Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Pioneer => Topic started by: Bob on October 13, 2014, 12:24:38 pm
-
Does anyone know what the carb settings are for a Pioneer p41 saw built in the early 80s it has a tillotson carb on it.
Thank You
-
Hi Bob,
Start with one turn out on both high and low mixture screws and go from there. Mine ended up around 1-1/16 on the low and one on the high.
-
Does anyone know what the carb settings are for a Pioneer p41 saw built in the early 80s it has a tillotson carb on it.
Thank You
The paper work I have for this saw gives the default settings as Lo 1&1/8 & Hi as 7/8 turns out from lightly seated