Chainsaw Repair
Dealers New Used OEM Aftermarket Chainsaw Parts online => Other dealers online => Topic started by: Cut4fun . on February 14, 2014, 03:30:43 pm
-
This is from Grande Dog, posted on another forum (maybe he needs an invite?):
Howdy All,
I hope this message finds everything well with you and yours.
Been having some crazy times out west since Bailey's showed us the door. Myself and a few other Bailey's expat's have gotten together and formed an LLC by the name of Left Coast Supplies. To kick things off we're having a "while supplies last" special on some GB bars. They're all made in Australia and the prices are set to move. The site is just coming on so I'm sure we'll have tons of growing pains in the near future. We'll be bringing more product on as soon as we can. You can catch us at www.leftcoastsupplies.com
Regards
Gregg
I see Gregg is here and Welcome to the site.
Gregg's info
Left Coast Supplies
1615B South Main Street
Willits CA 95490
888-995-7307 707-602-0141
www.leftcoastsupplies.com
gregg@leftcoastsupplies.com
Hmmmm 36" GB Pro Top to my door for what just the bar cost before shipping elsewhere. 8)
-
Yeah good deals on those bars.
-
Whats the difference in these 2 GB pro top bars?
Is 1 solid nose and not shown in pic maybe?
HV36-50PA http://leftcoastsupplies.com/product/36-gb-pro-top-bar-38-050-2/
SN36-50PA http://leftcoastsupplies.com/product/36-gb-pro-top-bar-38-050/
-
Should be the same
-
Very cool. Willits is only 88 miles away, and I drive through there sometimes. Now Gregg's gotta come to our next GTG.8)
-
Howdy,
Thanks for the heads up on the bars. Had a mix up on the Oregon equivalent numbers. The SN36 is actually a 12mm Stihl mount which is like the Oregon D025 mount.
Regards
Gregg
-
Welcome to CSR Grande Dog!
Philbert
-
Howdy,
Thanks for the heads up on the bars. Had a mix up on the Oregon equivalent numbers. The SN36 is actually a 12mm Stihl mount which is like the Oregon D025 mount.
Regards
Gregg
Thank You. 8)
(http://www.redneckmarketers.com/images/2_thumbs_up.png)
-
glad to see ya landed on yer feet greg. already bookmarked your site.
do yall take usps money orders?
semper fi bro.
-
Howdy,
Thanks for you support.
Post office money orders work for us.
Regards
Gregg
-
Just checking links to make sure not broken. Working for me.
-
Still works for me too.
-
It works for me now. I hate Puters.... they are having a great deal on GB large Mount husqvarna bars. $12.99 a PC. I bought 2 :-) I should have bought more.
-
What do u need for Husky 32" bar only.......to 43302?
Check out the price on the GB 32"
-
Somebody bought out almost all of the 24" and 28" bars. Bet we see them on ebay for more money soon...
-
Hmm I was looking for a decent set of loppers but I didn't see any .Chainsaws and hand saws I have a plenty,no good loppers .
-
ya all think they would fit echo saws? like 14 inch vxl i usually get 52 links.....would the 14 inch arbortec bar work still i would think it would.....guy just posted a echo cs 310 with one and it was sharp!!!!!never thought i would get excited on friday night over a chainsaw bar LMAO!!!!
-
ya all think they would fit echo saws? like 14 inch vxl i usually get 52 links.....would the 14 inch arbortec bar work still i would think it would.....guy just posted a echo cs 310 with one and it was sharp!!!!!never thought i would get excited on friday night over a chainsaw bar LMAO!!!!
That little Echo should take the A041 mount bars. Standard DL counts for 3/8-LP on the Echo will be 52DL for 14" and 56DL for 16".
-
so you would not be able to get the combo... you would have to get the bar and by the chain seperate since they dont offer it in 52 or 56 links would that be correct ....i emailed them to see if they did....
-
they are some sharp looking bars
-
so you would not be able to get the combo... you would have to get the bar and by the chain seperate since they dont offer it in 52 or 56 links would that be correct ....i emailed them to see if they did....
I'm sorry........................took me a bit to figure out what you were asking.
The 14" and 16" combos they have listed are for an A074 mount saw. That's the tiny Stihl mount, as used on their tophandles and pole saws.
For an Echo you'd need the A041 mount bar. I see they have a 12" combo in that mount...
http://leftcoastsupplies.com/product/12-gb-arbor-tech-barchain-combo-38lp-050-a041-mount/
http://leftcoastsupplies.com/gb-bar-chain-combo-specials/
-
all good im tight the last 2 months maybe in time they will get more in......yes im a obtuse sometimes sorry.....and thanks for taking the time to figure out what i meant....."cheers"
-
No worries. I'm a bit slow sometimes. I hear you on the 'tight' part. Left Coast had some bars that I wanted for CHEAP...........but I was holding off until some more $ comes in. Just saw that the bars I was going to grab have recently sold out........
-
The ones I wanted sold out too. Oh well not much use for the 36" bars now days anyways.
-
Howdy,
Regards
Gregg
Thought I had read folks were having troubles getting orders to go through your website. @Grande Dog
Just so folks know. Site worked flawlessly just now for me. Order placed.
-
Next day was packed and shipped. hoot hoot
Shipped/Billed On:
01/07/2015
Type:
Package
Weight:
10.00 lbs
-
Received my order today. Perfect transaction from order to delivery. Thanks @Grande Dog
-
(http://i59.photobucket.com/albums/g289/doemaster789/Projects/pp330cats%20018_zpsnp9hhy8z.jpg) (http://s59.photobucket.com/user/doemaster789/media/Projects/pp330cats%20018_zpsnp9hhy8z.jpg.html)
-
Howdy,
Thanks for you support.
Post office money orders work for us.
Regards
Gregg
Gregg what's the status of getting more GB bars?
-
@Grande Dog went to place another bar order and no GB bars listed anymore. Any info?
-
@Grande Dog went to place another bar order and no GB bars listed anymore. Any info?
I noticed it as well. All that's left is combos for a few sizes.
-
Howdy,
We've pretty much tapped them out of all the common bars that were made in AU that were intended for North American sales. They have some other lines besides the ProTops. I attached a sheet with links on it to items we have left. It's a little dated and people have been ordering. There's a great deal on reels of 72LGX while they last.
Regards
Gregg
-
Gregg check your site. = ERROR 403 - FORBIDDEN
-
Howdy,
Looks like we've surpassed our current server capability. We'll have it back as soon as possible.
Regards
Gregg
-
Howdy,
Well, we were on a shared server at our host. Our traffic kept bunching the servers undies, so we moved to a dedicated server. We're going to be working on the search function to make it more robust.
Regards
Gregg
-
You ought to see the list of stuff and cost the host here is buying for hosting us and others. :o
lcs is closed