Chainsaw Repair
How To Basics - Carb Fixes + Mods - IPL and Service Manuals => How To Basics and Fixes => Topic started by: KilliansRedLeo on May 09, 2014, 09:49:39 am
-
Anyone come across a solvent for cured Yamabond or the like? Getting tired of playing with sharp objects, a razor blade.
-
I just removed a cylinder the other day that I used Threebond 1194 on and I just use finger nail for the excess and a razor scraper I use on all removals for clean up.
Never hardly anything on the mating surface to clean off. I just use carb cleaner on rag and wipe down mating area after that.
(http://cloudfront.zoro.com/product/large/13A710_AS01.JPG)
-
Try a super scraper.
http://www.amazon.com/Goodson-SS-4U-Super-Scraper/dp/B0009RMAHA
(http://ecx.images-amazon.com/images/I/21SQA2VV8PL.jpg)
-
3Bond/ yamabond doesn't like acetone, Soak the case /cylinder in for 30-40 minutes, comes of easily
-
Thanks Adam!