on January 24, 2014, 07:53:05 pm
Shhhh.......the Big Brown Truck came just now, but the wife is sitting here.  So I can't open the box yet, it's killing me!




Scott (Bailey's is fast) B