Chainsaw Repair
For Sale - Wanted - Trades - Swaps - Stolen - Recalls - Lost => Trades Swap Section => Topic started by: Cut4fun . on September 12, 2011, 11:03:04 am
-
There is a Poulan 4200 68cc and another craftsman chainsaw on CL's. Just in case someone might be interested here it is. 2 saws listed together for 1 price or he will separate it says.
http://akroncanton.craigslist.org/tls/2593038343.html
-
Poulan 306A 3300 3314 over 30mins one way from me. I'm not interested and just passing info on.
http://mansfield.craigslist.org/grd/2821383394.html
-
I'd be interested in that 3300 but it's probably 3 hours each way for me! >:(
Mike
-
says 80cc mac. http://columbus.craigslist.org/grd/2838892624.html
-
Hey wy8e check your email. Dolmar 120 looking in good shape http://mansfield.craigslist.org/tls/3011027032.html
-
I'd be interested in that 3300 but it's probably 3 hours each way for me! >:(
Mike
I never followed up on this because I know the guy that had bought the 3300 and 306 already. I was talking with him in email and he lives down there by the seller.
-
dolmar 115i alittle further drive. http://akroncanton.craigslist.org/grd/2981961068.html
-
I have a newer 111i and the only difference between the 111i and the 115 is the length of the bar
I was looking at the 120 in the CL ad and that is a nice one at a good price
-
I was looking at the 120 in the CL ad and that is a nice one at a good price
It's gone did you ::) :)
-
No, I didn't get it. The chainsaw was a nice old 60cc 120. It was not a 68cc 120Si. I was looking at it within 15 min of you sending me the link.
How did you come across that Dolmar? I did all sorts of searches on CL and pulled up everything else that guy had for sale but I could not pull up that chainsaw. Maybe by the time I got around to playing with the search engine last night, it was already sold
Was down at the son's house using the 365 Special cutting on a big tree all afternoon Saturday.
-
Just my normal CL searches. I think it went fast.
I was working on pull behind tiller and IH cub Sat and not having fun with it. Garden is about ready though after today.
-
Scrap prices. http://cleveland.craigslist.org/grd/3026025780.html
-
10 saws for 250 http://mansfield.craigslist.org/tls/3054753825.html
-
357xp looks nice in pics $250 http://akroncanton.craigslist.org/tls/3083284936.html
-
Good looking stihl 024 in Shelby http://mansfield.craigslist.org/tls/3077728196.html
-
1 owner 262xp. :o http://akroncanton.craigslist.org/grd/3090803125.html
-
I need to check out this stihl chainsaw ::) ;) one I have never seen before :P
http://mansfield.craigslist.org/for/3124969342.html
-
Made in China
$70-$80 ea plus shipping
http://www.aliexpress.com/wholesale/wholesale-chain-saw-5200.html
http://www.giobikes.com/Power-Snowblowers-in-Canada/GIO-Chain-Saw-52cc/
-
Yeah I was just joking around ;)
-
4 chainsaws at possibly scrap prices. http://akroncanton.craigslist.org/grd/3256018299.html
-
Homelite 600 http://mansfield.craigslist.org/grd/3344500479.html
-
What Mac model is this? Just says 1966 Mac
http://cleveland.craigslist.org/tls/3316078947.html
-
Looks like a faded 250?
-
Not sure trying to look at the second pic it seem s to show a muffler cover my 250s have just the muffler out ther on its own
-
As far as I know they never made a 250 with a muff cov or at least I've never seen one .I've got 4 or them myself from the early model that just has a stub spark arrester to a later model with the black air box cover that uses a standard round McCulloch muffler they used on many models .I'll check here later on if I can find that black cover model because it may have a long chain clutch/chain guard which would act like a muff cov .
-
For you guys into the older reed poulan 4200 saws. 2 bars etc 69cc it says. http://mansfield.craigslist.org/grd/3423340365.html
-
Say I did manage to find the black cover 250 but it took some digging .No long cover plus every 250 I found had a spark arrester ,several different styles .I'm missing one that I thought had a muffler but that might have been a super 250 .The IPL's ,several ,does not indicate a muff cov for that model
-
Poulan 6900 http://erie.craigslist.org/grd/3399780085.html
-
Got some free time and some wireless. ;D
Poulan 306 PHO $60
http://huntington.craigslist.org/grd/3416998153.html
-
Husky 365 $200
http://charlestonwv.craigslist.org/grd/3347668630.html
-
Looks like a Simington 451A
http://bend.craigslist.org/tls/3411916726.html
-
One I hadnt seen, different type of wright chainsaw http://columbus.craigslist.org/tls/3410062323.html
-
$25 poulan 3400 http://mansfield.craigslist.org/grd/3462663252.html
-
BIG Mall chainsaw http://mansfield.craigslist.org/for/3459856928.html
-
2 man Mac http://mansfield.craigslist.org/for/3459842261.html
-
A friend had one of those on a Dart Kart in 1959 and seems like it was geared 60:1. Another friend had a heavier Simplex with a MC-10 that had a huge sprocket on the live axle and a tiny one on the engine. it was like 80:1. I went around the road course using the MC-10. In three laps I had lapped the friend with the two man saw on his Dart Kart. Those old engines just did not run like the new engines in 1959. The Mac's didn[t have chromed cylinders back in those days. The MC-10 had the tower type reed plate and flared intake and exhaust.
The usual ratio for a 5 cube West Bend at the time was 72:1.
I hope I got all that right for it was 53 years ago.
I didn't have the money to play that game.
-
Kids toy chainsaw $5 http://mansfield.craigslist.org/tag/3452277598.html
-
Clinton D35 http://akroncanton.craigslist.org/grd/3453384842.html
-
PIONEER P40
http://columbus.craigslist.org/grd/3472977163.html
-
stihl 064
http://mansfield.craigslist.org/tls/3463733565.html
-
Husqvarna 288xp lite $100 needs rebuilt.
http://akroncanton.craigslist.org/tls/3472056307.html
-
Husqvarna 288xp lite $100 needs rebuilt.
http://akroncanton.craigslist.org/tls/3472056307.html
I'd buy that if I was closer.
-
288 is over 3 hr round trip is why I'm not messing with it.
Husqvarna 575 $300 http://columbus.craigslist.org/grd/3470543888.html
-
Tim Allen TA Poulan 3750 $75 http://akroncanton.craigslist.org/tls/3470884067.html
-
Poulan 245 245SA $25 http://akroncanton.craigslist.org/grd/3473588624.html
-
poulan 25da http://akroncanton.craigslist.org/tls/3435552845.html
-
poulan 3400 $75 http://akroncanton.craigslist.org/grd/3418365838.html
-
PIONEER 1074
http://sandusky.craigslist.org/grd/3476320755.html
-
Lombard $50
http://columbus.craigslist.org/tls/3480954428.html
-
Homelite 240 http://mansfield.craigslist.org/tls/3483919882.html
-
Echo 602 and 702 http://mansfield.craigslist.org/tls/3483332120.html
-
Husqvarna 141 = Poulan http://columbus.craigslist.org/grd/3484549513.html
-
Poulan 3300 http://columbus.craigslist.org/tls/3427179601.html
-
Orange poulan call and find out might be a prize. http://columbus.craigslist.org/grd/3480980111.html
-
yellow sears craftsman poulan with powersharp http://columbus.craigslist.org/tls/3407309880.html
-
This is a new one on me. You put a AFM big bore cylinder on a 660 and it transforms ::)
This is a former MS660 that I purchased with a bad cylinder. I replaces the piston and cylinder with a 2mm overbore so now it is a MS880.
http://columbus.craigslist.org/grd/3486840213.html
-
A 660 with a 2mm overbore cylinder (54mm > 56mm) is only 98.5cc and the 880 is 120cc
From Bailey's . . .
Stihl 066*, MS 650*, MS 660*
Replaces Part Number 1122 020 1211
Bore 56mm
Stroke 40mm
Displacement 98.5cc
Rings 56mm x 1.2mm
Sounds like he is carrying a heavy load in the seat of his pants?
-
Craftsman 2.7a VL = echo 451 I think. $35
http://mansfield.craigslist.org/for/3487123375.html
-
A 660 with a 2mm overbore cylinder (54mm > 56mm) is only 98.5cc and the 880 is 120cc
Sounds like he is carrying a heavy load in the seat of his pants?
880 is almost 122cc DISPLACEMENT 121.6 cc (7.42 cu. in.) I sent a email asking where the other 24cc came from to take a 2mm BB 660 to a 880. ;)
-
A 660 with a 2mm overbore cylinder (54mm > 56mm) is only 98.5cc and the 880 is 120cc
Sounds like he is carrying a heavy load in the seat of his pants?
880 is almost 122cc DISPLACEMENT 121.6 cc (7.42 cu. in.) I sent a email asking where the other 24cc came from to take a 2mm BB 660 to a 880. ;)
Cant wait for his reply ;)
-
A 660 with a 2mm overbore cylinder (54mm > 56mm) is only 98.5cc and the 880 is 120cc
Sounds like he is carrying a heavy load in the seat of his pants?
880 is almost 122cc DISPLACEMENT 121.6 cc (7.42 cu. in.) I sent a email asking where the other 24cc came from to take a 2mm BB 660 to a 880. ;)
Cant wait for his reply ;)
Tried 3 times. LOL none.
-
weedeater and older chainsaws http://mansfield.craigslist.org/grd/3450788408.html
-
stihl lighter http://columbus.craigslist.org/clt/3494295226.html crazy price
-
Dolmar 309 concrete saw. I'm not sure but think same motor as Dolmar 123. Please correct me if I'm wrong.
http://sandusky.craigslist.org/grq/3476222435.html
-
I do know that the Dolmar 309 has an ignition that will work in the Dolmar 119, but I do not know about the 123.
-
I do drive this direction often if I was needed. Poulan micro XXV http://mansfield.craigslist.org/grd/3482683293.html
-
Wow, the little beast looks almost new. That was one of the best mini saws on the market at the time.
-
echo 900 900evl http://cleveland.craigslist.org/tls/3515810477.html
-
Another poulan 4200 in WI http://greenbay.craigslist.org/grq/3520108868.html
-
Anyone know what it is? http://columbus.craigslist.org/grd/3547612807.html
1st $50
-
Wright chainsaw http://columbus.craigslist.org/tls/3538012106.html
-
Sears old chainsaw http://zanesville.craigslist.org/grq/3520177365.html
-
Anyone know what it is? http://columbus.craigslist.org/grd/3547612807.html
1st $50
It looks like a Mall 2MG, probably worth $50.00, or maybe not, based on feePay completed listings. http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/c1150a3d6b394c2988256d43001abded?OpenDocument
It might be rebadged?? as Remington?? I can't quite make out the label even using 400% zoom, but it doesn't appear to read Mall.
-
Poulan 4900 http://spokane.craigslist.org/tls/3548504920.html
-
Poulan 5400 http://spokane.craigslist.org/tls/3548503328.html
-
Another poulan 5400 with 36 bar http://columbia.craigslist.org/grd/3475847410.html
-
Big older looking Homelite chainsaw http://columbus.craigslist.org/grd/3502822658.html
-
Poulan 245A 3400-3700 and 2 others for $100 http://akroncanton.craigslist.org/tls/3568249671.html
-
Don't know how to paste a link on my phone but southeast ks cl jonsered 2094 $450 &a 920"hotsaw" $300 .don't know if these are good prices or not
-
Here's the link to the CL listing
http://seks.craigslist.org/grd/3542276502.html
-
Hey Roger a different poulan predator to go with the red collection. ;) :D
http://mansfield.craigslist.org/for/3629922838.html
-
Hey Roger a different poulan predator to go with the red collection. ;) :D
http://mansfield.craigslist.org/for/3629922838.html
Orange and green that is different. Sorry it has to be a 335 predator. Oh well.
-
Hey Roger a different poulan predator to go with the red collection. ;) :D
http://mansfield.craigslist.org/for/3629922838.html
Orange and green that is different. Sorry it has to be a 335 predator. Oh well.
Thats why I added the laughing smiley. I knew the word predator would reel you in. ;)
-
poulan 3400 $75 http://cleveland.craigslist.org/grd/3621624187.html
-
poulan 295 $30 PHO http://cleveland.craigslist.org/grd/3595285855.html
-
Poulan 2900 2.8 $55 http://cleveland.craigslist.org/tls/3548253521.html
-
Poulan 4000 $165 http://akroncanton.craigslist.org/grd/3607750369.html
-
Mcculloch 200 1963 80cc http://columbus.craigslist.org/tls/3640043617.html
-
Look like old Homelite saws 770G and Wiz http://cleveland.craigslist.org/grd/3645741976.html
-
Poulan (says xxv) with green case runner $30 http://cleveland.craigslist.org/for/3651000775.html
-
vintage chainsaws http://cleveland.craigslist.org/grd/3651412092.html
-
The red one looks like a Homelite xl-12 and I believe the other is a Mac 15 .
-
Found a Poulan Pro Super 380 for $200. I dont want it soooooooooooo. ;)
-
Solo Twin for sale in UK. Best offer. Has pic of 1 and says there is 2 more
-
McCulloch 200 80cc $125
http://columbus.craigslist.org/grd/3671671315.html
-
All 3 for $40. Wright chainsaw = poulan XX 20 http://columbus.craigslist.org/grd/3688461063.html
-
All 3 for $40. Wright chainsaw = poulan XX 20 http://columbus.craigslist.org/grd/3688461063.html
Well those did not last very long.
-
I feel I gave the guy ample time. Poulan 4000 for $165 http://akroncanton.craigslist.org/grd/3607750369.html
-
poulan pro 5020 $155 http://akroncanton.craigslist.org/grd/3672103934.html
-
Has anyone snagged that 4000 yet?
-
Ready set go. Better beat Fastleo to it. Wizard 110 = poulan and craftsman = poulan 3400 3700 3800 maybe. http://columbus.craigslist.org/for/3699793422.html
-
$50 for all 3 stihl 029 super 026 and 192 or 191 ?? http://cleveland.craigslist.org/grd/3699807466.html
-
I know where there is a Dayton poulan 3400 3700 ???? parts saw for $15 and shipping. Dayton model # ?
-
That poor thing looks like it went through the ringer. :(
-
Near my house a couple days ago, there was a CL posting for a Stihl 361 for $250.
It was only there for 2 or 3 hrs.
-
Wizard and Craftsman chainsaws = Poulan chainsaws for $50 with extras. http://columbus.craigslist.org/tls/3725971792.html
-
$25 for a stihl 018 http://columbus.craigslist.org/grq/3772723476.html
stihl 180
-
Montgomery Wards Chainsaw $40. Whats up with the handle?
http://sandusky.craigslist.org/tls/3775908271.html
-
66" 2 man bar $150 http://columbus.craigslist.org/for/3790150898.html
66 inch bar and chain, came off of a stihl chainsaw, can be used for milling or 2 man sawing, bar and chain are in good shape, chain is sharp, has handle roller on one end, $150 may take trade call
-
Wen Lumberjack chainsaw http://columbus.craigslist.org/tls/3764586316.html
-
For you guys collecting these. Here is a skilsaw colored poulan http://mansfield.craigslist.org/bar/3807166574.html skil saw chainsaw
-
jonsered 2159 $225 http://mansfield.craigslist.org/tls/3811969454.html
-
Poulan 3450 $75 http://columbus.craigslist.org/grd/3847152902.html
-
Mall Model 10 2 man Chainsaw http://columbus.craigslist.org/tls/3856090476.html
-
Years ago at about 1 out of every 4 farm auctions they had some model of Mall saw for sale which usually went very cheap .Ignition coils would go bad on those things .That fact plus almost impossible to find a replacement chain plus the fact they were slow as a snail and weighed a ton was why they were banished to the barn .
I will say though they were built like battle ships .Unless straight gassed on I doubt you could wear one out in two life times .
-
If you like them big and heavy. Stihl 090 http://mansfield.craigslist.org/tls/3874669358.html
-
???I found this Stihl 090 on CraigsList! :o It is listed for $1800. Says its all original. Comes with extras, too. Seems to be cherry!! Seems a little high price to me? What do you guys think? Thanks! http://portland.craigslist.org/wsc/grd/3887987059.html (http://)
-
Been watching this for a month now. Prices have really dropped too. $30 a saw or take it all $895 200 + chainsaws for parts or repair Stihl Mcculloch Homelite Pioneer - $895 (newark, ohio 43055) http://columbus.craigslist.org/grd/3947775456.html
Selling over 200 vintage chainsaws for parts or repair. Stihl, McCulloch, Pioneer, Homelite, Echo, Poulan, etc.
Need to clear out the garage. Will sell individual saws or parts. 2 Maxx professional chain grinders and 1 Oregon. Rolls of new chain, new sprockets for all types of saws. I also have shop manuals and parts manuals for Stihl, McCulloch, Homelite, etc. I am also selling a Metal Lathe, valve grinding machine, tig/stick welder, and Snap on bore scope. If your looking for a bargain to sell stuff on ebay, this is it. I also have some antique tools, pullers, wrenches, very old automobile jacks, etc. Come take a look, load up your truck.
Phone calls only, from 7am to 10pm
740-364-nine four nine four
Asking $895.00 for all of the saws, reduced from $1200.00, first come first serve, will sell for $30.00 each saw.
-
husqvarna 2100 http://mansfield.craigslist.org/tls/3977610172.html
was a stihl 362 for $200 too. Yep I passed on it. Just because I am in control and didnt need it, nor to buy and just flip.
-
husqvarna 2100 http://mansfield.craigslist.org/tls/3977610172.html
was a stihl 362 for $200 too. Yep I passed on it. Just because I am in control and didnt need it, nor to buy and just flip.
That is only because you have been there and done that so many times you cannot count them all.
-
stihl 076 super http://columbus.craigslist.org/tls/3978097984.html
-
husqvarna 2100 http://mansfield.craigslist.org/tls/3977610172.html
was a stihl 362 for $200 too. Yep I passed on it. Just because I am in control and didnt need it, nor to buy and just flip.
That is only because you have been there and done that so many times you cannot count them all.
So true, been there done that for sure LOL.
-
stihl 090 http://columbus.craigslist.org/grd/3979747514.html
-
Fairborn is on the east edge of Dayton on the East side of Wright-Patterson AFB where Wright State University is.
-
husqvarna 281xp $200 http://mansfield.craigslist.org/grd/4009702062.html
-
Not a bad deal but I have a hard time sending a complete stranger money with no re-course if they decide to rip you off. I know people do it and get some good deals, but I am just not that trusting.
-
craftsman 20" $50 maybe version of poulan 295 4620 http://mansfield.craigslist.org/for/4022598718.html
-
poulan 4620 $100 http://akroncanton.craigslist.org/grd/4018603600.html
-
good looking poulan 295 for $20 http://cleveland.craigslist.org/grd/4056291070.html
-
$75 Mac I cant make out # http://akroncanton.craigslist.org/grd/4035305477.html
-
I might be a 700 and that would be a good price .
-
I blew up the picture and as near as I can tell it's a pro mac 555 made only two years ,It's 3.5 cubic inchs or the same as a 10-10 super .In other words it's basically a souped up 10-10 .For the price though it would make an inexpensive firewood cutter .
-
I believe that Mac is a 655 and a nice one too.
-
I might be a 700 and that would be a good price .
Owner sent email back 555
-
Yep you were right Al. You posted while I was typing.
I was thinking 655 also cowroy.
-
The 655 is one variation of the PM 610.
-
Sorry I had a brain fart on this one. A 655 is in the family that looks like the timber bear and I can't believe I said it ::)
-
I dont know macs but it looked like 655 numbers to me on top. 555 655 all looked the same numbers wise that small
-
Poulan Craftsman looks like a AV version? http://cleveland.craigslist.org/tls/4064056631.html
-
poulan xx http://toledo.craigslist.org/tls/4050833656.html
-
Wright chainsaw I was wondering what it was in thread. http://columbus.craigslist.org/tls/4045133989.html
-
Poulan 76 Bicentennial. http://akroncanton.craigslist.org/grd/4063283378.html
-
http://newhaven.craigslist.org/grd/4086533392.html (http://newhaven.craigslist.org/grd/4086533392.html)
-
2 macs maybe 35 http://mansfield.craigslist.org/for/4055108707.html
-
poulan xx 20 http://toledo.craigslist.org/tls/4050833656.html
-
poulan 76 bicentennial http://akroncanton.craigslist.org/grd/4063283378.html
-
husqvarna 2100 http://mansfield.craigslist.org/tls/4094122214.html
-
husqvarna 390xp $400 http://tuscarawas.craigslist.org/grd/4095726813.html
-
jonsered 2065 $250 http://columbus.craigslist.org/tls/4078323996.html
-
stihl 036 $300 http://columbus.craigslist.org/grd/4094666053.html
-
husqvarna 350 $150 http://mansfield.craigslist.org/tls/4095748701.html
-
dayton chainsaw $60 poulan 306 maybe http://mansfield.craigslist.org/grd/4075683644.html
-
$10 poulan 2000 http://limaohio.craigslist.org/grd/4085307692.html
-
Poulan 4400 with bow in GA http://columbusga.craigslist.org/grd/4041429875.html (http://columbusga.craigslist.org/grd/4041429875.html)
-
not craigslist, but better ;)
http://ontario.kijiji.ca/c-buy-and-sell-art-collectibles-ANTIQUE-MCCULLOCH-CHAIN-SAW-W0QQAdIdZ527721299
-
nice looking poulan 3400 http://akroncanton.craigslist.org/grd/4097413207.html
-
David Bradley chainsaw http://mansfield.craigslist.org/grd/4096602692.html
-
2 man chainsaw mall saw http://toledo.craigslist.org/grd/4060739062.html
-
maybe the absolute diehard collector would pay. not me but somebody might:
http://ontario.kijiji.ca/c-buy-and-sell-art-collectibles-Antique-2-person-mcCulloch-chain-saw-W0QQAdIdZ523899787
-
Root chainsaw http://akroncanton.craigslist.org/tls/4093573318.html
-
poulan S25DA or S250A ;) :D $35 http://mansfield.craigslist.org/grd/4130927917.html
-
lombard chainsaw $30 http://mansfield.craigslist.org/grd/4125856266.html
-
Anybody in northeast Indiana want a McCulloch Eager Beaver Mini Mac for $90 :o
http://fortwayne.craigslist.org/tls/4126827414.html
-
McCulloch 33 $40 Mac 33 http://sandusky.craigslist.org/for/4095829853.html
-
Not sure if that is a $40 chain and a $75 saw or what?
It is about 15 minutes from me if somebody really wants it, I can go pick it up for them.
Chuck
-
Mall 2mg chainsaw http://limaohio.craigslist.org/grd/4155025275.html
-
Not happening.
http://fortwayne.craigslist.org/atq/4157681647.html
-
Havent seen this one before. 1943 Clinton chainsaw D2B http://zanesville.craigslist.org/grd/4168224707.html
-
Another stihl 200T http://akroncanton.craigslist.org/grd/4140288648.html
-
Havent seen this one before. 1943 Clinton chainsaw D2B http://zanesville.craigslist.org/grd/4168224707.html
Where the hell do these idiots find their 'year of manufacture' info? 1943? Yeah right. More like 1963. Seen that kind of stupidity many times. If a saw looks 'old', then the seller will pull some arbitrary year out of their ass (guess that's where they get their 'info'). They always state it as absolute fact (never "I think this may be from the 1960's"). I've seen 1950's saws labeled as "1930's", 1960's saws labeled as "1940's", and 1970's saws labeled as "early 50's"....
-
Havent seen this one before. 1943 Clinton chainsaw D2B http://zanesville.craigslist.org/grd/4168224707.html
Where the hell do these idiots find their 'year of manufacture' info? 1943? Yeah right. More like 1963. Seen that kind of stupidity many times. If a saw looks 'old', then the seller will pull some arbitrary year out of their ass (guess that's where they get their 'info'). They always state it as absolute fact (never "I think this may be from the 1960's"). I've seen 1950's saws labeled as "1930's", 1960's saws labeled as "1940's", and 1970's saws labeled as "early 50's"....
That drives me flippin' nuts.
-
Havent seen this one before. 1943 Clinton chainsaw D2B http://zanesville.craigslist.org/grd/4168224707.html
Where the hell do these idiots find their 'year of manufacture' info? 1943? Yeah right. More like 1963. Seen that kind of stupidity many times. If a saw looks 'old', then the seller will pull some arbitrary year out of their ass (guess that's where they get their 'info'). They always state it as absolute fact (never "I think this may be from the 1960's"). I've seen 1950's saws labeled as "1930's", 1960's saws labeled as "1940's", and 1970's saws labeled as "early 50's"....
That drives me flippin' nuts.
Same here. I have no problem with those folks not knowing when the saw was made. What irritates me is when they make a freakin' wild ass guess and state it as fact.
-
1955 - 1958 4.43ci 73.4cc 4,000 rpm in the cut? Will sound like it is just above idle?
http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/3af86afceb7d68ac88256cbf00114971?OpenDocument
-
1955 - 1958 4.43ci 73.4cc 4,000 rpm in the cut? Will sound like it is just above idle?
http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/3af86afceb7d68ac88256cbf00114971?OpenDocument
Yep. They are low RPM growlers. EXTREMELY loud too. The Bolens Thrifty 3010 that I'm working on is very similar to that saw, and has an open 'muffler' that really doesn't muffle things at all. A fellow can see right into the cylinder when looking down the throat of that 'muffler'. It directs the noise away from the operator, and towards whoever is standing to the front/right. I had that saw running next to my shop, and got a blast of noise whenever the 'muffler' was pointed at the shop wall.
http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/d4245318714c4bda88256b38006b46bd?OpenDocument
(http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/d4245318714c4bda88256b38006b46bd/Images/0.84?OpenElement&FieldElemFormat=gif)
-
So is it rare? ;) RARE Vintage David Bradley Electric Chainsaw 353.88160 $100 http://akroncanton.craigslist.org/tld/4136854849.html
-
So is it rare? ;) RARE Vintage David Bradley Electric Chainsaw 353.88160 $100 http://akroncanton.craigslist.org/tld/4136854849.html
I can't imagine that all that many of those were sold.................or still exist today.:D
-
There is a 140 not 160 like on CL listed, on ebay out your way in Calif. http://www.ebay.com/itm/Rare-Vintage-David-Bradley-Sears-Electric-Chainsaw-353-88140-/111206912756
-
Interesting. Temecula is in southern California.
-
Calif CL Lombard chainsaw http://sfbay.craigslist.org/eby/tls/4174688806.html
-
Calif CL Lombard chainsaw http://sfbay.craigslist.org/eby/tls/4174688806.html
Yeah I've been eyeballing that one. Close to 3 hours one-way drive however....
-
Wish fastleo or pogo would pick this poulan pro 285 up so I would quit eying it.
Poulan 285 PP285 $90 http://akroncanton.craigslist.org/grd/4197350237.html
-
JJ,
Thanks for the link and getting me to your site.
I think the PP285 is calling you....
-
JJ,
Thanks for the link and getting me to your site.
I think the PP285 is calling you....
Dang that was fast. Welcome 8) I go by cut4fun here and every where else, just jj there. ;)
LOL I've learned to just say no to the that evil guy on my right shoulder whispering you need it.
-
JJ,
Thanks for the link and getting me to your site.
I think the PP285 is calling you....
Dang that was fast. Welcome 8)
LOL I've learned to just say no to the that evil guy on my right shoulder whispering you need it.
I have not learned that yet.
-
I'd like to have a fire sale and get down to 4-5 saws myself. All my cutting areas are drying up here. Just lost around a 600-700 acres I used to cut on with a friend for firewood for him an test sticks for me. All the land sold and broke up.
Do have some monsters to drop down south on my land though. Maybe next spring.
-
I'd like to have a fire sale and get down to 4-5 saws myself. All my cutting areas are drying up here. Just lost around a 600-700 acres I used to cut on with a friend for firewood for him an test sticks for me. All the land sold and broke up.
Do have some monsters to drop down south on my land though. Maybe next spring.
Better keep the 505 wild thing around.
-
pass jonsered 2095 to much IMO, but someone out there may like them. http://akroncanton.craigslist.org/for/4197584500.html
-
Found these on C/L Lima/Findlay.
Which one should I buy?
(http://images.craigslist.org/00R0R_22nVMkaTsH8_600x450.jpg)
(http://images.craigslist.org/00T0T_dniYPZpWUT4_600x450.jpg)
460 Husky--$180
2165 Jonsered--$150
-
2165 Jonsered, by a country mile.
-
pass on the husky 460, take the 2165. There is a 2065 down in Chill........... for $200 or BO. Tried to tell folks when I was down south of there.
-
Chillicothe, Ohio
-
Thanks guys.
My Husky bars will fit the 2165, correct?
-
Large husky mount like your 372 394, NOT the small mount 346
-
pass jonsered 2095 to much IMO, but someone out there may like them. http://akroncanton.craigslist.org/for/4197584500.html
That's not too bad on it really. If the p/c is good and muffler isn't rusted too bad.
-
Thanks guys.
So what did you get?
I still got that John Deere 800V (your name is on it :D ) with 195psi if you want to take a test spin. Bring a longer bar 36 or so, because all I got is 24's.
-
So what did you get?
I still got that John Deere 800V (your name is on it :D ) with 195psi if you want to take a test spin. Bring a longer bar 36 or so, because all I got is 24's.
Going to look Sunday.
You leave my name on that 800V.
I will have to buy a long bar that will fit a JD.
Chuck
-
So what did you get?
I still got that John Deere 800V (your name is on it :D ) with 195psi if you want to take a test spin. Bring a longer bar 36 or so, because all I got is 24's.
Going to look Sunday.
You leave my name on that 800V.
I will have to buy a long bar that will fit a JD.
Chuck
No need to do that. Large husky mount is all I use on it. ;)
-
Putting it here for you guys 1st. http://akroncanton.craigslist.org/grd/4222501948.html
-
Wow that's freakin' sweet. Already spent my saw $$$ for the month....................otherwise I'd at least grab the new 380 top end. Check out the $199.99 TSC price sticker on the box. MAN I wish I'd gotten one of those when TSC had those for sale a few years ago.
(http://images.craigslist.org/00t0t_2GDXC1ad0Bi_600x450.jpg)
-
Had an appointment for this morning to go check out the 2165.
Called this morning to let him know I was on my way.
He had sold it.
SOB
I know that C/L and classifieds are first come, first $$ gets the item,
but he had told me Sunday was the first time he would be available to show it.
Guess it is all for the best.
-
That suks. But my belief is everything happens for a reason. Even if I dont understand sometimes why and question it. Still what I believe.
-
;D
-
http://limaohio.craigslist.org/tls/4265274935.html (http://limaohio.craigslist.org/tls/4265274935.html)
Mcculloch 1-82 Vintage chainsaw - $400 (Cloverdale)
Info from http://www.acresinternet.com/
YEAR INTRODUCED: 1961
YEAR DISCONTINUED:1962
ENGINE DISPLACEMENT: 5.3 cu. in.(87cc)
NUMBER OF CYLINDERS: 1
CYLINDER BORE: 2.125 in. (54mm)
PISTON STROKE: 1.500 in. (38mm)
CYLINDER TYPE: Aluminum with cast iron sleeve
INTAKE METHOD: Reed valves with third port induction system
MANUFACTURER ADVERTISED H.P.: not advertised
WEIGHT : 24 lbs. (10.8 kg) powerhead only
-
400 bucks for an old Mac ??? Lawdy I must be sitting on 10 thou then by that price . ;D
-
Yeah he's in left field by a factor of 4 at least...
-
Says 2 80cc JD for $250 for pair. John Deere Echo Chainsaws http://columbus.craigslist.org/grd/4263673610.html
-
http://littlerock.craigslist.org/grd/4292602342.html
Would this be a good saw to give me some 'practice repairing' on?
Is the price good, bad or 'other'?
I have a compression gauge, is it 'out of line' to request it be hooked up before purchasing a used saw that is advertised with compression issues?
One last question...what is the compression supposed to be on this saw?
Scott (need something to break) B
-
http://littlerock.craigslist.org/grd/4292602342.html
Would this be a good saw to give me some 'practice repairing' on?
Is the price good, bad or 'other'?
I have a compression gauge, is it 'out of line' to request it be hooked up before purchasing a used saw that is advertised with compression issues?
One last question...what is the compression supposed to be on this saw?
Scott (need something to break) B
A running 350 in intact, decent condition is a $200 saw around here.
Nope, not out of line to do a compression check. The seller said 'feels like' it had issues, he never did an actual check. Different saws 'feel' different. IIRC, the 350 I had was around 150 -155 or so ...
-
http://littlerock.craigslist.org/grd/4292602342.html
Would this be a good saw to give me some 'practice repairing' on?
Is the price good, bad or 'other'?
I have a compression gauge, is it 'out of line' to request it be hooked up before purchasing a used saw that is advertised with compression issues?
One last question...what is the compression supposed to be on this saw?
Scott (need something to break) B
A running 350 in intact, decent condition is a $200 saw around here.
Nope, not out of line to do a compression check. The seller said 'feels like' it had issues, he never did an actual check. Different saws 'feel' different. IIRC, the 350 I had was around 150 -155 or so ...
Thanks for the fast response...I'll give the fella another 30minutes of sleep and try to set-up a time to go see it. It was just listed the other day....we'll see?
I'd rather 'learn something' on a saw that didn't cost me a LOT more....
Scott (think there's a video on this one too) B
-
I've passed up several good looking runners for 100-150. Just saying, non runner less. 50-75 at max IMO
-
I've passed up several good looking runners for 100-150. Just saying, non runner less. 50-75 at max IMO
Looks like a 'pass' on this one for me. Fella doesn't want to talk to me, brings my 'stranger danger' meter WAY UP!
I'll keep looking.....
Scott (I got a weird meter) B
-
That's a 44mm bore 350?
-
That's a 44mm bore 350?
That would affect the price as well. Would have to check to see which p/c it has. Could have either. It doesn't have a purge bulb, so it's an older saw. There were 'pre-bulb' 45mm 350's though. The 2003 45mm 350 I had didn't have a purge bulb.
See the mung under the clutch cover? Looks like he was cutting RR ties. Low compression on these saws can be an indication of a smoked P/C (which is very possible given the failure prone plastic boot clamps on the older saws). If the top end is dead then I wouldn't pay more than $40-$50 (at most) for it. Gotta figure in $100+ for an aftermarket top-end.
(http://images.craigslist.org/00r0r_ii5EO2TuMRx_600x450.jpg)
(http://images.craigslist.org/00V0V_lA4iwwyeW0M_600x450.jpg)
-
That's a 44mm bore 350?
That would affect the price as well. Would have to check to see which p/c it has. Could have either. It doesn't have a purge bulb, so it's an older saw. There were 'pre-bulb' 45mm 350's though. The 2003 45mm 350 I had didn't have a purge bulb.
See the mung under the clutch cover? Looks like he was cutting RR ties. Low compression on these saws can be an indication of a smoked P/C (which is very possible given the failure prone plastic boot clamps on the older saws). If the top end is dead then I wouldn't pay more than $40-$50 (at most) for it. Gotta figure in $100+ for an aftermarket top-end.
(http://images.craigslist.org/00r0r_ii5EO2TuMRx_600x450.jpg)
(http://images.craigslist.org/00V0V_lA4iwwyeW0M_600x450.jpg)
Seems someone thinks its worth $66 plus shipping so far, it made it to FleaBay: >>>> Link <<<< (http://www.ebay.com/itm/Husqvarna-350-Chainsaw-for-Parts-or-Repair-Good-Shape-/321303389382?pt=US_Chainsaws&hash=item4acf2ca4c6)
Scott (glad I passed) B
-
Heck it might bring more then new there LOL. IMO feebay isnt realistic for local pricing.
Seen some crazy stuff there.
-
Definitely....Did see a really clean Stihl 041AV there, but it's already gone past what I would be willing to go after it for. Then again, it's clean enough to be considered 'collection worthy'.....I'm more of a 'I will clean it later guy' ;D
Still looking for a decent "practice-on-it-before-I-FUBAR-it-saw" to do my first build on though.
If anyone has a good candidate...I'm all ears(so to say)!!!
Scott (what's the easiest to do a build) B
-
ouch echo 900evl http://mansfield.craigslist.org/grd/4312723678.html
-
JJ,
Thanks for the link and getting me to your site.
I think the PP285 is calling you....
Dang that was fast. Welcome 8) I go by cut4fun here and every where else, just jj there. ;)
LOL I've learned to just say no to the that evil guy on my right shoulder whispering you need it.
OK, so now I'm REALLY CONFUSED, who is jacob j, jj and all the other permutations? Are they all the same person?
-
ouch echo 900evl http://mansfield.craigslist.org/grd/4312723678.html
... with a busted brake flag, no less.
I guess local mods can get expensive!
-
JJ,
Thanks for the link and getting me to your site.
I think the PP285 is calling you....
Dang that was fast. Welcome 8) I go by cut4fun here and every where else, just jj there. ;)
LOL I've learned to just say no to the that evil guy on my right shoulder whispering you need it.
OK, so now I'm REALLY CONFUSED, who is jacob j, jj and all the other permutations? Are they all the same person?
It's OK to be confused. 2 different people. JJ and jj
-
I did some searching and found that that 090 deal was a scam. Turns out the same saw in pic was sold in Calif. I have removed all my post on such 090 now. Freaking scammers.
-
Hmmmmm ??? Just in case be careful. 281xp $40 395xp $50 http://columbus.craigslist.org/for/4333181678.html
-
How close are you to that Kevin? I would gladly pay those prices for those.
-
Thats why I didnt go look, about 1.5hrs one way.
-
Man if that ad was local to me I'd be on the road now..........................armed (always) and possibly with a buddy. That's in the "too good to be true" category..........especially the 'running' 395XP.
-
SOLD - not to me.
-
Man if that ad was local to me I'd be on the road now..........................armed (always) and possibly with a buddy. That's in the "too good to be true" category..........especially the 'running' 395XP.
Years ago I would have too. Now I just aint into the travel at all.
Put it this way, I have a hard time making myself go look at saws 30mins away. Most times I just say pfft and let the want go. The fire just isn't there anymore to chase chainsaws.
Just like there is a good looking NE 338xpt for $195 45mins away. Think he said or BO even. Just wont drive to check out.
-
There is a big JD right down the road from you, I think.
http://limaohio.craigslist.org/grd/4331172354.html (http://limaohio.craigslist.org/grd/4331172354.html)
-
Seen that yesterday. Way to much IMO.
Plus there was another last week I turned down just like it for $125.
-
Man if that ad was local to me I'd be on the road now..........................armed (always) and possibly with a buddy. That's in the "too good to be true" category..........especially the 'running' 395XP.
Years ago I would have too. Now I just aint into the travel at all.
Put it this way, I have a hard time making myself go look at saws 30mins away. Most times I just say pfft and let the want go. The fire just isn't there anymore to chase chainsaws.
Just like there is a good looking NE 338xpt for $195 45mins away. Think he said or BO even. Just wont drive to check out.
I just got back from a 3 hr round trip that was supposed to net some goodies for me and some serious trade bait for another saw guy. Unfortunately, the seller sold all the good stuff to a local tree guy the day before the 'official' sale. Just the crumbs left from what would have been a good Husky score.....:(
In other news, I did pick up something nice (small, but nice) from the same sale that you may be interested in Kevin. I'll look closer at it and shoot a few pics. Either you'll end up with it or I will......
-
poulan xxv micro deluxe $20 http://cleveland.craigslist.org/tls/4335873339.html
-
Guy near Dayton, OH has a 400-500 Stihl chains for sale, used once, never sharpened.
http://dayton.craigslist.org/grd/4339184907.html (http://dayton.craigslist.org/grd/4339184907.html)
We have .050 guage, 3/8 chains in the following lengths 36" $9/each or fifteen for $100
and 24" (25" depending who you ask) $6/each or fifteen for $75
12" pole saw chains $4/each or ten for $30
14" trim saw chains $5/each or ten for $40
14-18" "farm boss" chains $5/each or ten for 40
-
This wright chainsaw has been for sale for a long time now. Just in case someone is looking. $90 http://columbus.craigslist.org/tls/4341739182.html
-
Stihl 020AV in Cincinnati for $50
http://cincinnati.craigslist.org/tls/4342476264.html (http://cincinnati.craigslist.org/tls/4342476264.html)
Small stihl chainsaw has good compression. Can't get it to start. $50
-
Found this pellet stove on CL
Never seen anything like it, but then, I have not been around much.
http://dayton.craigslist.org/hsd/4318575618.html (http://dayton.craigslist.org/hsd/4318575618.html)
-
Found this pellet stove on CL
Never seen anything like it, but then, I have not been around much.
http://dayton.craigslist.org/hsd/4318575618.html (http://dayton.craigslist.org/hsd/4318575618.html)
Interesting, never seen anything like it. But I dont get out much either.
-
Opinions please?
Too much? Not enough?
http://littlerock.craigslist.org/tls/4363850750.html
This is my ad, I'd like to be 'fair', but I don't want to give it away either. So I ask those here to give some advice....(not looking to hear about "I buy junk saws all the time like this for $25'-this isn't junk).
Scott (respectfully needing a lobotomy) B
-
I've never followed the market on the stihl 056 to know. Just so you know I wasnt ignoring giving you my opinion on price.
-
I've never followed the market on the stihl 056 to know. Just so you know I wasnt ignoring giving you my opinion on price.
Fair enough....I do realize it's more of a location thing sometimes, but I'd rather not have to deal with shipping at this point(so my market is quite reduced).
Scott (I still need a lobotomy) B
-
Sold my 056 super via craigslist for 400 year. 28" bar/chain included
-
There are several on ebay for sale.
If it were a 056 Magnum, that might be a good price.
If it included the b/c, it might be a good price.
As it stands, PHO, I would wait a few days to see if his price will come down or he will include the b/c
If somebody else grabs it up at that price, you will have saved yourself some bucks.
There will always be another saw, another day, better price.
IMHO
-
There are several on ebay for sale.
If it were a 056 Magnum, that might be a good price.
If it included the b/c, it might be a good price.
As it stands, PHO, I would wait a few days to see if his price will come down or he will include the b/c
If somebody else grabs it up at that price, you will have saved yourself some bucks.
There will always be another saw, another day, better price.
IMHO
It is listed on eBay also....
If it were a Magnum, I would have listed it at $650....
I can include bar/chain for additional....
If it doesn't sell, I will put it back 'somewhere' and list it later on....
If someone grabs it at that price, I'd be able to buy new toys....
I have other saws not list....yet
If it were a 'junker/rebuild', I would have probably liked this one a little more. Having a non-runner is something I need in order to 'learn on'. As it stands though, it runs far too well for me to rip open just to 'play'.
Scott (I do appreciate the thoughts though) B
-
I'd say feebay will bring more money. But you will pay close to 25% of it toward fees when all said and done.
I try and never sale saws on feebay at all cost. I prefer to sale local for less or here.
-
I'd say feebay will bring more money. But you will pay close to 25% of it toward fees when all said and done.
I try and never sale saws on feebay at all cost. I prefer to sale local for less or here.
Guess there was something wrong with the ad I made for eBay? I went to look at it today...and it is just gone!
The fees must be hidden? I only see $25 for the listing and that is it....unless I'm missing something?
Scott (kind of weird it is gone though) B
-
$10 dayton poulan chainsaw http://akroncanton.craigslist.org/grd/4365169321.html
-
$10 dayton poulan chainsaw http://akroncanton.craigslist.org/grd/4365169321.html
(http://images.craigslist.org/00c0c_cFKLNWrud4p_600x450.jpg)
(http://images.craigslist.org/00A0A_2PRYiZ996qb_600x450.jpg)
(http://images.craigslist.org/00Z0Z_6nBpXJgSv0w_600x450.jpg)
(http://images.craigslist.org/00x0x_kG8EJqL41rA_600x450.jpg)
Up for sale or trade is Dayton chainsaw (no bar or chain!)for parts or repair,it has spark ,and thats all i checked..It's missing a few screws and is being sold as is and in non running condition..Text offers to...
That's a rebranded Poulan 3400. 4Z251 or 4Z251A would be a 3400 with an 18" bar. 4Z397 would be a 3700 with a 20" bar.
-
What could be wrong with this chainsaw? ???
http://athensohio.craigslist.org/grd/4383510523.html (http://athensohio.craigslist.org/grd/4383510523.html)
Looks like they put a lot of new plastic on a used (hard) chainsaw.
-
The price is sorta high and like you say there are some miss matches in parts ages that raise suspicion..
This saw is 147 highway miles away. That would be 300 miles on your pickup to go get it?
-
I sold the nice 036 pro I redid for $320. Thats way over price.
-
What could be wrong with this chainsaw? ???
http://athensohio.craigslist.org/grd/4383510523.html (http://athensohio.craigslist.org/grd/4383510523.html)
Looks like they put a lot of new plastic on a used (hard) chainsaw.
The tank and handle looks old. The starter cover usually has a black line on it and it is worn off. The top covers look like they could be new. Looks like it was cleaned up real well, but low usage saw who knows. Way over priced as far as I am concerned. Pull the muffler, do a compression test, start it and see what it sounds like. Pull the clutch drum and see how much wear is on it. Those might tell if it is low hour.
-
Not looking to buy it.
Just found it on CL and thought that it was suspicious.
Very used handle.
Like new sides and top.
No labels.
New "no name" bar.
Advertised as "low usage".
-
Not looking to buy it.
Just found it on CL and thought that it was suspicious.
Very used handle.
Like new sides and top.
No labels.
New "no name" bar.
Advertised as "low usage".
No I was just commenting looks can fool you.
-
About right price $70 new looking poulan 295 farmhand http://columbus.craigslist.org/tls/4378224777.html
-
Then a poulan pro 4620 PP4620AVX for $50 http://zanesville.craigslist.org/grd/4384377738.html
-
5 saws $75 http://sandusky.craigslist.org/grd/4377088146.html
-
Vintage McCulloch Chainsaw Sign http://columbus.craigslist.org/atq/4414514811.html
-
Husqvarna 395 http://cleveland.craigslist.org/tls/4411087778.html
-
husqvarna 257 http://cleveland.craigslist.org/grd/4404778223.html
-
3 saws one price. craftsman = poulan , mac, husky http://mansfield.craigslist.org/grd/4420637263.html
-
3 saws one price. craftsman = poulan , mac, husky http://mansfield.craigslist.org/grd/4420637263.html
The mexi-mac is nothing more than a saw to either toss or get running and sell on CL.
The 36 is a decent saw. I grab those (36-141) when they are cheap and local.
The Poulan is a very good saw. It is either a 3.4 branded 3400, 3.0 branded 3400 (same saw other than a 'false' marking of 3.0ci to meet a lower price point), or 3.7 branded 3800.
If this bunch was local to me I'd be trying to get them for $100. If the P/C are good on the Poulan and the Husky then I'd probably still pay $125 if I had to if I didn't have to make a long drive.
-
2 Makita chain saws DCS 6401 - $100 (Keego harbor)
2 Makita Chain saws for parts or fix. Weak spark! on both.
These are heavy Duty saws. DCS 6401 Purchased at Home Depo rental Tool sale.
http://detroit.craigslist.org/okl/tls/4387487860.html (http://detroit.craigslist.org/okl/tls/4387487860.html)
-
5 saws poulan pro 305 in the group would be my pick. http://cleveland.craigslist.org/grd/4425837427.html
-
stihl 024 http://mansfield.craigslist.org/tls/4428787295.html
-
solo 640 http://cleveland.craigslist.org/tls/4429137929.html
-
Better hurry on this one, lot of guys in the NE flipping saws. Stihl 036 $50 http://cleveland.craigslist.org/grd/4409642803.html
-
Man if this wasnt 45min drive one way. Poulan 305 like new looking for $65. http://akroncanton.craigslist.org/grd/4418701578.html
-
poulan 295 or 4620 $35 or best offer. Looks new. http://mansfield.craigslist.org/tls/4430730492.html
-
Man if this wasnt 45min drive one way. Poulan 305 like new looking for $65. http://akroncanton.craigslist.org/grd/4418701578.html
45 min is nothing. Go get that thing.
-
Man if this wasnt 45min drive one way. Poulan 305 like new looking for $65. http://akroncanton.craigslist.org/grd/4418701578.html
45 min is nothing. Go get that thing.
Not me. My time is more important to me right now.
-
This past Sunday there was a Craig's List incident in town that one should think about?
There was a I-Pad for $225. Caveat #1 (Likely stolen?)
The 48 year old man was to meet the seller at the elementary school playground. Not at the sellers home or place of business? Caveat #2 (No bricks and mortar identifying location?)
When the seller arrived at the school, there were two high school age kids as sellers no car or anything. Caveat #3. Probably hot? (You will be double teamed?)
When the one with the I-pad showed him the device, the other kid put a hand gun to the buyer's head and demanded the money!!!
They ran and the buyer chased in his car but the sellers went out in a field and through the woods.
The cops got the one kid through his cell # two days later.
There's a lot of No No's here.
I hope you guys remember what they are?
Don't be buying any chainsaws at the gas station or mall parking lot?
-
When I make a CL sale, I always arrange to meet at the 'inner' lot at Wal-Mart during daylight hours. This lot is on video at all times ...
-
I suppose it could go the other way too. If you are selling a chainsaw, that is the only chainsaw the buyer sees? The stranger doesn't see the other 30 chainsaws you own or other OPE items? Don't let him see in your shop?
-
When someone like that sees the inside of my shop and comments, I just say "I used to have a lot more saws ... until I started buying so many guns."
-
old mac says make offer http://mansfield.craigslist.org/bar/4439966284.html
what is the model?
Looks like a nice rollernose bar. ;)
Best part, notice the redneck starter handle. ;D
-
john deere 15 chainsaw http://mansfield.craigslist.org/grd/4434034653.html
-
homelite xl 12 http://akroncanton.craigslist.org/grd/4434408367.html
-
poulan 3300 $35 http://columbus.craigslist.org/tls/4439314136.html
-
Skil Chainsaw 605 $30 http://akroncanton.craigslist.org/grq/4403804823.html
-
grrrrr Poulan Predator was hoping the 335 version with 3450 piston - not http://zanesville.craigslist.org/tls/4435537856.html
-
looks like a all black mac cat http://mansfield.craigslist.org/tls/4433644320.html
-
husqvarna 154 se $100 http://cleveland.craigslist.org/grd/4415108756.html
-
husqvarna 154 se $100 http://cleveland.craigslist.org/grd/4415108756.html
Mark (Old040) snagged that one. Posted pics in the SH Husky thread. NICE saw for the money.
-
old mac says make offer http://mansfield.craigslist.org/bar/4439966284.html
what is the model?
Looks like a nice rollernose bar. ;)
Best part, notice the redneck starter handle. ;D
Mac 15. Consumer/farmer saw. Same 'mild' 80.5cc engine that's in the 1-43 and 200 (but built in an 'economy' chassis). It's a 250 engine, but with some of the ports not machined. Also has a strangled intake. Mostly a noise maker/GTG saw. Made to compete with the Wards/Mono, Clinton, Homelite Buz/500, and similar 'budget' saws of the early 1960s. Same bar mount as other large frame Macs, so that bar could be used on something 'more interesting' like a Super 250.
-
Man if this wasnt 45min drive one way. Poulan 305 like new looking for $65. http://akroncanton.craigslist.org/grd/4418701578.html
If I was 45 minutes from it I'd be on my way, and would try to get it for $50.
poulan 295 or 4620 $35 or best offer. Looks new. http://mansfield.craigslist.org/tls/4430730492.html
If that saw was local (20 minutes or less) I'd try to get it for $25.
-
homelite xl 12 http://akroncanton.craigslist.org/grd/4434408367.html
That's a good deal at $15-$25. Even if the p/c are shot a fellow could make much more than that parting it on feebay. Would make a good looking runner to flip with a bit of work. Bet the oiler pickup is just clogged.
poulan 3300 $35 http://columbus.craigslist.org/tls/4439314136.html
Not a bad deal, especially if a fellow could get it for $25.
-
About 10mins from me. Looks like a poulan 295 in green. What model would this be? http://mansfield.craigslist.org/grd/4450505428.html
-
About 10mins from me. Looks like a poulan 295 in green. What model would this be? http://mansfield.craigslist.org/grd/4450505428.html
Probably a 2700, 2750, 2900, or 3050. If you can enlarge the pic you can probably see the model # on the starter cover.
-
I tried that and it was all broken up and unreadable.
-
I tried that and it was all broken up and unreadable.
You'll have to ask the guy what the EPA decal on the rear of the chassis says.
(http://images.craigslist.org/00E0E_5UZ1SnqgX8C_600x450.jpg)
My guess is that it's a 2750 Farmhand. That's what was connected to this pic I took off the net. Looks like the 2750 has the red "Super Clean", while the 2900 has the green "Super Clean".
(http://i1.ytimg.com/vi/phoAWXDZoeI/hqdefault.jpg)
This pic came from a post where a guy was talking about his 2900. IIRC they're both 46cc anyways....
(http://www.fidello.net/scott/Poulan%20Farmhand%202900%20with%20broken%20recoil%20housing.jpg)
-
Impulse buyer? . . .
Local Stihl 661, he just had to have the first one? Never found a need for it? $1800
http://mansfield.craigslist.org/grd/4450217199.html
-
That 661 has been on and off CL local since last year.
-
Homelite 410 $100 http://sandusky.craigslist.org/grd/4462933480.html
-
Homelite XL 103 $10 http://columbus.craigslist.org/grd/4464493700.html
http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/cc8b1cfa0c6e498d88256c28006444b1?OpenDocument
-
That poor abused thing. Those XL-101 series Homelites are actually impressive little saws. Good power, and lightweight. I have a nice XL-103 that I just need to freshen up with crank seals and rings.
-
Makita 6421 looks pretty clean?
http://columbus.craigslist.org/grd/4452578199.html
-
Makita 6421 looks pretty clean?
http://columbus.craigslist.org/grd/4452578199.html
Heck at that price I will take a rebuilt Husky from Tim anytime.
-
Thank you Roger for the very gracious comment! Looked very close and don't see the 268/272 on that shelf anywhere. More importantly, what car is in the picture?
-
Thank you Roger for the very gracious comment! Looked very close and don't see the 268/272 on that shelf anywhere. More importantly, what car is in the picture?
No that saw is not on the shelf because it is being used a lot right now.
The car us a 1954 Buick. It was done like the mild customs from the 50's and 60's.
-
Poulan pro 330 20" $50 http://columbus.craigslist.org/grd/4468898831.html
-
Poulan pro 330 20" $50 http://columbus.craigslist.org/grd/4468898831.html
man that's a steal even if it didn't run...looks like it's in decent shape. ..why don't those show up in ks?
-
372xp $375 http://mansfield.craigslist.org/grd/4503617339.html
-
Husqvarna 395xp $650 http://mansfield.craigslist.org/grd/4506668785.html
-
Same power as a stihl 660 he says :D ::). Echo twin 610 http://akroncanton.craigslist.org/grd/4499636178.html
-
Just in case one of you folks looking. http://akroncanton.craigslist.org/tls/4479641153.html
-
394xp $400 or best offer http://mansfield.craigslist.org/grd/4517993103.html
-
Dolmar 120si $250 http://zanesville.craigslist.org/grd/4541001863.html
-
Says 80cc Mac 1-51 for make offer http://mansfield.craigslist.org/tls/4545056494.html
-
poulan 4000 bowsaw bow saw http://cleveland.craigslist.org/grd/4565517138.html
-
poulan 2400 still for sale $79 http://columbus.craigslist.org/grq/4509160211.html
-
$10 a saw one is a poulan s25 av http://akroncanton.craigslist.org/tls/4558727526.html
-
I'd give $30 for that David Bradley..
-
I'd gladly take the two Poulans for $10 each if they were local....
-
Homelite 750 w/42in bar, over near Pittsburgh
http://pittsburgh.craigslist.org/grd/4550484763.html
-
Echo Power Pruner with 5ft extension, over near Pittsburgh;
http://pittsburgh.craigslist.org/grd/4541276001.html
-
Collectors Bicentennial Poulan, over near Pittsburgh; Says NEVER used...
http://pittsburgh.craigslist.org/tls/4545260234.html
-
Chainsaw Helicopter. Bizarre. Homelite
http://pittsburgh.craigslist.org/art/4506315926.html
-
Echo Power Pruner with 5ft extension, over near Pittsburgh;
http://pittsburgh.craigslist.org/grd/4541276001.html
Like to have that 5' ext for mine. Great price too. $100 for the 5' section.
-
Chainsaw Helicopter. Bizarre. Homelite
http://pittsburgh.craigslist.org/art/4506315926.html
We'll be seeing a chainsaw wind vane next?
-
http://pennstate.es.craigslist.org/tls/4582228395.html (http://pennstate.es.craigslist.org/tls/4582228395.html)
Any advice on this?
-
Good price for new. Family tree 6700 670 then 680. Updates along the way. All for the better IMO.
High 5's to low 6's like $629 at Home Depot. With 24" http://www.homedepot.com/p/ECHO-24-in-66-8-cc-Gas-Chainsaw-CS-680-24/100662068
Not on power range of 372 440 etc. More like 365.
-
And HEAVY, from what I can see! Thanks Kevin!
-
And HEAVY, from what I can see! Thanks Kevin!
IMO same feel weight of the 365 372 etc. Guessing 14lb and some ounces.
-
if this is a no no please forgive me. http://kansascity.craigslist.org/for/4603053647.html diston mercury chan saw. kinda cool looking. says 2 cyl opposed.
-
You did fine. Great saw
-
if this is a no no please forgive me. http://kansascity.craigslist.org/for/4603053647.html diston mercury chan saw. kinda cool looking. says 2 cyl opposed.
Sharing freely is what this place is about. Post up.
-
He's asking too much IMHO (although having a good loop of 3/4" chipper is a plus). Those are REALLY cool old saws. I haven't dove into getting my KB-7AY up and running yet. It'll be fun to run it at GTG's.
-
I saved all the pics on my pc. I thought the owner did a great job with the pics. not sure if or when I can get them on here. where do I post them on here?
-
Click the reply button under the last post and it will give you a bigger editor.
Down below the editor box is the "Attach:" box.
Click on the Attach: box and it will go to your computer files. You will have to select the directory where you put them in your computer.
When you select a picture it will high light that entry.
Then press "Open" in the box at the bottom and you will return to the Chainsaw Repair editor.
You can then press "Post" at the bottom of the Chainsaw Repair editor and your entry will be posted in the forum.
To add a 2nd picture, click on "Modify" in your post and select the next picture. etc.
Seems as though you can only add one picture at a time. You will have to re-edit your post with the "Modify" button for each picture.
There's 15 pictures in that ad. I don't know if you can get all 15 in one post?
-
or just do this. right click image on CL at copy image location paste here like this. Click 2nd row IMG code and paste between. Just click quote on my post here to see what I did.
(http://images.craigslist.org/00Q0Q_h1aOiHeSc4A_600x450.jpg)
-
But when the seller cancels his ad, all that will be there is a ASCII cow. The links will no longer work?
-
ok I managed to post them on photobucket and I managed to lose them on my pc. not sure how to get them from pb to here.
-
Go to PhotoBucket and get your picture on the screen in viewing mode (Not Icon Mode) and over on the right you will see a option to click on "img". Left click on it and then come back to your Chainsaw repair editor and past it where you want the picture.
You will have to do this for each picture.
Have photo bucket in another tab so you can switch back and forth between photobucket and chainsaw repair.
-
But when the seller cancels his ad, all that will be there is a ASCII cow. The links will no longer work?
I copy and save to puter Jim. Then if they disappear I can replace if needed. Most times not needed.
-
John Deere 15 with paper work. http://mansfield.craigslist.org/grd/4618246080.html
-
is that a metal hardcase? looks like a time capsule.
-
http://mansfield.craigslist.org/grd/4624200385.html
1950 Model 3-25 ?
-
A 32" roller nose bar?
-
I have 32" and 36" RN bars (and several smaller ones........down to 12". They used to be common. They have less friction than a SN bar.......but are much more fragile (especially when boring). I just run them at GTG's.
-
dolmar 5100 $199 http://tuscarawas.craigslist.org/grq/4665117259.html
-
stihl 026 $160 http://cleveland.craigslist.org/tls/4674273913.html
-
poulan pro 260 $50 I had a couple of these and great little saws with AV. http://columbus.craigslist.org/for/4673646996.html
-
P42 $50 http://akroncanton.craigslist.org/grd/4646117014.html
-
Seems like some good prices on reconditioned stuff?
recon Husqvarna chain saws and string trimmers
240 chain saws @ $119
435 saws @$154
440 saws @ $189
445 saws @ $209
electric @ $225
Trimmers model 122LDX @ 149
223L @$159 128LD @$140
128CD @$126
224L @ $199
122C @$129
http://columbus.craigslist.org/grq/4630364513.html
-
wright chainsaw $25 http://cleveland.craigslist.org/tls/4672821867.html
-
stihl 044 http://akroncanton.craigslist.org/grd/4619412590.html
-
wright chainsaw $25 http://cleveland.craigslist.org/tls/4672821867.html
That's one of their blade saws. From the 1960's. For some damn reason, clueless CL sellers often feel the need to pull some guess out of their butts regarding the age of their 'vintage' saw. They're almost always off by 10-20 years. One of my peeves......
-
Looks like Arizona instead of Ohio with that pea gravel in place of the grass.
-
pea gravel used for landscaping. I used to use it for truck weight for plowing then pour in drive at end of season.
-
wright chainsaw $25 http://cleveland.craigslist.org/tls/4672821867.html
That's one of their blade saws. From the 1960's. For some damn reason, clueless CL sellers often feel the need to pull some guess out of their butts regarding the age of their 'vintage' saw. They're almost always off by 10-20 years. One of my peeves......
Lets have a brew it wont matter after a few. ;) :P
-
Sounds good to me Kevin.
-
Foley Belsaw sharpener 75 http://columbus.craigslist.org/grq/4678690517.html
-
craftsman 50cc aka poulan 5020 $80 http://akroncanton.craigslist.org/tls/4678003884.html
-
I missed out on a free Poulan XXV by an hour. Rats!!! Not a fan of green but they were good camp saws.
-
I missed out on a free Poulan XXV by an hour. Rats!!! Not a fan of green but they were good camp saws.
Nobody's perfect.8)
The XXV series saws were made in many colors besides green (although I'm guessing you're referring to Poulan as opposed to the color). An XXV series saw is one of the best tophandles made (by anyone). MUCH better than the 'suitcase handle' Stihls that were made during the same time period. Not talking about a Micro series saw (including the Micros that have "XXV" as part of their model name). Still good saws (great for camp/pickup/trunk/etc duty) but not in the same class as the XXV's.
-
Husqvarna 2100CD $350 http://mansfield.craigslist.org/grd/4687597536.html
-
Poulan 5020 $75 http://mansfield.craigslist.org/tls/4684941511.html
-
stihl 025 $100 http://mansfield.craigslist.org/grd/4707286651.html
-
Pioneer partner 5000 plus $150 http://mansfield.craigslist.org/grd/4703781853.html
-
stihl 028 super $75 http://mansfield.craigslist.org/grd/4722287006.html
-
http://utica.craigslist.org/grd/4726048138.html
Poulan 306a for sale on local cl. I don't know much about them but know the old ones get a lot of attention, so in case anyone would be interested.
-
husqvarna 350 $150 http://mansfield.craigslist.org/grd/4769383576.html
-
s25 av http://akroncanton.craigslist.org/tls/4740729245.html
-
poulan 2400 woodmaster http://columbus.craigslist.org/grq/4749535107.html
-
dolmar 5100 $199 http://tuscarawas.craigslist.org/grq/4766747800.html
-
stihl 036 $300 http://mansfield.craigslist.org/bar/4769279393.html
-
2 $75 http://mansfield.craigslist.org/grd/4769495285.html
says = 2 Homelite Super EZ Automatic Chainsaws.
-
old chainsaws $60 each Farm Primatives http://columbus.craigslist.org/clt/4721561778.html
-
stihl 036 $300 http://mansfield.craigslist.org/bar/4769279393.html
This one is sold...
And for much less than the selling price 8)
-
stihl 036 $300 http://mansfield.craigslist.org/bar/4769279393.html
This one is sold...
And for much less than the selling price 8)
I offered him a trade too. But wasnt wanting a double barrel.
-
stihl 046 http://mansfield.craigslist.org/for/4773008761.html
-
says new 562 $599 http://akroncanton.craigslist.org/grd/4742888780.html
-
husqvarna 351 http://columbus.craigslist.org/tls/4774415794.html
-
Craigslist down for anyone else?
-
works OK for me
-
Just checked and Craig's list worked ok.
-
No joy here. Dns server failure notice and bad security certificate notices
-
Yeah I had some weird stuff before. Now it works again.
-
husky 350 $135 http://mansfield.craigslist.org/grd/4769383576.html
-
poulan 2800 $85 http://akroncanton.craigslist.org/grd/4777267561.html
-
echo 800P NIB http://columbus.craigslist.org/tls/4777043969.html
-
stihl 034 trading for bang bangs http://akroncanton.craigslist.org/bar/4776437269.html
-
stihl 036 QS $300 http://zanesville.craigslist.org/grd/4778092226.html
-
Indian chainsaw and a Mall http://akroncanton.craigslist.org/grd/4778319172.html
-
poulan pro 330 $150 http://cleveland.craigslist.org/grd/4808361263.html
-
husqvarna 555 $375 http://akroncanton.craigslist.org/grd/4807900811.html
-
stihl 046 http://akroncanton.craigslist.org/tls/4807678221.html
-
That is a low use 046. The handle isn't faded out or anything on it.
-
Vintage stuff..
the giant saw is the two man McCulloch made in los angeles and has a 48"bar with the holders handle at the end of bar, [what a beast] sn 54918043
https://rockford.craigslist.org/grq/4801461266.html
-
McCulloch 1-51 http://mansfield.craigslist.org/for/4821102755.html
McCulloch 1-41 http://mansfield.craigslist.org/for/4821087857.html
Mall 1MG http://mansfield.craigslist.org/for/4821095459.html
Husky 350 http://mansfield.craigslist.org/grq/4820092148.html
-
tecumsah chainsaw http://akroncanton.craigslist.org/grd/4823326532.html
jd http://sandusky.craigslist.org/grd/4813264268.html
-
Wards 133cc ? http://columbus.craigslist.org/grd/4820377023.html
-
Another Mono.
It looks pretty good compared with most of them.
-
stihl 044 http://akroncanton.craigslist.org/grd/4827067652.html
@DexterDay close to you.
-
That is really close. Wonder if it's a 10 mm?
Gonna email him now
-
Clean looking saw. Ypu get a hold of them Dex?
-
No. I sent an email asking for pics of all sides.
No response yet..
-
No. I sent an email asking for pics of all sides.
No response yet..
This is in ad. ANYONE WHO HAS EMAILED ME TODAY ABOUT THIS SAW PLEASE RESEND EMAILS SOMEHOW THEY GOT LOST. THANK YOU AND SEND A CONTACT NUMBER I WILL CALL YOU
@DexterDay
-
Poulan 2300 cva $50 http://akroncanton.craigslist.org/grd/4827488532.html
-
husky 359 http://columbus.craigslist.org/grd/4785875277.html
-
pp295 $50 cant get running. http://cleveland.craigslist.org/tls/4778995533.html
-
@660magnum http://cleveland.craigslist.org/msg/4813359357.html
Hohner Harmonica came up in my echo search.
-
A 96 note chromatic is a old timer but would be a honey to learn to play. It hasn't been played to death.
Mine is a 64 note with the sharps controlled by a push lever on the right side. Works a little different.
The regular pocket harmonica is a 20 note Diatonic.
-
A 96 note chromatic is a old timer but would be a honey to learn to play. It hasn't been played to death.
Mine is a 64 note with the sharps controlled by a push lever on the right side. Works a little different.
The regular pocket harmonica is a 20 note Diatonic.
You know if I ever get out there for GTG you and I will have to get together. I will the play the guitar and you the Harp. Fun fun.
-
Sounds like a good idea.
-
Clean looking 066 Redlight PHO $650
http://mansfield.craigslist.org/grd/4830219405.html
-
husky 350 $100 or trade http://columbus.craigslist.org/bar/4832417550.html
-
stihl 044 $350 OBO ;) http://akroncanton.craigslist.org/grd/4831872561.html
looks to have been rode hard and put up wet too.
See how long it takes Dex to show up. ;) :D ;D
-
husky 365 special http://akroncanton.craigslist.org/grd/4822936413.html
-
stihl pole saw http://columbus.craigslist.org/tls/4821967878.html lol with a bent shaft problem it sounds like.
-
stihl 044 $350 OBO ;) http://akroncanton.craigslist.org/grd/4831872561.html
looks to have been rode hard and put up wet too.
See how long it takes Dex to show up. ;) :D ;D
::)
-
stihl 044 $350 OBO ;) http://akroncanton.craigslist.org/grd/4831872561.html
looks to have been rode hard and put up wet too.
See how long it takes Dex to show up. ;) :D ;D
::)
Fail
I was expecting you in less then a hour.
Sorry no nice stihls today.
-
Sorry buddy...
Had to work today. :'(
-
Little high IMO but here you go. stihl 460 $600 or best. http://akroncanton.craigslist.org/tls/4834138920.html
-
Rather beat up looking?
I guess my big Stihls all looked that way before someone cleaned them up with another part here and there?
-
McCulloch Two Main Chainsaw http://akroncanton.craigslist.org/atq/4848233941.html
-
Wouldnt mind another one of these for my dad this time. I gave the last one to 460woodchucks son. poulan 2400 http://columbus.craigslist.org/grq/4856404136.html
-
husky 394 looks nice http://akroncanton.craigslist.org/grd/4860030818.html and priced right
-
poulan 4000 for a buck and quarter. http://sandusky.craigslist.org/grd/4858895825.html
-
new China 070 106cc $595 http://columbus.craigslist.org/bfd/4841005883.html
-
McCulloch 200 http://zanesville.craigslist.org/tls/4851166381.html
-
020T before 200T 064 046 http://akroncanton.craigslist.org/bar/4850332010.html
-
DD CCC? http://columbus.craigslist.org/tls/4850270899.html
-
http://mansfield.craigslist.org/for/4821095459.html
Mall 1MG
-
http://mansfield.craigslist.org/for/4821102755.html
McCulloch 1-51
-
http://mansfield.craigslist.org/for/4821087857.html
McCulloch 1-41
-
200T 460 660 http://akroncanton.craigslist.org/grd/4857798729.html
-
mm dealer
020 026 http://mansfield.craigslist.org/grd/4836562640.html
-
Best offer http://mansfield.craigslist.org/tls/4832968402.html MCCULLOCH 1-51
-
Interesting to look at. says 1947 Chainsaw 1948 Disston Model DO100 http://akroncanton.craigslist.org/atq/4862528680.html
-
Stihl LR-75 hydraulic pruning saw http://mansfield.craigslist.org/tls/4814915285.html
-
pioneer what? $60 http://sandusky.craigslist.org/tld/4864268141.html
-
stihl 026 http://columbus.craigslist.org/grd/4811061441.html
-
stihl 024 http://akroncanton.craigslist.org/grd/4828346988.html
-
vintage chainsaws - $50 http://cleveland.craigslist.org/grd/4868276954.html
-
A Pioneer 50cc 1072?
-
@DexterDay stihl 025 http://akroncanton.craigslist.org/grd/4842452516.html
-
sears chain saw model make ? http://cleveland.craigslist.org/tls/4870915846.html
-
sears chain saw model make ? http://cleveland.craigslist.org/tls/4870915846.html
Roper. You don't see them often.
But, that don't automatically make them valuable.
-
http://detroit.craigslist.org/wyn/grd/4839264852.html. Buncha stihls for sale didnt know where else to post
-
Moved it to the for sale. Don't we have an eBay thread here somewhere
-
That dudes been posting that for a couple years now.
-
I looked for craigslist thread. 1st I've seen that ad. I search clist alot.
-
Oh by the way in the trades swap section. There is threads for Craigslist, ebay listings etc. ;)
-
bump for duck
-
I found it. I just can't merge it on the iPad unless I'm missing where to click somewhere.
-
I can't find the merge topic stuff on these mobile devices:(
-
Found it..http://detroit.craigslist.org/wyn/grd/4839264852.html
-
I can't find the merge topic stuff on these mobile devices:(
Mike just so you know. It is a 2 part move to get into a existing thread. Just like you moved thread to this board by MOVE. Then you have to do a MERGE with and pick thread to merge with.
I just did that with the thread you moved from stihl to for sale to here. If you look at above post you will see original thread post. Goes by date times to fit in.
Keep learning it will help big time. Thanks.
-
I can't find that merge button on this iPad. Is it on the split topic part?
-
No not a split topic part.
-
Look under thead.
Do you see this? Runs along bottom of threads.
Move Topic
Remove Topic
Lock topic
Set topic non-sticky
Merge Topics
Link to Calendar
-
Those aren't on tapatalk. I have to go back to the actual browser but they're here. Now I know how to fix that
-
2 066 660 saws $250 a piece needs gone through and a 020. http://akroncanton.craigslist.org/tls/4884353339.html
Timer on Dex.
-
2 066 660 saws $250 a piece needs gone through and a 020. http://akroncanton.craigslist.org/tls/4884353339.html
Timer on Dex.
Those POS have been on and off CL for 2 years
-
2 066 660 saws $250 a piece needs gone through and a 020. http://akroncanton.craigslist.org/tls/4884353339.html
Timer on Dex.
Those POS have been on and off CL for 2 years
So you seen them?
-
2 066 660 saws $250 a piece needs gone through and a 020. http://akroncanton.craigslist.org/tls/4884353339.html
Timer on Dex.
Those POS have been on and off CL for 2 years
So you seen them?
I have seen those ads as well..
I'd give him $250 for the whole lot. ;D
-
2 066 660 saws $250 a piece needs gone through and a 020. http://akroncanton.craigslist.org/tls/4884353339.html
Timer on Dex.
Those POS have been on and off CL for 2 years
So you seen them?
I have seen those ads as well..
I'd give him $250 for the whole lot. ;D
I bet you would. ;)
So have you seen them? Are they that fubarred?
-
husqvarna 576xp builder it sound like $150 http://cleveland.craigslist.org/grd/4873076150.html
-
McCulloch 1-43 $40 http://akroncanton.craigslist.org/tls/4886630510.html
-
poulan pro 260 $25 http://akroncanton.craigslist.org/for/4877059134.html
-
sears barracuda chainsaw ? $150 http://sandusky.craigslist.org/tls/4885009295.html
-
Looks like regular chain on it though? Which is good
-
About as close as new as you can get without being new. Husky 357xp. New price too. http://akroncanton.craigslist.org/grd/4896255697.html
-
About as close as new as you can get without being new. Husky 357xp. New price too. http://akroncanton.craigslist.org/grd/4896255697.html
That is super clean. I wish I had kept the one I had.
-
https://shoals.craigslist.org/tls/4858994355.html don't know if its worth posting just thought you guys might like to see it. what is a old saw like that really worth I have no idea
-
http://cleveland.craigslist.org/grd/4843300034.html Husqvarna 266
-
$90 262xp looks nice but needs repair it says http://columbus.craigslist.org/grd/4920861175.html
-
$60 pioneer it looks like http://sandusky.craigslist.org/tld/4920036845.html
-
predator chainsaw grrrrrr not the right one ; http://columbus.craigslist.org/grd/4906899910.html
-
predator chainsaw grrrrrr not the right one ; http://columbus.craigslist.org/grd/4906899910.html
What r you looking for?
-
predator chainsaw grrrrrr not the right one ; http://columbus.craigslist.org/grd/4906899910.html
What r you looking for?
Roger has one I was watching years ago. He bought it and I had passed on it. RED poulan 335. Instead of having thin ring piston and rings NLA. It used a 3450 330 piston .
Thread here on it.
-
I believe I have only seen one other 335 predator Kevin. What was surprising I was able to get a brand new brake and clutch cover for it in red.
-
Homelite 350-P http://vancouver.craigslist.ca/bnc/tls/4867273549.html
Couple of Pioneers http://vancouver.craigslist.ca/rds/tls/4888967109.html
Nice Homey XL-1 http://vancouver.craigslist.ca/van/tls/4894975380.html
This one tempts me http://vancouver.craigslist.ca/rds/tls/4921598514.html
-
stihl 084 $600 http://sandusky.craigslist.org/grd/4932154763.html
-
Not a bad looking 084.
-
stihl 084 $600 http://sandusky.craigslist.org/grd/4932154763.html
I do not need this. I do not need this. I do not need this.....
-
http://syracuse.craigslist.org/grd/4932911409.html
Lot of Poulan stuff local.
-
http://syracuse.craigslist.org/grd/4932911409.html
Lot of Poulan stuff local.
Wow, couple guys will be drooling here.
-
There will probably be some but not myself. Now if it were 3750,365,330,335,3450,3500, parts then let the drooling begin.
-
There will probably be some but not myself. Now if it were 3750,365,330,335,3450,3500, parts then let the drooling begin.
Thats me too. ;) Plus some others.
-
Yeah I sorta though there might be some interest in those green saws here. I don't know a thing about them myself but that's a lot for $200!
-
If ALL the cylinders and pistons are good then he's not too far off. Otherwise, I wouldn't pay more than about $100 for all of it (I'm cheap, and already have examples of all those saws plus many parts). Maybe a bit more if the 245A has a good P/C. Heck...........................I was thinking for a minute that he'd raided my shop..... 8)
I run the models he has represented there....................but I'd be more enthused if there was also big CounterVibe (4200-8500) stuff in the mix...:D
-
Homelite Super 1050 http://zanesville.craigslist.org/grd/4948349316.html
-
mcculloch 740
http://mansfield.craigslist.org/grd/4964442966.html
-
Dolmar 120Si 68cc in Cardington, Ohio
http://mansfield.craigslist.org/grd/4975108558.html
-
How do make a 120si big bore?
-
How do make a 120si big bore?
I'm thinking he's FOS.
-
me 2
-
Hahahaha. Looks that way.
-
Wish I could take it for a spin and find out what was all really done.
Reminds me of a guy recently telling folks his 066 660 was 110cc. I was like OK tell me how you did this. LOL. Bore stroke etc? All he ended up having was a woods ported stock bore 066. DA thought because it was ported it grew in cc's. ;)
-
Your welcome to compare it with my stock Dolmar 6800i which is just a 120Si with a different style brake.
-
25 miles one way. $30 Only if it would have been the right series of poulan I like. http://mansfield.craigslist.org/grd/4982296075.html
-
Poulan 3750 60cc http://akroncanton.craigslist.org/grd/5002385654.html
-
stihl http://columbus.craigslist.org/tls/5002680663.html
-
:P :o :o Bargain of the day. http://cleveland.craigslist.org/tls/5003191057.html
-
Pioneer chainsaw http://sandusky.craigslist.org/tld/5012436679.html
-
poulan 220 http://columbus.craigslist.org/for/5009624077.html
-
Big Husky http://cleveland.craigslist.org/gms/4987836914.html
-
member http://zanesville.craigslist.org/grq/4999168454.html
-
http://santabarbara.craigslist.org/grd/4993072205.html
-
nice 288 $550 /\ in the CL ad
-
Looks really clean. Happy to go look at it if anyone's interested...
-
http://santabarbara.craigslist.org/grd/4993072205.html
Cylinder cover seems different or maybe I just never paid attention to these.
-
Looks correct to me.
I wonder what chainz it comes with? Lol
-
That's California gang banger lingo....Saws likely stolen! Lol!
-
http://santabarbara.craigslist.org/grd/4993072205.html
Cylinder cover seems different or maybe I just never paid attention to these.
Looks correct to me.
I wonder what chainz it comes with? Lol
Know why it was different in my mind, I was thinking of wrong saw and cover.
(https://scontent-iad.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/11182337_10153162358600659_8197405700626395372_n.jpg?oh=8da758104e064087ae7983a9dd72870e&oe=55C1F665)
-
Poulan K100 with 2 bars bow saw http://mansfield.craigslist.org/grd/5019551839.html David Bradley
(http://images.craigslist.org/01717_6nA3WMSFZBw_600x450.jpg)
(http://images.craigslist.org/01010_klq4VPO6Zx7_600x450.jpg)
-
395 $750 36" Crestline, Ohio
http://mansfield.craigslist.org/grd/5015626668.html
-
craftsman 3.4 or 3.7 $50 http://cleveland.craigslist.org/tls/5031721648.html
-
Aaron ;) 50th poulan http://akroncanton.craigslist.org/grd/5036286563.html
-
http://vancouver.craigslist.ca/pml/grd/5101543676.html
Anybody up for this one?
-
http://vancouver.craigslist.ca/pml/grd/5101543676.html
Anybody up for this one?
When I saw that I thought of the old rail dragsters.
-
I would be interested but not for what he is asking. ::)
-
I would be interested but not for what he is asking. ::)
LOL I hadnt even seen that. :o
-
craftsman 3.4 or 3.7 $50 http://cleveland.craigslist.org/tls/5031721648.html
Not a bad price for a Craftsman branded 3400 or 3800.
Aaron ;) 50th poulan http://akroncanton.craigslist.org/grd/5036286563.html
Haven't checked in here for a while (don't get notifications anymore, and the classifieds section posts don't show up in the "unread posts" index). Was it a 50th Poulan Pro 310 or 315? How much did he have it listed for? Ad's been deleted, so somebody got it....
-
Chardon Ohio Homelite 450 $75 http://cleveland.craigslist.org/grd/5120785361.html
(http://images.craigslist.org/01414_kiVh8NRmjJX_600x450.jpg)
(http://images.craigslist.org/00J0J_jHGyrOjJdg_600x450.jpg)
-
homelite 360 http://cleveland.craigslist.org/grd/5120803129.html
-
poulan 5020 wish I had a crack at fixing this http://cleveland.craigslist.org/grd/5127363436.html
info in ad === Earlier in the summer I picked this Poulan PP5020AV chainsaw from a curbside pile set out for trash pickup. It was hard to believe someone would have put this out as trash considering how little use and wear and tear it showed. It appears to have had minimal use from it's condition. You can see this from the attached photos. The bar and chain are hardly worn though I think the saw has been left outside to get rained on or wet. The cutting edges on the chain look as if they were new and unused or freshly sharpened.There is superficial rust on the muffler and some in areas on the chain.
I have tried to get it to fire over hoping to have lucked out with this find. But it refuses to run. It seems to be OK as far as the fuel supply is concerned. But did not have any spark showing. First making sure there were no lose contacts, wires or bad on and off switch I was thinking the ignition coil was shot. I ordered an OEM replacement coil, and as long as I was at it, a new OEM pleated filter and a missing top dust cover figuring this would fix the problem. After installing the new coil there is plenty of spark at the plug, but still no indication of any cylinder firing. Nothing. After looking with a flashlight through the spark plug hole, I discovered STRANGE looking marks on what I can see of the cylinder walls. I think the saw problem is due to lack of compression. A previous owner evidently has done something BONE HEADED with this saw.
I spent $37.50 for the new parts from Jacks Small Engine Parts on line. I would like to get $37.50 for the Poulan PP5020AV as is, just to recoup the cost of parts I ordered. I had hoped at least to use the nice chain and bar on my well worn Poulan Wild Thing but it is not even close to fitting. If you have a Poulan PP AV series saw that could use freshening up, this is a real deal for salvaging and combining parts from this little used saw with what you have.
-
3 poulan saws $80 http://mansfield.craigslist.org/tls/5121585496.html
-
Good deal on a nice looking 028AV, $100. I may even call...
http://albany.craigslist.org/grd/5122091806.html
-
Stihl 361, $250. Looks in decent shape too.
http://ithaca.craigslist.org/grd/5138171253.html
-
Stihl 250 with case $185 @DexterDay didnt know if your neighbor had found one yet or not. Least I think it was you looking for one for somebody on the cheap.
http://mansfield.craigslist.org/tls/5145402664.html
LOL just noticed in a husqvarna case. That right there makes it worth more. ;) ;D
-
Yeah. He got something (it's a Craftsman something?/ 16" bar and 40 some cc). For what he paid, I could have done better.
But sometimes you can't fix stupid.
-
http://vancouver.craigslist.ca/rds/tls/5139183428.html.
Is this guy on happy grass or what ???
http://vancouver.craigslist.ca/bnc/tls/5092776785.html
I would like this one but price is a little heavy.
-
Pioneer 1100 http://mansfield.craigslist.org/bar/5161616050.html
-
homelite xl with matching blue case http://mansfield.craigslist.org/grd/5187657489.html
-
pioneer 1100 http://mansfield.craigslist.org/for/5161616050.html
-
Tecumseh ? http://chainsawrepair.createaforum.com/trades-swap-section/craigslist/new/#new
-
MCCULLOCH 1-51 http://mansfield.craigslist.org/tls/5174887137.html
-
lancaster ? http://cleveland.craigslist.org/tls/5183940436.html
-
358.350201 46cc http://columbus.craigslist.org/grd/5189493064.html
-
husqvarna 50 http://akroncanton.craigslist.org/tls/5175600574.html
-
stihl 044 http://columbus.craigslist.org/grd/5188842865.html
-
MALL SAW electric http://akroncanton.craigslist.org/for/5173868436.html
-
Stihl 034 super = stihl 036 ;) $250 is a good buy IMO. Better hurry one of the local flippers will sniff this one out.
http://mansfield.craigslist.org/sop/5220878011.html
(http://images.craigslist.org/00J0J_heEy37ZJPjv_600x450.jpg)
(http://images.craigslist.org/00L0L_a9hLXbhUSHo_600x450.jpg)
-
Dolmar 6000i http://mansfield.craigslist.org/grd/5227811106.html
(http://images.craigslist.org/00G0G_f1i6MeomqLY_600x450.jpg)
@660magnum does this look like it has heated handles on it like yours? I think it appears so. Cant remember which side the switch was on.
-
Stihl 026 http://mansfield.craigslist.org/grd/5226726687.html
-
357xp http://cleveland.craigslist.org/grd/5220043365.html
-
MS361 and 28" bar hmmm http://columbus.craigslist.org/grd/5217434621.html
-
$75 poulan 4000 ;) painted orange http://akroncanton.craigslist.org/grd/5221984922.html
-
poulan 306a $40 http://akroncanton.craigslist.org/grd/5225723850.html
-
Dolmar 6000i http://mansfield.craigslist.org/grd/5227811106.html
(http://images.craigslist.org/00G0G_f1i6MeomqLY_600x450.jpg)
@660magnum does this look like it has heated handles on it like yours? I think it appears so. Cant remember which side the switch was on.
Yes it does.
That would be a real sweetheart
(http://img.photobucket.com/albums/v11/jamesirl/Dolmar6000i20375.jpg?t=1336268498)
-
That 4000 is a good deal.
-
That 4000 is a good deal.
There is a green 4000 for $150 now too.
-
dayton 22970 chainsaw top handle with av http://akroncanton.craigslist.org/grd/5221923828.html
-
dayton 22970 chainsaw top handle with av http://akroncanton.craigslist.org/grd/5221923828.html
Dayton branded Poulan S25-CVA.
-
That reminds me. I have to go close a CL ad. Just met a guy today about 1/3 of way coming from Akron.
-
Barn cleaning out http://akroncanton.craigslist.org/for/5236973837.html
-
old poulan ? says 63 http://akroncanton.craigslist.org/grd/5238165903.html
-
If this wasnt hour 45mins 1 way I would buy. Maybe someone else would like a possibly great deal on a jonsered 2171 http://akroncanton.craigslist.org/for/5259042001.html
Heck nice freaking bar prob $50 worth
-
If this wasnt hour 45mins 1 way I would buy. Maybe someone else would like a possibly great deal on a jonsered 2171 http://akroncanton.craigslist.org/for/5259042001.html
Heck nice freaking bar prob $50 worth
Gone already
-
If this wasnt hour 45mins 1 way I would buy. Maybe someone else would like a possibly great deal on a jonsered 2171 http://akroncanton.craigslist.org/for/5259042001.html
Heck nice freaking bar prob $50 worth
Gone already
Was $225
-
Local stihl 066 no decomp $650 with new 25" http://mansfield.craigslist.org/grd/5268461588.html
-
pretty local stihl 440 $590 http://mansfield.craigslist.org/tls/5263950900.html
-
stihl 391 , not 390 like it says. http://mansfield.craigslist.org/tls/5264124135.html
-
pioneer p52 http://columbus.craigslist.org/grd/5261387939.html
-
Pioneer looks clean!!
-
Pioneer looks clean!!
Yep. I have past on way cheaper though. One was like 125 or something. I dont know these saws very well at all, so it might have been p60 or something heck I dont know. Was in the 80something cc range I think.
-
Looks like I can see the reed valve block coming off the top side of the crankcase at an angle?
-
Same as poulan pro? Is Pioneer same as Partner P series?? Confused...
-
The poulan pro 525 is the same as the p52. 665 is the same as the later p62
-
1959 Mcculloch Chainsaw Super 44A - $70 http://mansfield.craigslist.org/tls/5277170790.html
MANUFACTURED BY:McCULLOCH MOTORS CORP.LOS ANGELES, CALIFORNIA, U.S.A.
SERIES OR ASSEMBLY NUMBER:none
YEAR INTRODUCED:July 1959
YEAR DISCONTINUED:May 1960
ENGINE DISPLACEMENT:5.3 cu. in. (87 cc)
NUMBER OF CYLINDERS:1
CYLINDER BORE:2.125 in. (54 mm)
PISTON STROKE:1.50 in. (38 mm)
CYLINDER: Aluminum with cast iron sleeve
INTAKE:Reed valves and third port induction system
WEIGHT :19 lbs. powerhead only
OPERATOR CONFIGURATION:One Man operation
HANDLEBAR SYSTEM:Rigid
DRIVE:Direct
-
Welder Miller CP-200 - $450 http://mansfield.craigslist.org/for/5273856152.html
-
Kobalt 40V Lithium Ion Battery 12" Chainsaw - $114 http://columbus.craigslist.org/tld/5277180934.html
-
372xp - $500 http://columbus.craigslist.org/grd/5275206702.html
-
Mac 610 x 2 $35 each http://mansfield.craigslist.org/grd/5275136502.html
-
2 man McCulloch 755 http://cleveland.craigslist.org/bar/5304579376.html
-
poulan 306 a $50 http://sandusky.craigslist.org/grd/5302873483.html
-
old vintage poulan they say 63 ? http://akroncanton.craigslist.org/grd/5315314348.html
-
http://littlerock.craigslist.org/grd/5317182043.html
Mine....too much?
Scott (opinions please) B
-
http://littlerock.craigslist.org/grd/5317182043.html
Mine....too much?
Scott (opinions please) B
Yeah about $200 too high. You might get that on eBay or maybe on Arboristsite if the right buyer comes along. It looks to be a good runner saw but not a cherry shelf queen like some of those guys like bidding up to the moon.
Are you selling the Jonsereds too?
-
Not a chance on letting loose on the J'reds.... ;D
Thanks for the info.
Scott (tag your it) B
-
new echo 800P $650 http://akroncanton.craigslist.org/grd/5346888708.html
-
Good looking husqvarna 181 SE $450 http://mansfield.craigslist.org/grd/5393369196.html
-
husqvarna 61 $200 http://akroncanton.craigslist.org/tld/5388775620.html
-
Stihl sign https://mansfield.craigslist.org/atq/5457737091.html
Not one I am into, so sharing info ;)
-
2 old saws for $50 http://mansfield.craigslist.org/grd/5475147724.html
mcculloch 1-42 80cc it appears I think early 60's
-
Mall model 7 2 man it says. http://mansfield.craigslist.org/grd/5454670843.html
-
$10 poulan 3400 http://tuscarawas.craigslist.org/tls/5508458582.html
-
$35 stihl 170 http://cleveland.craigslist.org/tls/5508520051.html
-
$75 poulan 3400 http://akroncanton.craigslist.org/grd/5507070395.html
-
$60 poulan 3400 http://akroncanton.craigslist.org/grd/5508230457.html
-
Man I cant believe how cheap the 2 mans are I have sat here drooling over that mall 7 and its price
-
Man I cant believe how cheap the 2 mans are I have sat here drooling over that mall 7 and its price
One guys shop barn I visit has a couple laying in the way in his floor. He trys to sell them to me cheap. But I am like heck no I dont want to be tripping on them on my floor too.
-
Whats he got Looking for some parts for my mac 1225A
-
Whats he got Looking for some parts for my mac 1225A
I'll check next time there. Might be awhile now.
-
no worries how far to Idaho from where the saws are
-
no worries how far to Idaho from where the saws are
http://www.distancefromto.net/distance-from/Ohio/to/Idaho
1639 miles 2638 km
-
Old homelite 4 20 bow saw with long big bow bar http://mansfield.craigslist.org/grd/5654367457.html
-
man I would like to add something like that to my collection I can just sit and drool over some of the craigslist posts you put up Kev Bow bars never made it down under been looking for a long while for one to fit a 10 series mac
-
pioneer 1200A 1200 http://mansfield.craigslist.org/grd/5750938835.html
-
Seller is a member here and I know them a bit and have dealt with. Even though been awhile since down his way.
Poulan 245 A $75. http://mansfield.craigslist.org/grd/5755386014.html
-
Damn. Yet another "if it was local, I'd...." Poulan.
-
Damn. Yet another "if it was local, I'd...." Poulan.
I can pick up? He is about 30mins south of me.
Also check those 2 others I posted in that 245 thread. I didnt post pics but was looking for info ;) Dayton 2z462 and Poulan 306 sa
-
@Eccentric Dayton 2z462 and Poulan 306sa $100 for pair http://mansfield.craigslist.org/grd/5754856360.html
-
Seller is a member here and I know them a bit and have dealt with. Even though been awhile since down his way.
Poulan 245 A $75. http://mansfield.craigslist.org/grd/5755386014.html
I just showed this saw to Bradley and he said he would like to buy it if Aaron doesn't want it. To far of a ride from here though.
-
Seller is a member here and I know them a bit and have dealt with. Even though been awhile since down his way.
Poulan 245 A $75. http://mansfield.craigslist.org/grd/5755386014.html
I just showed this saw to Bradley and he said he would like to buy it if Aaron doesn't want it. To far of a ride from here though.
Looks like someone else already grabbed it. CL Post deleted.
-
Dangit. That's what I get for not checking in here often enough.
Kevin I think I will pass on the 306's. Already have a nice one. Thanks though.
-
Poulan Counter Vibe & Craftsman Black and Blue 20" are tempting me-> http://seattle.craigslist.org/tac/tls/5780010232.html
-
Poulan Counter Vibe & Craftsman Black and Blue 20" are tempting me-> http://seattle.craigslist.org/tac/tls/5780010232.html
Buy now. That 3.3 black blue is like one I just got in. Sweet saw. 335 with 3450 piston It would take 125-150 to get mine.
The 3400 50-75 and if it was special numbering like one I sold 100.
-
Yep, just look at it and begin to drool...it still even has the red vinyl piece over the start/kill switch.
-
Yep, just look at it and begin to drool...it still even has the red vinyl piece over the start/kill switch.
(http://chainsawrepair.createaforum.com/index.php?action=dlattach;topic=1732.0;attach=19012;image)
-
Looks like a Poulan Pro 380 non runner on flea bay but the shipping charges are heavy. Don't see them often anymore, running or not.
http://www.ebay.com/itm/Poulan-Pro-330-380-60cc-chainsaw-/272381516085?hash=item3f6b341935:g:1kcAAOSwTA9X3s-A
-
50 chainsaw for 150 or best offer. http://mansfield.craigslist.org/grd/5911277712.html
(https://images.craigslist.org/00i0i_anfJg8R9ut0_600x450.jpg)
-
36" Mac rollernose bar and chain $75 http://mansfield.craigslist.org/grd/5911888308.html
-
http://kelowna.craigslist.ca/tls/5911675790.html
This guy is on drugs lol
http://kelowna.craigslist.ca/tls/5901492078.html
A little over priced too.
-
Don't forget Roy those are Canadian dollars and no tax.
I just sold my worn out 066Redlight and 10mm 044 for a $1000. Saws still run strong even though they don't look so good :D
35 years ago when logging I could sell my year old completely worn saw to a homeowner for $300 and the saw would keep going for years for the little cutting they do.
Pro saws do have a good reputation and sell well. Especially when owned by a pro ;)
Here's a pic of my favorite Stihls on my bench. Just took this picture a few minutes ago.
The guy who bought my 066 and 044 brought them in this morning to get the 066's starter rope replaced and he wants a 20" b/c on the 044. I let him keep the 25" bar that was on it as a bonus.
He's a carver and gave them a good work out already, I even admitted to him the 066 at 24 yrs old never had its cylinder removed and still has its original carb diaphragms. Still idles perfect and runs like a champion. I think its heated carb might have something to do with the diaphragms longevity, constant thermostatically controlled at 77 F.
My 090 also is the same age and still has the original diaphragms and runs perfect. 8) I always ran it dry of fuel before put in storage.
Getting the 090 ready to mill some 10"x10" for February's competition.
(http://chainsawrepair.createaforum.com/index.php?action=dlattach;topic=6216.0;attach=19605;image)
-
Just missed. Guy before me got it this morning off CL. Stihl 440 with 24" $300.
Was just going to flip it anyways to a friend local.
pic shown
-
That was a clean one.
-
Nice looking 460. Bit much IMO $600
https://mansfield.craigslist.org/bar/6079596466.html
(https://images.craigslist.org/00f0f_a2fFORv6He6_600x450.jpg)
-
stihl 440 $550 still a bit much but still sharing
https://akroncanton.craigslist.org/grd/6074368826.html
(https://images.craigslist.org/00B0B_kxMdaJvRicQ_600x450.jpg)
-
Poulan 245 $40
https://akroncanton.craigslist.org/grd/6074169722.html
(https://images.craigslist.org/00o0o_fakXgo6gkMz_600x450.jpg)
-
another stihl 440 $575
https://images.craigslist.org/01212_35TgcaEciwE_600x450.jpg
(https://images.craigslist.org/01212_35TgcaEciwE_600x450.jpg)
-
Wish I could spare the change even though I don't need it
https://kelowna.craigslist.ca/grd/6116989660.html
-
Have past on them for half that here.
-
There's one listed at home for $325.
-
Nice looking husqvarna 51 with extras for sale local $120
-
Poulan pro 655 32" $250 this is closer to the $200 I see local. Not like the inflated ebay or online sell prices.
https://nwct.craigslist.org/tls/6197011873.html
-
husqvarna 385xp full wrap $450. local if needed checked. https://mansfield.craigslist.org/grd/6202064497.html
-
stihl 084 $500 https://akroncanton.craigslist.org/grd/6203777626.html
2 bars 36 47or49
-
Someone in Ohio selling all of this.
Selling my 30 year collection. See anything you like or would like information on, please message me. Location is in Ohio. Various prices.
Saws include: Remington Super 754, Remington Super 770 G, David Bradley 3 D22, Mono AH47, David Bradley 917.60003, David Bradley direct drive D21, David Bradley ? model, David Bradley 917.60006, McCulloch direct drive Mode super 44, McCulloch 200, McCulloch D44, Clinton 6HP D35 1100, McCulloch Mac 15, Lancaster 6HP Super-Light, Strunk SPKM, Wright Saw GS2520, Wright Saw GS2520, Wright Saw GS2520, Homelite Zip, David Bradley 917.61403, Bolens 3300, Clinton 3A3 (x2), McCulloch 47, Homelite, McCulloch 47, Clinton D-4 (x2), Homelite 500, Poulan 306A, Montgomery Ward WD55T, Homelite 150 Automatic, Homelite XL Automatic (x2), McCulloch 549, McCulloch 940/SOLD, Wright C50, Stihl 090, McCulloch 47, Clinton D65, Mall 2MG, Mall 7GA, Mall 7 (x2), McCulloch Pro Mac 10-10S, McCulloch Pro Mac 10, Stihl 031AV, Homelite XL Automatic, Stihl 015, Stihl 011AVT, Stihl MS192T, Stihl 011AVT, Stihl 019T, Stihl 029, Stihl 041AV
-
Nothing really exciting. I'd like to have that PM 10-10S, but it's not a big ticket item. They were ported a bit more aggressively than the other 54-57cc 10 series.
Already got one that'll get completed whenever I finish the 2 dozen projects ahead of it.....
-
Poulan pro 655 32" $250 this is closer to the $200 I see local. Not like the inflated ebay or online sell prices.
https://nwct.craigslist.org/tls/6197011873.html
Kevin next time you see another one of these (or a Pioneer P-60/61/62 or a Pioneer/Partner P-65) local please give me a heads up via text message. I'm still not getting most notifications from here. Once in a blue moon one will get through...
-
I've known about these for awhile now. Guy I know and have dealt with.
pioneer sale 655 , 525 , P65, P51, P52 , 455 , P45 , farmsaw , saws and parts , all plus shipping 600.00
farmsaw starts on prime
P52 on bench has fire but low compression,
(2)52 H motors on bench are possibly good were in a box full of dirt , need took apart and inspected but as they are they are included for this price
(10) recoil covers , seveal carbs , coils , bar covers , small items, handles all pictured goes
3 saws on side in first pic all have compression, i just havent messed with them but i would almost bet all 3 will run with very little work
no bars or chains , there is a brake in one pic on floor its gone but last pic brake cover is here with band missing
-
Quite a bit of stuff there.
-
Poulan 4000 $30 says runs
Not local to me