Chainsaw Repair

Chain - Grinders - Filing - Wood Milling - Tools - Welding - Machinist - Mowers - Tillers => Chain - Bars - Grinders - Filing => Topic started by: Cut4fun . on February 08, 2015, 07:43:42 pm

Title: Chainsaw bar weights
Post by: Cut4fun . on February 08, 2015, 07:43:42 pm
Husqvarna techlite 28" 

(http://photo.blsnelling.com/Chainsaws/Oregon-Reduced-Weight-Bar/i-HDk84Zg/0/M/IMG7353-M.jpg)

Title: Re: Chainsaw bar weights
Post by: Cut4fun . on February 08, 2015, 07:45:43 pm
Stihl ES light 28"

(http://photo.blsnelling.com/Chainsaws/Oregon-Reduced-Weight-Bar/i-zrHFzK5/0/M/IMG7351-M.jpg)
Title: Re: Chainsaw bar weights
Post by: Cut4fun . on February 08, 2015, 07:46:26 pm
Oregon reduced weight 28"

(http://photo.blsnelling.com/Chainsaws/Oregon-Reduced-Weight-Bar/IMG4157/690356695_ht4UP-M.jpg)

Title: Re: Chainsaw bar weights
Post by: Cut4fun on February 09, 2015, 01:32:29 pm
24" oregon powermatch

(http://www.pbase.com/wyk/image/134607592/large.jpg)
Title: Re: Chainsaw bar weights
Post by: Cut4fun on February 09, 2015, 01:33:16 pm
32" oregon light weight bar

(http://www.pbase.com/wyk/image/133561599/large.jpg)
Title: Re: Chainsaw bar weights
Post by: Cut4fun on February 09, 2015, 01:43:37 pm
16" es

(http://img685.imageshack.us/img685/2820/img20120906024159.jpg)
Title: Re: Chainsaw bar weights
Post by: Cut4fun on February 09, 2015, 01:44:32 pm
16" small husky oregon powermatch

(http://img14.imageshack.us/img14/7275/img20120906024306.jpg)
Title: Re: Chainsaw bar weights
Post by: Cut4fun on February 09, 2015, 01:45:20 pm
16" total bar weight

(http://img411.imageshack.us/img411/9291/img20120906024013.jpg)
Title: Re: Chainsaw bar weights
Post by: Cut4fun . on May 16, 2015, 04:01:25 pm
@Gatekeeper  just in case you missed westcoasters post.

K095 mount 16" Oregon prolite and Cannon

westcoaster = Both 3/8's .058 16". Not an 18" but i'm sure the results would be similar. a 346 550 balances perfect with a 16" 18" cannon and i feel there is no need to go lighter.

Title: Re: Chainsaw bar weights
Post by: mdavlee . on May 16, 2015, 04:05:51 pm
Thanks Kevin. My dad is wanting a little more reach.
Title: Re: Chainsaw bar weights
Post by: Cut4fun . on May 16, 2015, 04:17:35 pm
Thanks Kevin. My dad is wanting a little more reach.

I am just surprised about the Cannon bar being lighter. This is good to know.  I would have bet all day against it not knowing.
Title: Re: Chainsaw bar weights
Post by: mdavlee . on May 16, 2015, 08:29:49 pm
Cannon steel is good and different grades of steel weigh a little bit different.
Title: Re: Chainsaw bar weights
Post by: Nathaniel Vansickle on November 14, 2015, 04:03:04 pm
(https://farm6.staticflickr.com/5783/23016371705_49e710f1b2.jpg) (https://flic.kr/p/B4SVqV)002 (https://flic.kr/p/B4SVqV) by nathaniel vansickle (https://www.flickr.com/photos/128772764@N05/), on Flickr

Total Light and Tough 20" large mount Husky

(https://farm1.staticflickr.com/758/23027522771_bf7b62f960_h.jpg) (https://flic.kr/p/B5S5fF)AS 018 (https://flic.kr/p/B5S5fF) by nathaniel vansickle (https://www.flickr.com/photos/128772764@N05/), on Flickr

Total Super 20" small mount Husky

(https://farm1.staticflickr.com/715/22393601514_c3cc2339b7.jpg) (https://flic.kr/p/A7R4xQ)001 (https://flic.kr/p/A7R4xQ) by nathaniel vansickle (https://www.flickr.com/photos/128772764@N05/), on Flickr

SugiHara Light 20" small mount Husky
Title: Re: Chainsaw bar weights
Post by: Nathaniel Vansickle on April 28, 2016, 06:16:23 pm
Total Super Light and Tough 20" 3/8 .050 K095

(https://farm2.staticflickr.com/1655/26095557914_8eba36c5d1_c.jpg) (https://flic.kr/p/FKYydj)AS 001 (https://flic.kr/p/FKYydj) by nathaniel vansickle (https://www.flickr.com/photos/128772764@N05/), on Flickr
Title: Re: Chainsaw bar weights
Post by: SawTroll on June 13, 2016, 08:56:33 am
@Gatekeeper  just in case you missed westcoasters post.

K095 mount 16" Oregon prolite and Cannon

westcoaster = Both 3/8's .058 16". Not an 18" but i'm sure the results would be similar. a 346 550 balances perfect with a 16" 18" cannon and i feel there is no need to go lighter.



I just weighted a Sugihara "Superlight" laminate in 16" (66dl) .325 .058 K095 with a 10t nose. It came out at 690 grams = 1.52 lbs = 1 pound 8.3 oz.

It isn't a surprice to me that the Oregon ProLite weights as much as some RSN bars, as those are heavy for laminated bars.

I'm not claiming my scale is accurate, it is an old mechanical postal scale.  :D
Title: Re: Chainsaw bar weights
Post by: SawTroll on June 13, 2016, 09:01:46 am
Total Super Light and Tough 20" 3/8 .050 K095

(https://farm2.staticflickr.com/1655/26095557914_8eba36c5d1_c.jpg) (https://flic.kr/p/FKYydj)AS 001 (https://flic.kr/p/FKYydj) by nathaniel vansickle (https://www.flickr.com/photos/128772764@N05/), on Flickr

My scale just showed 2 pounds 0.4 oz on a similar (.058 though) Tsumura branded bar - so I guess it isn't that far off.
Title: Re: Chainsaw bar weights
Post by: Cut4fun on June 21, 2016, 05:03:47 pm
Familiar looking name brand bar Tsumura with Laser name. Sold at CuttersChoice http://www.cutterschoice.com/templates/product.aspx?ProductGuid=41117&GroupGuid=122

(http://www.cutterschoice.com/catalog/images/zoom/Product_Small/41117_1_ultra_lite_bar.jpg)
Title: Re: Chainsaw bar weights
Post by: mdavlee . on June 21, 2016, 05:06:06 pm
They were using them before. Carlton did some as well but never the lightweight
Title: Re: Chainsaw bar weights
Post by: Cut4fun . on June 21, 2016, 09:12:32 pm
They were using them before. Carlton did some as well but never the lightweight

I was only talking about them being in the lightweights.

3 threads on the other laser bars.
Title: Re: Chainsaw bar weights
Post by: mdavlee . on June 22, 2016, 05:59:18 am
True. I guess any one can get them now in their brand since a few are selling them over here instead of just Tilton
Title: Re: Chainsaw bar weights
Post by: fisaw on December 03, 2016, 05:35:24 am
12" / 30cm   SXEA095   
(http://u.cubeupload.com/finland1/SXEA095.jpg)

14" / 35cm  Rollomatic E Light 3005 000 7409
(http://u.cubeupload.com/finland1/30050007409.jpg)

13" / 32cm 3003 000 6306    3/8LP , 50cc  saws 
(http://u.cubeupload.com/finland1/30030006306.jpg)

16" / 40cm 3003 000 6313     
(http://u.cubeupload.com/finland1/30030006313.jpg)

18" / 45cm 3003 000 6317   
(http://u.cubeupload.com/finland1/30030006317.jpg)
Title: Re: Chainsaw bar weights
Post by: fisaw on December 09, 2016, 05:11:31 am
Oregon 15" / 38cm   .325"  0.50"  Pro-lite   150MPBK095  (  country of origin is missing..  :(  )
623g = 1.37LBS
(http://u.cubeupload.com/finland1/150MPBK095.jpg)

COO
(http://u.cubeupload.com/finland1/MPBK095.jpg) 
Title: Re: Chainsaw bar weights
Post by: Cut4fun . on December 09, 2016, 12:31:16 pm
Just wow even oregon going to China bars.
Title: Re: Chainsaw bar weights
Post by: Eccentric on December 09, 2016, 03:20:31 pm
Wow....
Title: Re: Chainsaw bar weights
Post by: fisaw on December 10, 2016, 09:13:02 am
"Husqvarna" 16" / 40cm  .325"  0.50"  ( 508 92 61-66) 
(http://u.cubeupload.com/finland1/40cm325050.jpg)
Title: Re: Chainsaw bar weights
Post by: Cut4fun . on December 10, 2016, 09:37:54 am
Wow....

You see where the China made MS250 stihls are being shipped to dealers now. Art stated  shop he works at got them in.
 In thread China made 250 here.
Waiting on pics. 
Title: Re: Chainsaw bar weights
Post by: Eccentric on December 11, 2016, 09:46:55 pm
Yuck
Title: Re: Chainsaw bar weights
Post by: Cut4fun . on December 19, 2016, 04:35:06 pm
For @fisaw  Did you see the carbed type II NE 261 pics in thread I told you about?


fisaw pics switched.  Seemed like they loaded quicker. Is that what you were fixing?

Title: Re: Chainsaw bar weights
Post by: fisaw on December 20, 2016, 07:17:07 am
12" / 30cm Rollomatic E Light 3005 000 7405   ,  very light ( ~0.73lbs )   
(http://u.cubeupload.com/finland1/Stihl12inchlight.jpg)

For @fisaw  Did you see the carbed type II NE 261 pics in thread I told you about?
fisaw pics switched.  Seemed like they loaded quicker. Is that what you were fixing?       
Yes, thank you
Title: Re: Chainsaw bar weights
Post by: fisaw on December 26, 2016, 12:10:45 pm
Found some pics 

15" / 38cm  .325"  0.50"  150TXLBK095 , paid 19,50. I also bought a 13" TXLBK095 but I had to return it ( bar sprocket bearing/too much play)
~1.11lbs
(http://u.cubeupload.com/finland1/TXLBK095.jpg)

Aluminum core
(http://u.cubeupload.com/finland1/TXLBK0953.jpg)

Country of Origin
(http://u.cubeupload.com/finland1/TXLBK0952.jpg)
Title: Re: Chainsaw bar weights
Post by: Cut4fun . on April 17, 2020, 03:36:27 pm
I was curious how accurate Oregon was on their D025 3003 bar weight. Their site showed 4.8lbs. Well 32 050 3/8 105dl is right there. Weighed my D009 in same to by GB.

Title: Re: Chainsaw bar weights
Post by: Cut4fun . on May 09, 2020, 08:17:06 am
Never heard them say mount or gage

32 bars:
Sugihara - 4lbs 4oz
Tsumura - 3lbs 9.4oz
Cannon Duralite - 3lbs 10.5oz
Oregon Light - 3lbs 3.4oz
Oregon Power Match- 4lbs 11.2oz

28
Cannon Superbar - 3lbs 13.7oz
Stihl Oilomatic - 3lbs 14.3oz

https://youtu.be/9bhCg1UJbSc
Title: Re: Chainsaw bar weights
Post by: Cut4fun . on July 18, 2020, 05:32:42 pm
32" 063 stihl ES bar

Got 6 used in

Title: Re: Chainsaw bar weights
Post by: Cut4fun . on July 26, 2020, 11:10:40 am
New  laminated bar with replaceable sugi tips,  24 058  D009 mount.


Tsu light 24" 050  Weighed in ounces conversion  to 2lb 11oz
Jred oregon PM 058  Weighed in ounces
Poulan oregon PM 050  Weighed in ounces

Must have hit wrong setting on those 3 in past.


Title: Re: Chainsaw bar weights
Post by: Cut4fun . on November 06, 2020, 10:37:23 am
Bunch of chainsaw bar weights  https://pbase.com/wyk/unofficial_chainsaw_bar_weight_gallery

They are already posted in the chainsaw PHO and bar threads board here from back in Jan
Title: Re: Chainsaw bar weights
Post by: Cut4fun . on January 11, 2021, 03:09:54 pm
I'll weigh this Forester Platinum stihl mount 3/8 050 84DL in a bit.



Title: Re: Chainsaw bar weights
Post by: Cut4fun . on January 12, 2021, 08:10:20 am
I'll weigh this Forester Platinum stihl mount 3/8 050 84DL in a bit.

Lighter then the ES but heavier then PM

Pic



Title: Re: Chainsaw bar weights
Post by: Cut4fun . on June 03, 2021, 09:33:14 am
Stihl 880 large mount 3002 S2 etc. 36 063 123DL bar weight.

Title: Re: Chainsaw bar weights
Post by: Cut4fun . on June 06, 2021, 03:34:17 pm
Oregon E031 25" 3002 14mm weight



Title: Re: Chainsaw bar weights
Post by: Cut4fun . on June 26, 2021, 01:59:40 pm
Cannon Duralite superbar 28" stihl 3003

Title: Re: Chainsaw bar weights
Post by: Cut4fun . on February 12, 2022, 08:06:51 am
The new Husky bar in regular 28" that came on the 592.  3/8 93dl compared to a stihl light bar 28" 91dl

Title: Re: Chainsaw bar weights
Post by: Cut4fun on February 13, 2022, 06:51:17 am
28 powermatch 3/8 050 93dl D009

Chart with some others in 28 most which are stihl 91dl



Title: Re: Chainsaw bar weights
Post by: Cut4fun . on February 23, 2022, 12:46:11 pm
Couple more 24 bar weights.
Both new D009.
24 GB 3/8 063 84dl
24 Forester platinum 3/8 050 84dl

Title: Re: Chainsaw bar weights
Post by: Cut4fun on February 24, 2022, 07:47:37 am
Another guy using a fishing scale deal to hang his 2 new bars on. 3003 mount

20" ES 2.6 lbs for a regular 20 bar  =   2lbs 9.6oz

20" ES Light  1.8 lbs for a 20 light bar = 1lb 12.8oz