Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Jonsered => Topic started by: Cut4fun . on May 10, 2014, 12:24:20 pm

Title: West Coast Jonsered 2077
Post by: Cut4fun . on May 10, 2014, 12:24:20 pm
1st one I have seen with this air filter set up. 

Jonsered 2077 west coast edition.  Had full wrap big dawgs and this air filter set up.

Title: Re: West Coast Jonsered 2077
Post by: 3000 FPS on May 10, 2014, 09:48:00 pm
Nothing I have ever seen.
Title: Re: West Coast Jonsered 2077
Post by: mdavlee . on May 11, 2014, 09:06:46 am
Never knew they made that setup for them.
Title: Re: West Coast Jonsered 2077
Post by: Thistle on February 22, 2015, 01:30:01 pm
That's a new one for me also.
Title: Re: West Coast Jonsered 2077
Post by: Cut4fun . on February 22, 2015, 02:29:32 pm
That's a new one for me also.

Another I seen.

Check out that poulan WC one too.
Title: Re: West Coast Jonsered 2077
Post by: Thistle on February 22, 2015, 02:51:52 pm
 :o wow
Title: Re: West Coast Jonsered 2077
Post by: 3000 FPS on February 22, 2015, 03:22:00 pm
Yep those are pretty cool looking.
Title: Re: West Coast Jonsered 2077
Post by: Eccentric on February 22, 2015, 04:19:55 pm
That setup looks like it was taken from a demo saw.
Title: Re: West Coast Jonsered 2077
Post by: Cut4fun . on February 22, 2015, 04:33:50 pm
That setup looks like it was taken from a demo saw.

The poulan one was for sale in your state. redding   http://chainsawrepair.createaforum.com/poulan/west-coast-pp475-version/msg41891/#msg41891
Title: Re: West Coast Jonsered 2077
Post by: Eccentric on February 22, 2015, 04:40:11 pm
Redding was somewhat of a honey hole for older saws.  MANY old big displacement saws have been listed on CL there.   There's a few saw maggots (flippers, ebay sellers) in the area that have pretty much picked the place dry.  About a six hour drive for me (one way).
Title: Re: West Coast Jonsered 2077
Post by: David Young on April 03, 2015, 02:20:36 pm
the best part of the saw was the Turbo filtration.

In all honesty I think that filter is just plain stupid. 

Why would you do that?
Title: Re: West Coast Jonsered 2077
Post by: 3000 FPS on April 03, 2015, 04:21:19 pm
the best part of the saw was the Turbo filtration.

In all honesty I think that filter is just plain stupid. 

Why would you do that?

Well to each their own.   What might seem stupid to some is down right cool to others.   
Do you happen to own a 2077 by any chance?
Title: Re: West Coast Jonsered 2077
Post by: Cut4fun . on April 03, 2015, 05:01:28 pm
Dave lot of the west coast edition saws are like that from all brands.  Just something they did out that way.
Title: Re: West Coast Jonsered 2077
Post by: Spike60 on April 04, 2015, 10:06:16 am
   There's a few saw maggots (flippers, ebay sellers) in the area that have pretty much picked the place dry.  About a six hour drive for me (one way).

I love that "saw maggots" term. Accurate too. Many of them seriously misrepresent the saws.
Title: Re: West Coast Jonsered 2077
Post by: Eccentric on April 04, 2015, 06:27:15 pm
   There's a few saw maggots (flippers, ebay sellers) in the area that have pretty much picked the place dry.  About a six hour drive for me (one way).

I love that "saw maggots" term. Accurate too. Many of them seriously misrepresent the saws.

I agree Bob.  It is a very fitting term.  From what I've seen, they often live on a check (or checks) from the government (paid for by our tax dollars), and supplement their income with saw/equipment flipping.   They have more free time to search for saws and other equipment because they don't have a regular job...

I first heard/read it in a post by Jacob J years ago.  His area (southern Oregon) is thick with them....
Title: Re: West Coast Jonsered 2077
Post by: SawTroll on April 06, 2015, 12:34:51 pm
the best part of the saw was the Turbo filtration.

In all honesty I think that filter is just plain stupid. 

Why would you do that?
That being said, the fully developed "air injection" wasn't adopted on those saws before in 1992. The early 7700 and 2077, the 445, 415 and early 660 didn't have it - but had a "prefilter" instead.
Air injection was first used on the 2051 in 1987, and then on the 262xp in 1989.

All had "induction trough the fan" though - but that was a much older invention, at least dating back to the 1960s on chainsaws (Pioneer).
Title: Re: West Coast Jonsered 2077
Post by: Cut4fun on April 06, 2015, 12:51:39 pm
the best part of the saw was the Turbo filtration.

In all honesty I think that filter is just plain stupid. 

Why would you do that?
That being said, the fully developed "air injection" wasn't adopted on those saws before in 1992. The early 7700 and 2077, the 445, 415 and early 660 didn't have it - but had a "prefilter" instead.
Air injection was first used on the 2051 in 1987, and then on the 262xp in 1989.

All had "induction trough the fan" though - but that was a much older invention, at least dating back to the 1960s on chainsaws (Pioneer).

Niko pretty sure you mean 475 and not 445.  The 445 had air injection.

See blue tube in right rear.

(http://chainsawrepair.createaforum.com/index.php?action=dlattach;topic=1125.0;attach=12408;image)

Title: Re: West Coast Jonsered 2077
Post by: 3000 FPS on April 06, 2015, 12:56:43 pm
Over in the thread called 445 there is a picture of the flywheel side.
Title: Re: West Coast Jonsered 2077
Post by: David Young on April 10, 2015, 08:19:39 am
the best part of the saw was the Turbo filtration.

In all honesty I think that filter is just plain stupid. 

Why would you do that?

Well to each their own.   What might seem stupid to some is down right cool to others.   
Do you happen to own a 2077 by any chance?

it started as a 2077 but now it has a bigger heart ;)
Title: Re: West Coast Jonsered 2077
Post by: David Young on April 10, 2015, 08:21:01 am
the best part of the saw was the Turbo filtration.

In all honesty I think that filter is just plain stupid. 

Why would you do that?
That being said, the fully developed "air injection" wasn't adopted on those saws before in 1992. The early 7700 and 2077, the 445, 415 and early 660 didn't have it - but had a "prefilter" instead.
Air injection was first used on the 2051 in 1987, and then on the 262xp in 1989.

All had "induction trough the fan" though - but that was a much older invention, at least dating back to the 1960s on chainsaws (Pioneer).

good point I had forgot about niko
Title: Re: West Coast Jonsered 2077
Post by: Cut4fun . on January 07, 2017, 01:24:54 pm
1st page @Tractorsaw1
Title: Re: West Coast Jonsered 2077
Post by: Cut4fun . on January 07, 2017, 01:28:58 pm
Pulled from the poulan west coast thread

(http://chainsawrepair.createaforum.com/index.php?action=dlattach;topic=3702.0;attach=17045;image)
(http://chainsawrepair.createaforum.com/index.php?action=dlattach;topic=3702.0;attach=17046;image)
Title: Re: West Coast Jonsered 2077
Post by: Cut4fun . on March 14, 2018, 11:54:34 am
another one being sold on bay

Title: Re: West Coast Jonsered 2077
Post by: 3000 FPS on March 14, 2018, 09:05:16 pm
Check out that toggle switch hanging off the side of that saw.   I wonder how many times that gets bumped. 
Title: Re: West Coast Jonsered 2077
Post by: Cut4fun . on March 15, 2018, 07:09:31 am
Check out that toggle switch hanging off the side of that saw.   I wonder how many times that gets bumped. 


2nd one I seen converted to a toggle. Other one if I remember was still on rear though.
Title: Re: West Coast Jonsered 2077
Post by: Cut4fun . on November 16, 2018, 11:46:20 am
Here is what I was looking for.

Just saving his velocity stack here too.