Chainsaw Repair

Husqvarna - Stihl - Poulan - Jonsered - Dolmar chainsaws and more => Husqvarna => Topic started by: wild262 on February 14, 2015, 09:39:39 am

Title: Used 562 for rebuild
Post by: wild262 on February 14, 2015, 09:39:39 am
What would be the Max price to pay for a complete (less B/C) Husky 562xp with scored P/C?    Cases look very good & clean.  Also, is there any certain years of this saw to shy away from due to mech. issues?  I do know there were some giving problems when they first came out.  Wanting one of these for my personal use and not to resell.   I'm new to this site, but have been a reader of it a long time.  Many thanks in advance.





Title: Re: Used 562 for rebuild
Post by: farmboy on February 14, 2015, 10:07:51 am
New PC is around $220.  (See Spike60)  Do the math.  The early ones had a lot of problems bad carbs, coils, crankcases don't remember YM but you would be pretty safe w/2012 & newer.  To answer your question $150.
Shep
Title: Re: Used 562 for rebuild
Post by: wild262 on February 15, 2015, 03:08:29 pm
Thanks for your reply "farmboy".   That 562xp I was watching went for $250+.  At that price I will just wait awhile.  My modded ole 262xp still gives me a smile for now. :)  Working on a 61/272 blend at the moment so my bench is occupied anyway.  Good day.