Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Husqvarna => Topic started by: bigtuna on April 02, 2014, 01:39:15 pm
-
Hey fellas the throttle return spring on 357 with looks like zama carb is that spring replaceable who might sell one. its on there still just a little twisted. i bought it this way can't seem to see exactly how to keep tension on it.any help would be apprecited. thank you.
-
Is yours like this? See where the leg hooks in carb body.
I just grabbed this pic of net, so hope it works.
(http://thmb.inkfrog.com/thumbn/bounderdee/FRAME_-_HUSQVARNA_357_CARBURETOR_2.jpg=450&gap=1)
-
And go here:
http://www.partstree.com/parts/?lc=husqvarna&mn=357XP+%282011-05%29&dn=6585_0013
Look at the diagram and tell what part number is the spring you are referring to.
-
No it doesn't look exactly like that one. has a really shiny top. have not pulled the carb cause the saw runs just trying to get the throttle linkage hooked up. Thanks a bunch. On that diagram link looks like that spring is not avail. wow new carb shows to be $89.00 . ill study it some more. maybe i can figger it out.
-
I showed a walbro carb. I see you say Zama now?
Is yours a zama on a 357?
-
If this zama C3-EL42 around $40 new
Zama above IPL http://www.zamacarb.com/prod_lookup_results.cfm
http://www.zamacarb.com/pdfs/illustrations/c3.pdf
-
Cut for fun im not sure which one yet. got the spring fixed. will start w a 1/2 cap of mix down the carb throat. so ill pull the carb clean and prolly rebuild.