Chainsaw Repair
Chain - Grinders - Filing - Wood Milling - Tools - Welding - Machinist - Mowers - Tillers => Welding Shop => Topic started by: 3000 FPS on November 28, 2014, 06:04:11 pm
-
Welded this handle back together. Have another one to do also that was broken almost in the same exact spot.
-
+1 give that man a like
-
Thanks Jim.
-
If you let knowledge of that skill get spread around, you will be a very popular guy.
That was a weak spot on those handles. I've never broken one but have seen a pickup load that were.
Mike
-
I hear ya Mike. I have already started to screen what welding jobs I take on.
-
I have already started to screen what welding jobs I take on.
3400 welding handles :o 8)
If I ever have to split my 415 475 445 I was going to call on ya. To fix my redneck fixes and to do it right with your sweet welding.
P.S. I lost your # with carrier and phone change. So would PM first to hook back up. But hopefully I will never have to split.
Kevin
-
So I finished welding up the 2nd broken handle and I am comparing it to the other one I did before and it looks different. I did not have the other side of the handle sent to me so I fitted the 2 broken pieces together I thought pretty straight. Man was I wrong. I took one of my saws apart and tried to fit the handle on there and neither one was even close. So that means I have to break apart the weld or try anyways and re-weld them again. I am not happy about this and will never make this mistake again. You might say steam is coming out my ears.
-
Been there and done that on machinery pieces in the past.
-
Well I got off my butt today and fixed those handles I screwed up.
They were really crooked. I put them on a Poulan 4000 I have and marked them and cut them in half with a hack saw and then got them all straightened out and welded them while on the saw.
So both handles are now done and I can ship them back.
-
Nicely done!
-
Nicely done!
AMEN!!!!!!!!!
Shep
-
I learned a few things when doing these handles and in the end I was happy to get them done for a fellow chainsaw collector such as myself. Thanks.
-
Didnt even think about that. Is that those 2 same sides I seen earlier?
Nice work and catch, I hope before sending back.
-
Same side of the handle but two different pieces.
-
you continue to produce great work. I stand amazed