Chainsaw Repair
Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Jonsered => Topic started by: dolmar on October 16, 2014, 08:27:04 pm
-
do they make a 3/8 sprocket for a jonsered 2050
-
I don't really see why anyone would want that - but it really is a question of finding a suitable drum and rim setup.
-
Do you have spur or replaceable rim on it now. IPL shows rim with .325 just change to 3/8 7 small if you really need too.
Is the jred 2050 like a husky 350 or even close? I wouldnt want 3/8 on it stock.
jonsered 2041 2045 2050 IPL http://www.jonsered.com/ddoc/JONI/JONI1994_AAaa/JONI1994_AAaa_I9400005_.pdf
-
Look at the .325 chains you have and compare them with what you may be able to buy?
There is a big difference in some .325 chains as some have more or less small "low profile" cutters and others have much larger cutters.
The only .325 saws I have are Stihls and the Chains are Stihl "RS" and "RM" styles with large cutters. These saws have .063" gauge bars and I don't know if your local Stihl dealer would stock these chains in .050"? I really like the chains.
-
Do you have spur or replaceable rim on it now. IPL shows rim with .325 just change to 3/8 7 small if you really need too.
Is the jred 2050 like a husky 350 or even close? I wouldnt want 3/8 on it stock.
jonsered 2041 2045 2050 IPL http://www.jonsered.com/ddoc/JONI/JONI1994_AAaa/JONI1994_AAaa_I9400005_.pdf
It is older, and a totally different design - belonging to the "family" that is based on the P400 - and closest to the P510 and Husky 49.
-
Good to know I get confused on the jreds still. 2050 2150 etc etc. Thanks
-
http://www.jonsered.com/ddoc/JONI/JONI1994_AAaa/JONI1994_AAaa_I9400005_.pdf