Chainsaw Repair

For Sale - Wanted - Trades - Swaps - Stolen - Recalls - Lost => Locked Sale and Wanted threads => Topic started by: jmester on September 11, 2014, 09:45:15 pm

Title: 066/MS660 piston
Post by: jmester on September 11, 2014, 09:45:15 pm
Looking for a used piston. That is still usable.
Title: Re: 066/MS660 piston
Post by: 660magnum on September 11, 2014, 10:39:44 pm
I just buy the Meteor pistons. They are reasonably priced. I've never had any trouble with one.

I've not been re-using pistons that didn't have the original machining marks on them all around.
Title: Re: 066/MS660 piston
Post by: jmester on September 12, 2014, 05:43:07 am
Will have to look in to meteor. I am thinking of selling it. Do you think for resale it would be better with oem or aftermarket ? My experience with aftermarket is I have not been real pleased with aftermarket in the past was not near the quaility as oem. Those where also NWP big bore kits.
Title: Re: 066/MS660 piston
Post by: 660magnum on September 12, 2014, 07:16:31 am
Meteor approaches OEM in quality. I've been using Meteor as replacements in several saws.

There are a couple fitments where people consider the Meteor to be heavier than OEM.
Title: Re: 066/MS660 piston
Post by: mdavlee . on September 12, 2014, 08:43:48 am
Meteor is as nice as oem on most pistons. Never had a problem with any of them out of 20-30.
Title: Re: 066/MS660 piston
Post by: Cut4fun . on September 12, 2014, 01:29:38 pm
meteor kits come with caber rings too. = to OEM IMO
Title: Re: 066/MS660 piston
Post by: jmester on September 12, 2014, 07:48:58 pm
Thanks guys for your help. Sounds like the meteor pistons are good stuff. You can close this now. I went ahead a got an oem piston. In the future I am going to give meteor a shot. Where do you all get them from HL SUPPLY or NORTHWOOD SAW ?
Title: Re: 066/MS660 piston
Post by: 660magnum on September 12, 2014, 07:50:51 pm
Either place