Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Husqvarna => Topic started by: CASE5854x4 on July 29, 2011, 11:15:07 pm

Title: Husky 55 Brake handle
Post by: CASE5854x4 on July 29, 2011, 11:15:07 pm

Will a brake handle (plastic), from a 61/268 fit a 55 AI ?

Title: Re: Husky 55 Brake handle
Post by: farmboy on July 30, 2011, 08:50:28 am

Steve, I believe it will bolt up is probably taller or the angle may be slightly different.  Knee link, pivot r/l and spring are the same.  Will check in a few as I have both.
Shep

Title: Re: Husky 55 Brake handle
Post by: farmboy on July 30, 2011, 01:14:51 pm

Measured everything,  the measurements are identical.  The only difference is the comb on the rear slot which is a non factor.  I'll say it will interchange.
Shep

Title: Re: Husky 55 Brake handle
Post by: CASE5854x4 on July 30, 2011, 02:04:09 pm

A big TY to you.