Chainsaw Repair
For Sale - Wanted - Trades - Swaps - Stolen - Recalls - Lost => Trades Swap Section => Topic started by: Cut4fun . on February 26, 2011, 11:31:35 pm
-
Just what it says. When the item is gone, please delete or let me know to delete it for you.
-
This is in FS section but will trade it too if somebody wants it.
I have a like new stihl oem service manual booklet for stihl 084 that I dont need anymore. I sold all my 084 parts off and my 4 084.
GONE
-
me?
-
Need:
041 Super piston
P-61 Brake assy
Poulan 8500/7700/6900 crankcases
Have:
ALOT. What do you need?
-
Wanted a nice clear photo of a Super P100 cylinder and piston i need it for comparision to a P100 cylinder thats all
McBob.
-
Wanted a nice clear photo of a Super P100 cylinder and piston i need it for comparision to a P100 cylinder thats all
McBob.
I would make a thread of your P100 in Partner section and post wanted there too. Might be seen more often. 8)
-
For sale or trade is this Carlton Pro-Champ 20" 3/8 bar. Has a few scratches, but in very good shape. Would trade for a Stihl mount bar of comparable value.
-
For sale or trade is this Carlton Pro-Champ 20" 3/8 bar. Has a few scratches, but in very good shape. Would trade for a Stihl mount bar of comparable value.
I'm not seeing the bar and what mount is it for trade? .050 .058 .063 72dl?
-
I will get pics taken tomorrow and show caliper measurements.
-
Bar gauge.
Quarter = .063 gauge
Penny = .058 gauge
Dime = .050 gauge
-
Bar gauge.
Quarter = .063 gauge
Penny = .058 gauge
Dime = .050 gauge
Can you convert that to Canadian coins?
-
Use a mic caliber that you use for measurements in your porting etc and check your coins thicknesses.
-
I need a handle bar for an 066. Half or 3/4 wrap.
-
LOL just a hair slow. I just gave one away that was tweaked a hair.
I bought a nice new aftermarket for $29 + ship. If you want link let me know.
-
Jonsereds labeled windsor speed tip bar in large husky mount. 15" 3/8 058. Jonsered.
Would be nice to see this make it on a Jonsereds saw for collectivity.
What do you have to trade? BAR IS SPOKE FOR
(http://i59.photobucket.com/albums/g289/doemaster789/034036/034036008.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/034036/034036007.jpg)
-
I have a metal 066 flywheel left over from a project for trades.
-
Stihl 056 Clutch, drum and sprocket
Oiler and oiler gears
Stihl 026 Parts- mufflers, cylinder covers, gas tank, flywheel, ignition
Stihl 029 Parts everything except top handle, piston and cylinder bad
Stihl 036 Cylinder cover, air filter covers
-
Looking for 362,365,372 clutch side case half. Oiler as well
-
bloodontheice, check you pm box for info..................
-
Jonsered 490 clutch shoes. Just posting cell phone pic so person wanting them can see.
-
Looking for a 385 crank
Steve
-
Got a box of 066 parts to trade/sell. 2 cases with cranks, 2 oilers, one carb, 1 tank with hand guard has a little broken, one 1/2 wrap handle, new meteor piston, 2 top covers, one filter cover, one recoil cover. Enough parts for a chain brake, clutch, drum. Have a chain brake handle also. I'll get pictures up in a little while.
-
Here's some pictures.
(http://i726.photobucket.com/albums/ww268/mdavl/saws%202/017-1.jpg)
(http://i726.photobucket.com/albums/ww268/mdavl/saws%202/015.jpg)
(http://i726.photobucket.com/albums/ww268/mdavl/saws%202/013.jpg)
(http://i726.photobucket.com/albums/ww268/mdavl/saws%202/001-9.jpg)
(http://i726.photobucket.com/albums/ww268/mdavl/saws%202/023.jpg)
-
mdavlee is that outer dawg the mate to the inner dawg with part number 1122 664 0508 B if so i might be interested in the outer dawg and hardware.
http://i726.photobucket.com/albums/ww268/mdavl/saws%202/015.jpg
-
Kevin the dawg has part number 1122 664 0503 on it. I don't have an ipl to check the match for it.
-
I'll check and get back.
-
Yes it is a match to my inner dawg on the MS660. PM sent. ;)
-
Clinton D55 with original oem roller nose bar. Trade for ??
Clinton D55 needs HL carb kit and missing sparkplug cover and air hose from carb to filter.
(http://i59.photobucket.com/albums/g289/doemaster789/Clinton268272xp/clinton268272xp007.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/Clinton268272xp/clinton268272xp008.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/Clinton268272xp/clinton268272xp011.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/Clinton268272xp/clinton268272xp010.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/Clinton268272xp/clinton268272xp009.jpg)
MANUFACTURED BY: CLINTON MACHINE COMPANY CLINTON, MICHIGAN, U.S.A. 1959-1964
I decided not to separate the saw and rollernose bar. I just cant do it. Some collector somewhere will appreciate that. Plus the D55 I have looked at all had soild nose bar or PHO. This is the first one I seen to match the ad on acres site with the rollernose.
Recoil rope reinstalled.
Pulled the fuel peacock and ran all new lines inside tank and from carb to peacock. Dang thing had what looks to be original fuel filter in it still.
J 8 spark plug
Bar oiler works :D and runs good as long as I squirt fuel in the carb.
-
Simpson Sears electric sharpener Foley Belsaw
Something else I am never going to use. trades or offers?
Sears Simpson is or was the Canadian version of Sears back when in the '70's I was told.
Was told it was either made by Foley Belsaw and this one is a Model 306 on the tag.
It still works but is getting lose over age and I could only find 3 parts that could still be bought. Plus it didnt do what I was wanting to do with chains, so I bought a stihl usg to use for needs.
306 seems to be a earlier model then the 308 from my readings. I dont even think there is a way to clamp the vise tight against the chain on the 306 going from memory. I do know the electric motor on them is $100 new. This one is good to go from the short time I had it on.
So if somebody collects older sharpeners, I will trade for something interesting new or old.
-
I have a metal 066 flywheel left over from a project for trades.
066 flywheel spoke for
-
The good case is gone, chain brake handle is gone, and the black piece on the handle for the trigger interlock is gone. All the other parts are still there.
-
Clinton D55 with original oem roller nose bar. Trade for ??
MANUFACTURED BY: CLINTON MACHINE COMPANY CLINTON, MICHIGAN, U.S.A. 1959-1964
I decided not to separate the saw and rollernose bar. I just cant do it. Some collector somewhere will appreciate that. Plus the D55 I have looked at all had soild nose bar or PHO. This is the first one I seen to match the ad on acres site with the rollernose.
Recoil rope reinstalled.
Pulled the fuel pea**** and ran all new lines inside tank and from carb to pea****. Dang thing had what looks to be original fuel filter in it still.
J 8 spark plug
Bar oiler works :D and runs good as long as I squirt fuel in the carb.
[/quote]
GONE traded off
-
;D It didn't leave Ohio though .Now residing in a rest home with other older saws .Some of which are a slightly different color of yellow .
-
Glad to see it got a good home. ;)
-
I have this 268xp SE with 272xp 72cc top end that I took in trade back in march. I have no use for it and just sets on my shelf.
Would be interested in interesting trades of about anything or entertain offers of $ in PM.
Here is a thread with pics. Seems that the 268xp SE tagged saws were more rare.
PHO = power head only
http://chainsawrepair.createaforum.com/husqvarna/husqvarna-268/
GONE
-
Also for trade for something interesting is my Keech throwing axe with leather sheaths or sale out right. PM me your trade offeres.
http://chainsawrepair.createaforum.com/for-sale/keech-keesteel-throwing-axe-w-handle-and-leather-sheaths/
GONE
-
Don't know why but I'm in the market for a husky L77. If someone has a nice one to let go please let me know. I take it I am allowed to post this here. If not please don't beat me for it...
-
Updating the GONE list of mine.
Post up the trades if you got them.
-
NLA = gone
Trade for ?
I have the metal brake handle and all the parts to install in your clutch cover for the 268 272 266 61 66 etc saws. Just needs another brake band the one in it was broke.
Just the brake handle and parts. Saw and clutch cover gone or used.
(http://i59.photobucket.com/albums/g289/doemaster789/Clinton268272xp/clinton268272xp005.jpg)
-
Echo 3900 PHO. All it needs is a coil. Here is the long winded story http://chainsawrepair.createaforum.com/echo/echo-3900/
-
Few poulan 3400 parts left to trade off. Flywheel, complete recoil, muffler, cylinder (needs cleaned up), intake. Maybe some other stuff.
-
2 stihl 16" 3/8 050 bars in 026-066 mount.
Jonsered 490 590 complete air filter with choke set up.
-
Got a pic of the 490 filter setup? Plug cap is broke off mine.
-
Got a pic of the 490 filter setup? Plug cap is broke off mine.
This one is perfect and I will try and get a pic tomorrow. It was my personal 490 back up filter I never used.
-
choke closed GONE
(http://i59.photobucket.com/albums/g289/doemaster789/490/490airfiltercylcover001.jpg)
choke open
(http://i59.photobucket.com/albums/g289/doemaster789/490/490airfiltercylcover003.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/490/490airfiltercylcover004.jpg)
-
jonsered 490 cylinder cover I just found. GONE
(http://i59.photobucket.com/albums/g289/doemaster789/490/490airfiltercylcover005.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/490/490airfiltercylcover006.jpg)
-
By complete I thought it had the black filter cover also. Thats the part I need.
-
LOL sorry about that. Reason I said complete is people sale them without the choke parts too. Learned that when I was looking for a extra filter.
I just got rid of the last air filter cover I had a couple months ago. If I find one I will let you know. ;)
-
Art here is 3 new 490 590 air filter covers http://www.ebay.com/itm/JONSERED-490-590-AIR-FILTER-COVER-STBX548-/350516397179?pt=LH_DefaultDomain_0&hash=item519c67c47b
-
Some stihl stuff to trade.
New 026 brake cover and a used 034 036 brake cover.
(http://i59.photobucket.com/albums/g289/doemaster789/034036/036cp590c006.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/034036/036cp590c004.jpg)
-
Been holding this stihl 036 pro cylinder and piston back for a project for myself, but none is turning up for builders. Cylinder and piston would clean up easily IMO.
The horizontal lines in pic 3 are not on cylinder, just in the pic some how. ???
(http://i59.photobucket.com/albums/g289/doemaster789/034036/036cp590c007.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/034036/036cp590c013.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/034036/036cp590c002.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/034036/036cp590c003.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/034036/036cp590c005.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/034036/036cp590c010.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/034036/036cp590c011.jpg)
-
NLA both bars spoke for in trade GONE
Stihl E 16" 026 - 066 mount 3/8 050 60dl used bars. Straight, no nicks or chips in rails.
I'm not into painting bars so this is the way they are and look as used. I have had painted bars come in and when the paint under the bar cover starts peeling I have seen it start clogging oil passages.
Bar #2 and #4 left.
(http://i59.photobucket.com/albums/g289/doemaster789/028super/026066bars002.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/028super/026066bars003.jpg)
-
I came across 2 complete husqvarna 372 365 362 flywheels I have no use for anymore. Open to trades, offers, etc.
GONE
-
Email sent
-
Email sent
They are both yours.
-
I have some saws I have lost interest in and dont plan on putting back together, others are together and running and cutting. Just clearing out some series of saws I dont want on my shelves anymore. Open to trades of ??? or ? Just PM me with your ideas.
Poulan S25DA needs put back together. Saw wasnt running when came into me on trade for my labor working on a saw for a guy. Tore it down and just never got back around to it.
Homelite XL2 older one with metal case, needs put back together. Needs carb kit and fuel line. Runs all day while squirting mix in carb. Have paperwork where bought new in 1980 with red case.
Homelite XL 1 owner till it came in trade. Has primer bulb fuel cap that is ****, but it is not needed as it starts and runs and cuts fine. Might need a carb kit down the road.
Poulan Pro 236 builder, starts but has issue with seals and crank bearings. (trade is being worked out on this one right now) but just in case.
Poulan 1800 runs and cuts. Came in trade on a bigger saw.
Poulan s25da with red name tag in pic. Is disassembled now. Never pulled c+p etc though, just short blocked.
(http://i59.photobucket.com/albums/g289/doemaster789/2002envoy/poulan25001.jpg)
XL2 disassembled now. Just needs carb kit and fuel line.
(http://i59.photobucket.com/albums/g289/doemaster789/262alky/homelite002.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/Partner550/xl2001_zpse4dbb460.jpg)
XL
(http://i59.photobucket.com/albums/g289/doemaster789/PP325/newbar325001_zpscb1f7ec3.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/PP325/newbar325009_zps01f2e9e5.jpg)
Poulan 236 needs rebuilt
(http://i59.photobucket.com/albums/g289/doemaster789/201T/pp236solo637001_zpsaec378fa.jpg)
Poulan 1800 runs cuts
(http://i59.photobucket.com/albums/g289/doemaster789/034036/poulan1800project003.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/034036/poulan1800project001.jpg)
-
Partner 500 5000 5000plus Jonsered 490 590 Poulan pro 325 GONE
Some NOS stuff never used.
Muffler has already been modded.
If you just need certain parts, throw ideas to me in PM's.
(http://i59.photobucket.com/albums/g289/doemaster789/490/5000490parts001_zps4df60809.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/490/5000490parts003_zps107e7948.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/490/5000490parts004_zps65ffc599.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/490/5000490parts005_zps46dd1359.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/490/5000490parts006_zps012a5c7d.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/490/5000490parts007_zps3341c532.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/490/5000490parts008_zps3c03e33e.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/490/5000490parts009_zps907ca5c2.jpg)
-
Just come across a echo 330 evl 330evl on the shelf partially disassembled.
No pics yet. PM or let me know here if needed. Looks in great shape outside. I know nothing about what is wrong with it.
-
Partner 500 5000 5000plus Jonsered 490 590 Poulan pro 325
Some NOS stuff never used.
Muffler has already been modded.
If you just need certain parts, throw ideas to me in PM's.
They are all spoken for.
-
i have 2 of these. no need for them and really no interest in finding a saw to put them on. they're for a mcculloch pm1000 or partner p100 etc.
check the part number:505 315 550
(http://i41.tinypic.com/2nc2j5i.jpg)
(http://i41.tinypic.com/2r24yeq.jpg)
(http://i44.tinypic.com/wmiiid.jpg)
(http://i40.tinypic.com/juxyd1.jpg)
looking to trade both for a n.i.b. mcculloch bp1 straight up ;D
both nos never used, just dusty from storage. no holes or rips. excelent condition.
throw me an offer on one or both. maybe an interesting trade or offer of moolah, don't care.
-
update
poulan 236 is spoke for and traded off.
-
I found 2 of these left over from my 066's 660 days. NEW stihl 066 top av motor mounts. Pic in this ebay ad. http://www.ebay.com/itm/STIHL-AV-MOUNT-BUFFER-1122-790-9920-for-064-066-MS660-CRANKCASE-UPPER-TO-TANK-/350634789573?hash=item51a3764ac5
STIHL AV MOUNT BUFFER 1122 790 9920 for 064 066 MS660 CRANKCASE (UPPER) TO TANK
-
I came across a box with new never used husqvarnal225 leaf blower mulching kit and or vacuum kit too. Pay for shipping and it's yours. Sold the blower long ago. Forgot I had this stuff on a top shelf.
Husqvarna 531030390 Vacuum Kit for 225 Has this plus some other stuff in it. http://www.ebay.com/itm/like/231406870697?lpid=82
In a pretty long box.
-
I came across a box with new never used husqvarnal225 leaf blower mulching kit and or vacuum kit too. Pay for shipping and it's yours. Sold the blower long ago. Forgot I had this stuff on a top shelf.
Husqvarna 531030390 Vacuum Kit for 225 Has this plus some other stuff in it. http://www.ebay.com/itm/like/231406870697?lpid=82
In a pretty long box.
Spoke for
-
I found 2 of these left over from my 066's 660 days. NEW stihl 066 top av motor mounts. Pic in this ebay ad. http://www.ebay.com/itm/STIHL-AV-MOUNT-BUFFER-1122-790-9920-for-064-066-MS660-CRANKCASE-UPPER-TO-TANK-/350634789573?hash=item51a3764ac5
STIHL AV MOUNT BUFFER 1122 790 9920 for 064 066 MS660 CRANKCASE (UPPER) TO TANK
Also found 2-3 of those stihl 084 HD air filter base special nuts made of aluminum. 1124 141 8305 11241418305
-
sorted through a ton of parts I bought Monday, took about 6 hours to sort by series
I am pretty sure everything smaller than 044 is going to go, I have a local buddy who preauthorized me to spend his money on 021/23/25 and 029/39 parts but there are also boxes and saws in the 019, Ms180, 028, 024/26, 034/36, MS361, 038/super families as well as a few oddball parts for 031/042, I also have a nice looking pair of 192ts that run pretty rough I will probably never get around to working on and a ton of 050/51/75/76 stuff
Stuff I need - 075 or similar flat top cover badge any condition as long as still flat, 200T oil pumps, 044/46/440/460/064 small stuff, 064 cylinders, nice old style engraved stihl bar to fit 075, any cool Stihl garb I don't already have
Dave
-
Dave did that load include any 048 parts?
-
I found an 048/042 air filter cover, yours if you want it
I got some new carb kit versions to send you as well.
Dave
-
Dave did that load include any 048 parts?
What do you need?
-
A good P/C. Gotta fix a scored saw for a guy that let's us run his earth moving equipment at the park. This reminds me.........I need to call him back.
May have a good used p/c from Thomas1 lined up. Need to call him too...
-
I found an 048/042 air filter cover, yours if you want it
I got some new carb kit versions to send you as well.
Dave
Thank you Dave. I need to double check to see if the AF cover on the saw is good.
I'm game for the carb kits. So far the kits look good.
-
Notta on that.
-
I found 2 of these left over from my 066's 660 days. NEW stihl 066 top av motor mounts. Pic in this ebay ad. http://www.ebay.com/itm/STIHL-AV-MOUNT-BUFFER-1122-790-9920-for-064-066-MS660-CRANKCASE-UPPER-TO-TANK-/350634789573?hash=item51a3764ac5
STIHL AV MOUNT BUFFER 1122 790 9920 for 064 066 MS660 CRANKCASE (UPPER) TO TANK
Also found 2-3 of those stihl 084 HD air filter base special nuts made of aluminum. 1124 141 8305 11241418305
Cut, I would be interest in those nuts if you still have them.
-
I found 2 of these left over from my 066's 660 days. NEW stihl 066 top av motor mounts. Pic in this ebay ad. http://www.ebay.com/itm/STIHL-AV-MOUNT-BUFFER-1122-790-9920-for-064-066-MS660-CRANKCASE-UPPER-TO-TANK-/350634789573?hash=item51a3764ac5
STIHL AV MOUNT BUFFER 1122 790 9920 for 064 066 MS660 CRANKCASE (UPPER) TO TANK
Also found 2-3 of those stihl 084 HD air filter base special nuts made of aluminum. 1124 141 8305 11241418305
Cut, I would be interest in those nuts if you still have them.
Should still be in the bin on the shelf. New slotted aluminum special type nuts I got for the HD bases.
-
Pm sent
-
Pm sent
When I go out to put plow on today. I will try to remember to look and get a pic.
-
These are now spoke for and NLA. 084 HD air filter base slotted special nuts made of aluminum 1124 141 8305 11241418305
-
There is a guy offering me a used 490 5000 plus cylinder for $50 shipped. I am not interested. If anyone here is let me know and I will try and hook you up with seller.
I have not seen any pics.
-
I'm looking for a high top cover for a 288xp! Also looking for a non flippy tank for a 044. Well I might as well add a hda87 carb to the ya right list lol.
-
Welcome to the site. 8)
-
I'm looking for a high top cover for a 288xp! Also looking for a non flippy tank for a 044. Well I might as well add a hda87 carb to the ya right list lol.
Welcome to the site.
You can also list in the wanted area if looking for straight out buys etc too.
Can buy sell or whatever here. All FREE. ;) We are all sponsors of this site by just being a member.
-
Come across some left over parts. Trades for?
echo 8000 air filter
echo 670 6700 clutch cover with brake internals. The one with no brake handle though.
-
Hi Cut,
Are you wanting to trade out an 8000 filter or do you need an 8000 filter?
-
Hi Cut,
Are you wanting to trade out an 8000 filter or do you need an 8000 filter?
Sold the 800V and found the extra filter.
-
Ok, I have an 044 cylinder off of a 12mm saw & a 460 cylinder. Both have some transfer that needs removed & the 044 cylinder has a spot below the exhaust that is a little concerning. I will try & get some pics up later.
I could use a 385/390 crank, 24-28" bar to fit that, a 16" 325 bar for my 2152, also been looking for an older type file guide. I have a little bit of everything, let me know what you have in mind for a swap.
Could also use a 385 flat style filter for a Jonsered 2186
Thanks!
-
Bar gauge.
Quarter = .063 gauge
Penny = .058 gauge
Dime = .050 gauge
Learn something Every day ty
-
Got alot of chit I no longer need.
Open to trades for other stuff I could use.
16" 058 bar K095 husky branded oregon powermatch small husky mount. Also 058 husky 48 branded chain 3/8 60dl.
20" 058 bar D009 husky branded oregon powermatch.
echo 8000 air filter
Hitting brain block. Just the few things off the top of my head.
16" b+c happen to be in pics.
-
Will trade saws for bang bangs. Just use your FFL or dealer to ship to my Bro with FFL.
Yeah I'm having fun busting caps again.
-
Right now I am in the mood big time to trade saws, parts etc for ammo, guns, maybe the right knives etc.
I know I have a rebuilt poulan pro 365 good looking craftsman 3.0 aka a poulan 3000 with bare bore basically. Another well used but good runner craftsman 3.0. poulan pro 295 poulan 1800 built from about 3 saws. poulan 2700 might be more poulans.
Echo 4500, parts saw john deere 450. Echo 702 can go. Echo 452. Echo 3900 used in the chain build off rd 1.
NLA 1 3.0, PP295, 2700, 702
-
Dolmar 6400 7300 7900 crankcase left half. If anyone needs one. The last crankshaft has been pulled and shipped.
(http://i59.photobucket.com/albums/g289/doemaster789/570/dolmar7900parts%20008_zpsedcwffjg.jpg) (http://s59.photobucket.com/user/doemaster789/media/570/dolmar7900parts%20008_zpsedcwffjg.jpg.html)
-
Got alot of chit I no longer need.
Open to trades for other stuff I could use.
16" 058 bar K095 husky branded oregon powermatch small husky mount. Also 058 husky 48 branded chain 3/8 60dl. SOLD
20" 058 bar D009 husky branded oregon powermatch.
echo 8000 air filter
Hitting brain block. Just the few things off the top of my head.
16" b+c happen to be in pics.
-
Just in case someone is in need. Know where there is Remington PL4 - Remington PL5 piston cylinder kits for sale new.
-
Trade a still like new Carlton K095 German made bar in small husky mount 3/8 050 72dl for a stihl 660 440 mount bar in same 20" 3/8 050 72.
I bought the bar for a 362xp and then sold the saw. No use but test cuts on it.
One on left
NLA
(http://i59.photobucket.com/albums/g289/doemaster789/362XP/carltonbars001.jpg) (http://s59.photobucket.com/user/doemaster789/media/362XP/carltonbars001.jpg.html)
(http://i59.photobucket.com/albums/g289/doemaster789/362XP/262xpcover002.jpg)
(http://i59.photobucket.com/albums/g289/doemaster789/362XP/262xpcover003.jpg) (http://s59.photobucket.com/user/doemaster789/media/362XP/262xpcover003.jpg.html)
-
I could use that K095 bar, but I don't have a D025 bar to trade for it.
-
I could use that K095 bar, but I don't have a D025 bar to trade for it.
I got a pretty penny in that bar when I bought it Aaron. Shipping alone would kill it even fedex'ed.
-
I could use that K095 bar, but I don't have a D025 bar to trade for it.
I got a pretty penny in that bar when I bought it Aaron. Shipping alone would kill it even fedex'ed.
Bar spoke for in a trade.
-
I could use that K095 bar, but I don't have a D025 bar to trade for it.
I got a pretty penny in that bar when I bought it Aaron. Shipping alone would kill it even fedex'ed.
No worries my friend.
-
NLA GONE
I just cut 2 of the jonsered saws I wanted to hang up in the barn 36" x 29.5" long each.
I decided to sell or trade the rest off. There is 2 fulls and a half left.
Made from corrugated cardboard type stuff. Only way lighter.
The 2 and half is left at the right end.
(http://chainsawrepair.createaforum.com/index.php?action=dlattach;topic=5844.0;attach=18122;image)
(http://chainsawrepair.createaforum.com/index.php?action=dlattach;topic=5844.0;attach=18123;image)
-
Looking to trade for rear handle saws or ?
Pics in thread below. 2 run, 3rd never tried as missing rope. red one is a AV antivibe model
I was thinking of keeping the 2 rollernose bars but can be worked out.
http://chainsawrepair.createaforum.com/poulan/blue-red-yellow-38cc-top-handles/msg73790/#new
-
Any poulan collectors looking for a D176 light use banana nose bar. 3/8 70dl 20".
K041 bar set on top of the D176 bar to show mount area.
Came on a saw I picked up but I dont use these bars.