Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Husqvarna => Topic started by: CASE5854x4 on June 19, 2014, 05:01:56 pm

Title: Porting the 395xp
Post by: CASE5854x4 on June 19, 2014, 05:01:56 pm
Hey guys, any porting info. on the 395xp ? I have done tons of Stihl & now have a 395xp to do. Maybe point me to a thread if any are around ??

Thanks,
Steve
Title: Re: Porting the 395xp
Post by: srcarr52 on June 20, 2014, 10:51:35 am
I know mastermind gave you his numbers on another forum, mine are almost identical minus a little intake timing.

In duration
Ex. 160
Trans. 120
In. 158

I like to take around 0.040" out of the squish which puts them around 210psi with 0.020" squish clearance.
Title: Re: Porting the 395xp
Post by: CASE5854x4 on June 20, 2014, 01:31:49 pm
Thanks, sounds like that's the receipe

Steve