Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Stihl => Topic started by: Overkill on August 26, 2014, 05:21:49 pm

Title: tearing down an 019T
Post by: Overkill on August 26, 2014, 05:21:49 pm
any hints to breaking down the saw?  Gotta get to the carb....
Title: Re: tearing down an 019T
Post by: 3000 FPS on May 25, 2015, 07:02:02 pm
Well I have a 019T that I am working on.   The owner had this saw worked on by some one else and could not get it running.
I took it on because he offered me a saddle for free and I had been looking for one.

So I have the saw all tore down and so far I have found the coil rubbing on the flywheel, the fuel line pinched, and the metering diaphragm in backwards.   It is a Walbro carb.    Not a service friendly design and is a reed valve, clamshell, open port engine.    Sure glad that stiihl changed the carb location on the 200T.