Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Husqvarna => Topic started by: KilliansRedLeo on January 24, 2014, 10:05:48 am

Title: Need venturi sizes in three Walbro carburetors
Post by: KilliansRedLeo on January 24, 2014, 10:05:48 am
HDA-87
HDA-120
HDA-144

Trying to decide which to use and why on the 262XP conversion saw in the tutorial.
Title: Re: Need venturi sizes in three Walbro carburetors
Post by: 660magnum on January 24, 2014, 10:47:43 am
16.66
15.08
15.08
Title: Re: Need venturi sizes in three Walbro carburetors
Post by: KilliansRedLeo on January 24, 2014, 11:26:18 am
Thanks Jim, where did you find this info?
Title: Re: Need venturi sizes in three Walbro carburetors
Post by: SawTroll on January 24, 2014, 12:21:29 pm
Look here. (http://wem.walbro.com/walbro/family2.asp)
Title: Re: Need venturi sizes in three Walbro carburetors
Post by: KilliansRedLeo on January 24, 2014, 12:34:05 pm
 :thank you Niko!
Title: Re: Need venturi sizes in three Walbro carburetors
Post by: SawTroll on January 24, 2014, 12:40:46 pm
Your choise should be really easy - and it is a well known fact that the HDA-87 is preferable (it was only used on the earliest saws, so it isn't so easy to find).
Title: Re: Need venturi sizes in three Walbro carburetors
Post by: jockeydeuce on January 24, 2014, 12:42:49 pm
Is there a similar site for the Tillotson carbs???

Thanks for the link, Niko!
Title: Re: Need venturi sizes in three Walbro carburetors
Post by: SawTroll on January 24, 2014, 12:46:47 pm
Is there a similar site for the Tillotson carbs???

Thanks for the link, Niko!

Here (http://www.tillotson.ie/techinfo-service.php).
Title: Re: Need venturi sizes in three Walbro carburetors
Post by: 660magnum on January 24, 2014, 01:03:14 pm
There's one for Zama too

http://www.zamacarb.com/prod_lookup_results.cfm
Title: Re: Need venturi sizes in three Walbro carburetors
Post by: Cut4fun . on January 24, 2014, 01:18:49 pm
All 3 of those were in the How To section on the sticky boards. If not the same.  Let me know or put them with the right thread too. Thanks.

http://chainsawrepair.createaforum.com/ported-saws/