Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Homelite => Topic started by: circe on July 16, 2014, 11:55:30 am

Title: fuel to air settings
Post by: circe on July 16, 2014, 11:55:30 am
hi
do anybody have the tuning settings on the homelite super 2. it develop a little flu after 17 years of hard work. when it is cold it works like a dream, but after about 2 minutes it just cut out and wont start. when it has cooled down it start with 1 pull. i cleaned and replaced all filters and feul lines. i also cleaned the carb.

thanks
frikkie
Title: Re: feul to air settings
Post by: 660magnum on July 16, 2014, 12:03:18 pm
Two turns on each needle - it should run and you can adjust from there.
Title: Re: fuel to air settings
Post by: circe on July 17, 2014, 02:55:38 pm
hi
thanks. i got it running today and made a truckload of firewood.

frikkie