Chainsaw Repair

For Sale - Wanted - Trades - Swaps - Stolen - Recalls - Lost => Locked Sale and Wanted threads => Topic started by: KilliansRedLeo on June 11, 2014, 08:19:52 am

Title: Dolmar 7900 piston
Post by: KilliansRedLeo on June 11, 2014, 08:19:52 am
Looking for a decent used 52mm OEM 7900 piston windowed or slab sided. PM if you have one.
Title: Re: Dolmar 7900 piston
Post by: Cut4fun on June 11, 2014, 01:04:43 pm
Whats a new oem one cost out of curiosity?  Seen used oem ones for $100.  :o :o :o  I was figuring $40-$50 for used ones.
Title: Re: Dolmar 7900 piston
Post by: KilliansRedLeo on June 11, 2014, 01:15:08 pm
New OEM around $100.
Title: Re: Dolmar 7900 piston
Post by: jmester on June 11, 2014, 09:04:36 pm
Would a 064/046 piston work in its place. Are the Dolmar piston and cylinders made by Mahle?
Title: Re: Dolmar 7900 piston
Post by: KilliansRedLeo on June 11, 2014, 09:35:25 pm
Might, I have an 038 Magnum in it right now but it hits the top of the jug with one metalized base gasket. 064  or 046 might be an option. Will let everyone know where I end up at.
Title: Re: Dolmar 7900 piston
Post by: 660magnum on June 11, 2014, 11:16:20 pm
Would a 064/046 piston work in its place. Are the Dolmar piston and cylinders made by Mahle?

The old 7900's are. IDK about the 7910
Title: Re: Dolmar 7900 piston
Post by: KilliansRedLeo on June 14, 2014, 02:48:05 pm
Look here to see the results, I put them in the wrong thread.

 http://chainsawrepair.createaforum.com/dolmar/dolmar-7900-piston-choices/msg41369/#msg41369  (http://chainsawrepair.createaforum.com/dolmar/dolmar-7900-piston-choices/msg41369/#msg41369)