Chainsaw Repair

How To Basics - Carb Fixes + Mods - IPL and Service Manuals => How To Basics and Fixes => Topic started by: aclarke on July 14, 2014, 10:17:04 am

Title: throttle cable/sheath
Post by: aclarke on July 14, 2014, 10:17:04 am
Anyone know a source for bulk throttle cable and the sheathed for 372xp/Dolmar?   thanks Adam
Title: Re: throttle cable/sheath
Post by: KilliansRedLeo on July 14, 2014, 11:42:58 am
Mickey Master?
Title: Re: throttle cable/sheath
Post by: Cut4fun . on July 14, 2014, 05:04:24 pm
Adam you saying for making your own or buying in bulk pre-made with ends etc?
Title: Re: throttle cable/sheath
Post by: aclarke on July 14, 2014, 06:19:55 pm
Kev, want to make a longer cable to hook up an Tillotson HL360 on my 7900 to test it out. Found some sources for 7x7 cable and Nylon tube for the sheath.  Probably solder some brass ends on.  I'll post links for material later.  McMaster and most fishing supply outfits have the cable
Title: Re: throttle cable/sheath
Post by: KilliansRedLeo on July 15, 2014, 09:15:01 am
If 660 chimes in I'll bet you could get pre made cables at an RC hobby store!
Title: Re: throttle cable/sheath
Post by: adam32 on July 15, 2014, 09:26:00 am
Kev, want to make a longer cable to hook up an Tillotson HL360 on my 7900 to test it out. Found some sources for 7x7 cable and Nylon tube for the sheath.  Probably solder some brass ends on.  I'll post links for material later.  McMaster and most fishing supply outfits have the cable

Maybe try a cable from a 385/390/395? Might be long enough...
Title: Re: throttle cable/sheath
Post by: aclarke on July 15, 2014, 10:38:33 am
Ordered the R/C control cable (Sullivan s522) which looks like it will work.  Same dia. Cable, sheath may be a hair smaller, should work